NTC Thermistor 100 K
€0.57excl. VAT€0.70incl. VATEpoxy-coated thermistor; nominal resistance 100 kohm; B constant (~7%) 4400°K; thermal dissipation constant 6 mW/°C; maximum current 15 mA; thermal time constant 16 s; size Ø 5 mm.
Components & enclosures
1,250 products
Narrow by category
-
LDRs, thermistors & varistors -
LDRs, thermistors & varistorsNTC thermistor 100 kohm
€4.92excl. VAT€6.00incl. VAT100 kohm NTC thermistor, suitable for measuring temperatures up to 300°C
-
Buttons, switches & joysticksOFF-ON Pushbutton Switch 3A – Black
€1.15excl. VAT€1.40incl. VATSquare off-on pushbutton switch, rating: 3 A – 125 V, dielectric strength: 1500 Vac, contact resistance: 30 Mohm (maximum value), insulation resistance: 100 Mohm
-
Buttons, switches & joysticksOFF/ON Pushbutton Switch 3A – Black
€1.15excl. VAT€1.40incl. VATPushbutton switch rated 3 A-125 V, dielectric strength/insulation resistance 1500 Vac/100 Mohm, contact resistance 20 milliohm max, service life (min) 100,000 operations
-
Buttons, switches & joysticksOFF/ON pushbutton switch 3A – Red
€1.15excl. VAT€1.40incl. VATON/OFF pushbutton switch 3 A-125 V suitable for a wide range of low-voltage applications.
-
Raspberry PiOfficial case for Raspberry Pi 3B +
€4.51excl. VAT€5.50incl. VATPlastic case for Raspberry Pi 3 type B+, black
-
Raspberry PiOfficial Case for Raspberry Pi Zero
€2.87excl. VAT€3.50incl. VATPlastic case for Raspberry Pi Zero and Raspberry Pi Zero W, white and red
-
DisplaysOLED Display I2C 0.96” – VCC/GND/SCL/SDA
€6.56excl. VAT€8.00incl. VATModule with a 128×64 pixel blue OLED (Organic Light Emitting Diode) display, I²C interface, SSD1306 graphic controller, viewing angle of about 180°, pin-compatible with the Espresso Lite board and easy to interface to Arduino
-
DisplaysOLED I2C display 0.96” – GND/VCC/SCL/SDA
€9.02excl. VAT€11.00incl. VATModule with a 128×64 pixel blue OLED (Organic Light Emitting Diode) display, I²C interface, SSD1306 graphics controller, viewing angle of about 180° and ready to interface with Arduino
-
DisplaysOLED SPI Display 256×64 – White Characters
€31.97excl. VAT€39.00incl. VATModule with OLED (Organic Light Emitting Diode) display, 2.08”, 256×64 pixels, white character colour, SPI interface, SH1122 graphic controller, viewing angle approx. >160°, interfaceable with Arduino
-
Buttons, switches & joysticksON/OFF SPST toggle switch 15A – 250Vac
€2.13excl. VAT€2.60incl. VATON/OFF toggle switch with metal body and screw terminals, ideal for AC circuits up to 250V – 15A.
-
Buttons, switches & joysticksON/OFF switch with red indicator light – 10A/250V
€1.23excl. VAT€1.50incl. VATCompact ON/OFF switch with a built-in red LED, so the power state can be seen at a glance.
-
Buttons, switches & joysticksON/ON TOGGLE SWITCH, PCB MOUNT, 90
€2.21excl. VAT€2.70incl. VATOn/On toggle switch for printed circuit boards, 90° mounting
-
Special functions -
Mechanical partsOpen Builds Cube 20X20 mm
€2.05excl. VAT€2.50incl. VATBlack anodised aluminium cube for making a right-angle joint between two or three 2020 series aluminium extrusions
-
TransformersOpen-frame Transformer 3.6VA 2x6V 250mA
€4.51excl. VAT€5.50incl. VATDelivers 6 V on each of the two outputs
-
TransformersOpen-Frame Transformer 6VA 2x12V 250mA
€6.15excl. VAT€7.50incl. VATProvides 12 V on each of its two outputs
-
TransformersOpen-frame transformer 9VA 2x9V 500mA
€6.15excl. VAT€7.50incl. VATProvides a voltage of 9 V on each of the two outputs
-
Mechanical partsOpenBuilds 6.35 mm eccentric spacer
€2.46excl. VAT€3.00incl. VAT6.35 mm eccentric spacer in stainless steel for OpenBuilds systems, with a Ø 5 mm bore
-
Mechanical partsOpenBuilds gantry plate
€4.92excl. VAT€6.00incl. VAT6 mm thick aluminium plate for building linear-motion gantry plates with OpenBuilds mini wheels