MAX3232
€4.92excl. VAT€6.00incl. VATConverts logic-level signals to RS-232 serial port levels and back, operating from a single 3 to 5 volt supply.
Electronic components
775 products
Narrow by category
-
Special functions -
Operational amplifiersMAX412 – Maxim Precision Amplifier IC
€10.25excl. VAT€12.50incl. VATTwo precision op-amps in an 8-pin PDIP package, for measurement chains and signal conditioning.
-
Operational amplifiers -
Special functionsMAX7219CNG LED driver IC
€3.28excl. VAT€4.00incl. VATLED display driver in a 24-pin DIP package, driving digits and matrices in place of the microcontroller.
-
Voltage regulatorsMC33063AP1 DC-DC Converter 3-40 V 1.5 A DIP8
€1.31excl. VAT€1.60incl. VATDC-DC converter 3-40 Vdc 1.5 A, DIP8 package.
-
Special functionsMCP23017-E/SP I2C I/O Expander
€3.93excl. VAT€4.80incl. VATThe MCP23017-E/SP is a GPIO (General-Purpose Input/Output) expander in an SPDIP-28 through-hole package. It offers a convenient 16-pin I/O expansion for I2C or Serial applications, with the flexibility to configure those pins as inputs or outputs
-
Special functionsMCP3905A-I/SS
€4.26excl. VAT€5.20incl. VATMicrochip IC that works as an active power meter in circuits connected to the single-phase mains distribution line
-
MicrocontrollersMCP39F511N – Power Monitor IC
€6.56excl. VAT€8.00incl. VATElectric energy meter ( Power Monitor IC ), low-power, ideal for electrical system designers and hardware engineers. With accuracy better than 0.5% across a wide dynamic range, this Power Monitor IC delivers precise measurements of voltage, current, active and reactive power.
-
Operational amplifiersMCP6002 Operational Amplifier – DIP8
€0.98excl. VAT€1.20incl. VATThe MCP6002 is a dual general-purpose operational amplifier with rail-to-rail input/output. This amplifier has a typical GBWP (gain bandwidth product) of 1 MHz with a quiescent current of 100 µA
-
Control electronicsMechanical Endstop
€1.64excl. VAT€2.00incl. VATBuilt around a micro switch and a status LED, this small board is well suited for use as an endstop on 3D printers or CNC machines
-
Buttons, switches & joysticksMetal Anti-vandal Pushbutton
€2.38excl. VAT€2.90incl. VATMetal anti-vandal pushbutton, OFF/(ON) type, with NC/NO/C contacts (normally open / closed and common)
-
LEDsMetal LED Holder for 3mm LEDs
€0.20excl. VAT€0.25incl. VATMetal LED holder for 3mm diameter LEDs with a plastic locking part.
-
LEDsMetal LED Holder for 5 mm LEDs
€0.25excl. VAT€0.30incl. VATMetal LED holder for 5 mm LEDs, with a plastic part for locking.
-
Buttons, switches & joysticksMetal Microswitch with Roller Lever
€2.38excl. VAT€2.90incl. VATFitted with a sturdy metal roller lever
-
Special functionsMGC3130-I/MQ – Proximity Sensor
€8.03excl. VAT€9.80incl. VATThe Microchip MGC3130 3D gesture tracking and recognition controller is the first three-dimensional (3D) gesture tracking and recognition controller based on electric field (E-field) technology
-
Voltage regulatorsMIC2941 Regulator
€3.11excl. VAT€3.80incl. VATAdjustable-output linear regulator delivering up to 1 A, to derive a stable voltage from a higher supply.
-
Electronic componentsMicro SD Storage Board
€4.51excl. VAT€5.50incl. VATCompact board with a micro SD memory card slot, SDIO and SPI interfaces, a 2.54 mm pitch pin header and a status LED for the 3.3V supply
-
Electronic componentsMicro SD to SD Card Adapter – Low Profile
€5.33excl. VAT€6.50incl. VATLow-profile micro SD card to SD card adapter
-
MicrocontrollersMicrochip Flash MCU – TQFP 64-pin – 53 I/O
€5.33excl. VAT€6.50incl. VATMicrochip PIC24FJ64GA006-I/IT microcontroller, Flash, 64-pin TQFP, 53 I/O ports – 64K Flash program memory.
-
MicrocontrollersMICROCHIP FLASH MICROCONTROLLER 53 I/O PINS
€8.20excl. VAT€10.00incl. VATPIC24HJ256GP206 Microchip Flash microcontroller, 64-pin TQFP, 53 I/O ports – 256K Flash program memory.