Narrow by category
Counts based on the first
4198 matches.
Showing 321–340 of 4198 results
-
Soldering
€82.79excl. VAT€101.00incl. VAT
Pair of 3 mm active blade tips from the RTWMS series for the WTMT MS desoldering micro tweezers. With the heater built into the cartridge they reach working temperature in about 5 seconds. Ideal for SMD rework, they are supplied as standard with the WT2023M station.
-
LEDs
€1.15excl. VAT€1.40incl. VAT
Diffused green flashing LED, 3 mm diameter; wavelength 565 nm; luminous intensity: (Vf=9V) 5-32mcd, viewing angle: 60°.
-
LEDs
€0.08excl. VAT€0.10incl. VAT
Indicator diode with a 60-degree beam and 10 mcd intensity, for status lights on panels and printed circuit boards.
-
Soldering
€2.05excl. VAT€2.50incl. VAT
3 mm replacement tip for the VTSSC10N, VTSSC20N, VTSSC30N and VTSSC40N soldering stations.
-
LEDs
€0.08excl. VAT€0.10incl. VAT
Indicator diode with 60-degree beam angle and 10 mcd intensity, for panel and PCB indicator lights.
-
Electronic components
€2.30excl. VAT€2.80incl. VAT
ABS mini submersible pump, fitted with a DC motor and stainless steel motor shaft. Ideal for aquariums, small fountains, etc.
-
LEDs
€7.38excl. VAT€9.00incl. VAT
High brightness green Super LED, 3 W, over 50,000 hours of operation
-
Light bulbs
€7.38excl. VAT€9.00incl. VAT
Dichroic lamp fitted with a 3 W neutral white LED
-
LEDs
€2.62excl. VAT€3.20incl. VAT
RGBW LED (red, green, blue and white) with 8 pins and 3 watt of power
-
Light bulbs
€12.30excl. VAT€15.00incl. VAT
Lamp fitted with 3 x 1 W yellow-light LEDs
-
Battery holders
€0.78excl. VAT€0.95incl. VAT
Plastic battery holder for three AA cells
-
RCA connectors
€3.20excl. VAT€3.90incl. VAT
3 x RCA female / 3 x RCA female adapter
-
Sensors
€4.51excl. VAT€5.50incl. VAT
Digital 3-axis accelerometer based on the Freescale MMA8452Q sensor
-
Sensors
€7.38excl. VAT€9.00incl. VAT
Small board based on the InvenSense MPU-6050 sensor, which contains a 3-axis MEMS gyroscope and a 3-axis MEMS accelerometer
-
Sensors
€4.02excl. VAT€4.90incl. VAT
Analog 3-axis accelerometer based on the ADXL345 chip by Analog Devices
-
CNC accessories
€61.48excl. VAT€75.00incl. VAT
Based on the Toshiba TB6560AHQ chip, it can drive up to 3 bipolar or unipolar stepper motors at 3 A (3.5 A peak)
-
Accessories
€1.56excl. VAT€1.90incl. VAT
3-blade propeller, 40 mm diameter, with a centre hole for motors with a 2 mm shaft
-
Amplifiers & mixers
€12.30excl. VAT€15.00incl. VAT
Built around the TDA2050 and two TDA2030s, this amplifier has a 32 watt output for the bass, an 18 watt output for the right channel and 18 watt for the left channel, a 3.5 mm jack socket for the audio input, adjustment potentiometers (volume, bass and treble), an auxiliary 12 Vdc – 1.5 A output (handy for powering small MP3 players or the like) and a heat sink
-
Radio remote controls
€19.67excl. VAT€24.00incl. VAT
Compact 3-channel handheld transmitter with HCS 300 encoder
-
Controllers & drivers
€43.44excl. VAT€53.00incl. VAT
Features three channels: bass, mid and treble