TEMT6000 Ambient Light Sensor
€2.21excl. VAT€2.70incl. VATSmall visible-spectrum sensor built around an NPN phototransistor
Narrow by category
All
Robotics › Sensors187
Enclosures143
Arduino compatible115
Raspberry Pi115
Breakout boards › Sensors112
Buttons, switches & joysticks109
Actuators100
Soldering100
Arduino94
Resistors86
Displays84
Lab cables83
LEDs83
Light bulbs78
Counts based on the first 4198 matches.
-
Sensors -
SensorsTEMT6000 Ambient Light Sensor with Strip
€2.05excl. VAT€2.50incl. VATThis module uses the TEMT6000 light sensor for ambient light detection. With peak sensitivity at 570 nanometres and a wide 60-degree acceptance angle, the sensor measures the amount of visible light, excluding the infrared (IR) spectrum.
-
GamesTennis Video Game – solder-it-yourself kit
€20.49excl. VAT€25.00incl. VATWith this kit you can build the classic tennis video game, working on TV sets with PAL and NTSC systems (selectable)
-
Terminal blocksTERMINAL BLOCK, 6 POSITIONS – 15A 600VAC
€1.23excl. VAT€1.50incl. VAT6-position, dual-row barrier terminal block, screw clamping, with clear protective cover
-
Lab cablesTest Leads with Banana Plugs and Crocodile Clips
€2.05excl. VAT€2.50incl. VATPair of leads (red and black) with a 4 mm banana plug at one end and a crocodile clip (about 35 mm long) at the other
-
Lab cablesTest leads with black clips
€5.33excl. VAT€6.50incl. VATPack containing 10 colored leads, about 25 cm long, with a 1-pin female connector at one end and a black test clip at the other.
-
Lab cablesTest leads with blue clips
€5.33excl. VAT€6.50incl. VATPack of 10 coloured leads, about 25 cm long, with a 1-pin female connector at one end and a blue test clip at the other.
-
Lab cablesTest Leads with Red Clips – 10 pcs
€5.33excl. VAT€6.50incl. VATPack of 10 coloured leads, about 25 cm long, with a 1-pin female connector at one end and a red test clip at the other.
-
DisplaysTFT Display 2.4″ Resistive Touch with ILI9341 Controller and SD Slot
€16.31excl. VAT€19.90incl. VATActive matrix TFT display with a 2.4″ resistive touch screen, ILI9341 graphics controller, 320×240 pixel resolution, 262,00 colours, white LED backlight, 1×14 pin connector, SD card slot and SPI interface
-
DisplaysTFT Display 2.8″ Resistive Touch with ILI9341 Controller and SD Slot
€18.77excl. VAT€22.90incl. VATActive matrix TFT display with 2.8″ resistive touch screen, ILI9341 graphics controller, 320×240 pixel resolution, 262.00 colours, white LED backlight, 1×14 pin connector, SD card slot and SPI interface
-
Thermometers & hygrometersThermal Imaging Camera (-20°C to +400°C) + 16GB SDHC
€228.69excl. VAT€279.00incl. VATThermal imaging camera used to measure the temperature of objects and surfaces without contact, showing the temperature differences across the whole measured area
-
AccessoriesThermal Paste – 0.8 grams
€0.25excl. VAT€0.30incl. VATPackage containing 8 grams of graphite thermal paste, with high thermal conductivity (> 1.93 w/m-K) and able to withstand high temperatures (300°C)
-
AccessoriesThermal Paste Tube, 5 grams
€2.95excl. VAT€3.60incl. VATWhite thermal paste with high thermal conductivity (> 1.2 W/m-K), able to withstand high temperatures (200°C)
-
Thermometers & hygrometersThermo-hygrometer with USB interface
€118.03excl. VAT€144.00incl. VATDigital thermo-hygrometer with LCD display, USB interface and reading memory (up to 32.700)
-
Peltier cellsThermoelectric Peltier Module (TEG) 5.4 V – 1 A
€37.70excl. VAT€46.00incl. VATThermoelectric Peltier module (TEG) that converts a heat source into electricity
-
Weather sensorsThermometer and Hygrometer with Date and Time
€4.10excl. VAT€5.00incl. VATFitted with a large, easy-to-read LCD display, this digital thermometer shows the indoor room temperature from -10°C to +50°C, humidity 10% ~ 99% RH, the date and the time in 12- and 24-hour format. It runs on a single 1.5 V AAA battery (not included – see related products). Ideal for measuring room temperature and humidity. Wall or desk mounting. Dimensions (mm): 105x98x24.
-
GSM/GPRS -
AccessoriesThread adapter 3/8″ – 5/8″
€0.74excl. VAT€0.90incl. VATMetal adapter for 3/8″ – 5/8″ threads (internal mounting).
-
SensorsThree-axis digital compass module with QMC5883L chip
€4.75excl. VAT€5.80incl. VATElectronic compass module with a three-axis magnetic field sensor, based on the QMC5883L chip. It is the ideal solution for projects that need accurate heading and orientation sensing.
-
Other home productsThree-band stereo tone control for bass, mid and treble
Price range: €16.00 through €29.00 incl. VATSet bass, mid and treble accurately with this three-band stereo tone control, ideal for tailoring the sound and improving audio quality in any room.