PUSHBUTTON CAP
€0.16excl. VAT€0.20incl. VATBlack plastic cap for the 8701 pushbutton
Components & enclosures
1,250 products
Narrow by category
-
Buttons, switches & joysticks -
Buttons, switches & joysticksPushbutton Changeover Switch with LED Indicator
€2.79excl. VAT€3.40incl. VATPushbutton changeover switch with LED indicator, contact rating: 5 mA – 24 Vdc, insulation resistance: 100 Mohm (250 Vdc megger), dielectric strength: 250 Vac for 1 minute (except between the LED terminals), electrical life: 200000 operations, operating temperature: -25
-
Buttons, switches & joysticksPushbutton Switch 250 V – 2 A
€1.48excl. VAT€1.80incl. VATMomentary contact that stays closed only while the button is held down: 3 A at 125 Vac or 1 A at 250 Vac.
-
IC sockets & adaptersQFP32 to DIP32 adapter PCB
€2.46excl. VAT€3.00incl. VATAdapter PCB for chips in a QFP32 package with 0.8 mm pitch to DIP32
-
Special functionsQUAD N-CHANNEL MOSFET
€6.48excl. VAT€7.90incl. VATFour small-signal N-channel MOSFETs in a 16-pin DIP package: 12 mA drain current and 10.6 V across the terminals.
-
SensorsRain Sensor with Control Electronics
€4.75excl. VAT€5.80incl. VATMade up of a board with a large sensing area (34×47 mm) on both faces plus control electronics, this product is particularly suited to detecting rain
-
LEDsRainbow-Shaped COB LED – Creative Lighting for DIY Projects
€3.77excl. VAT€4.60incl. VATCreate a magical atmosphere with this rainbow-effect mini COB LED, ideal for creative and DIY projects. Easy to hook up with crocodile clips or by soldering, this LED adds a warm, eye-catching touch of light to your projects.
-
MicrocontrollersRaspberry Pi RP2040 Microcontroller – SMD
€2.05excl. VAT€2.50incl. VATThe Raspberry Pi RP2040 is a dual-core Arm Cortex-M0+ processor
-
RTC (real-time clocks)Real Time Clock module with DS1307
€2.46excl. VAT€3.00incl. VATRTC module with DS1307, ideal for IoT projects. Other I2C devices can be daisy-chained.
-
RF receiversRECEIVER WITH 4-BIT OUTPUT AND HCS ROLLING CODE
€13.93excl. VAT€17.00incl. VATSuperheterodyne hybrid module containing a UHF radio receiver tuned to 433.92 MHz, with an OOK amplitude demodulator and an output pulse shaper, completed by a decoder that lets it respond correctly to the TX-12CH
-
Mechanical partsRecessed corner bracket for 2020 profiles
€0.66excl. VAT€0.80incl. VATL-shaped bracket, made of zinc alloy, perfect for creating a right-angle joint between two 2020 series aluminium profiles
-
Speakers, buzzers & micsRectangular Loudspeaker 3 W / 8 ohm
€1.89excl. VAT€2.30incl. VATLoudspeaker with a neodymium magnet and a 200 to 10,000 Hz response, 86 dB sensitivity: it measures 70.7 x 30.7 mm and weighs 20 grams.
-
Electronic componentsRectifier Diode Bridge 400V 4A
€1.23excl. VAT€1.50incl. VATDiode bridge, THT mounting, 4 amp current and 400V maximum reverse voltage
-
DisplaysRed 7-Segment Display – Common Anode
€0.57excl. VAT€0.70incl. VATCommon anode 7-segment red display
-
DisplaysRED CC DISPLAY 10X13
€0.98excl. VAT€1.20incl. VATRed seven-segment common-cathode display in a 10 x 13 mm package: operates from 1.6 to 2.8 V and dissipates up to 60 mW.
-
DisplaysRED COMMON-ANODE DISPLAY 10X13
€0.98excl. VAT€1.20incl. VATRed seven-segment common-anode display, 10 x 13 mm package: operates from 1.6 to 2.8 V and dissipates a maximum of 60 mW.
-
DisplaysRED COMMON-ANODE DISPLAY 13X18
€1.15excl. VAT€1.40incl. VATRed common-anode seven-segment display with 13.2 mm digit height and 2.54 mm pin pitch; operates from 1.6 to 2.8 V.
-
Displays
Red common-cathode 7-segment display
€0.57excl. VAT€0.70incl. VATCommon-cathode display with 7 red segments
-
LasersRed LASER diode 5 mW – 650 nm
€3.28excl. VAT€4.00incl. VAT5 mW LASER diode emitting at 650 nanometres, supply between 2.1 and 2.5 VDC, current draw: 25 mA max and TO-18 case
-
LasersRED LASER MODULE 10 mW – 640 nm
€63.11excl. VAT€77.00incl. VATLaser modules with red emission (640 nm) for industrial use, compliant with EN60825-1