2-Flute End Mill 6mm – 6mm Shank
€26.23excl. VAT€32.00incl. VAT2-flute end mill made specifically for aluminium and plastics
Instruments & tools
707 products
Narrow by category
-
CNC accessories -
Accessories2-Pole Female Connector with 20 cm Leads
€1.23excl. VAT€1.50incl. VAT2-pole female connector with 20 cm long leads, 2.54 mm pitch, nylon 66 housing (UL94V-0), rated voltage 50 Vdc max, current 3 A max.
-
CNC accessories2-Pole PCB Male Header
€0.16excl. VAT€0.20incl. VATPCB-mount male header, 2 poles with 2.54 mm pitch, nylon 66 housing (UL94V-0), 50 Vdc max rated voltage, 3 A max current.
-
Lamps, lenses & magnifiers2.5x-45x magnifying lens with LED illuminator
€6.15excl. VAT€7.50incl. VATLens with LED illuminator and 2.5x and 45x magnification factor
-
Soldering2.7 mm Chisel Replacement Soldering Tip
€8.11excl. VAT€9.90incl. VATThe IT02BK is a 2.7 mm chisel tip, ideal for heavier joints, wider pads and components with a larger contact area. Compatible with the HS02BS1 soldering iron.
-
Oscilloscopes & dataloggers -
CNC accessories20° Engraving Burin – 3 mm Shank
€3.69excl. VAT€4.50incl. VATCarbide-tipped bit for engraving PCBs, wood, acrylic and plastic: 7 mm cutting edge and 3.175 mm shank.
-
Oscilloscopes & dataloggers200 MHz 2-Channel Digital Oscilloscope with FFT
€391.80excl. VAT€478.00incl. VAT2-channel digital oscilloscope with 200 MHz bandwidth and 1 GS/s sampling. 7″ colour TFT display, built-in FFT function, automatic measurements and PC analysis software. Supplied with probes and USB cable, ideal for laboratories and professionals.
-
Soldering200W Fast-Heating Soldering Station with TFT Display
€118.85excl. VAT€145.00incl. VATThe DWS200S2 200W soldering station combines power, speed and precision. Fitted with a 2.8″ colour TFT display, digital temperature control and support arms, it is the ideal tool for labs, makers and professionals.
-
Tool sets26-Piece DIY Tool Set
€17.95excl. VAT€21.90incl. VATAll the essential tools for home and DIY jobs, organised in a handy case.
-
Multimeters & accessories2CH 70 MHz oscilloscope + waveform generator + multimeter
€220.49excl. VAT€269.00incl. VATHandheld two-channel digital oscilloscope with a function/arbitrary waveform generator up to 25 MHz at 12-bit resolution and a multimeter, all in a single instrument. It has a large 2.8-inch colour TFT LCD display with 320×240 pixel resolution, a built-in rechargeable battery, 70 MHz bandwidth, 250 MSa/s real-time sampling rate on a single channel, smart battery charge management (after each 2-hour charge the instrument runs continuously for a full day, or stays on standby for more than two months) and a self-calibration function
-
Lamps, lenses & magnifiers2x Magnifier with Ergonomic Handle – 100 mm
€4.92excl. VAT€6.00incl. VATGlass lens with 2 X magnification.
-
Multimeters & accessories3 ½ digit digital multimeter – 19 ranges
€21.72excl. VAT€26.50incl. VAT19-range digital multimeter (CE/CAT I 600V, CATII 300V), with a backlit 3 1/2 digit LCD display, able to measure direct currents up to 10 A, DC and AC voltages up to 500 V, resistances up to 20 Mohm, diodes, temperature and electrical continuity
-
Soldering3 mm blade tips for desoldering micro tweezers
€82.79excl. VAT€101.00incl. VATPair of 3 mm active blade tips from the RTWMS series for the WTMT MS desoldering micro tweezers. With the heater built into the cartridge they reach working temperature in about 5 seconds. Ideal for SMD rework, they are supplied as standard with the WT2023M station.
-
Soldering3 mm Tip for VTSSC10N/VTSSC30N/VTSSC40N
€2.05excl. VAT€2.50incl. VAT3 mm replacement tip for the VTSSC10N, VTSSC20N, VTSSC30N and VTSSC40N soldering stations.
-
CNC accessories3-axis board set + accessories
€61.48excl. VAT€75.00incl. VATBased on the Toshiba TB6560AHQ chip, it can drive up to 3 bipolar or unipolar stepper motors at 3 A (3.5 A peak)
-
Test & measurement3-in-1 Handheld Oscilloscope with Multimeter and Signal Generator
€143.44excl. VAT€175.00incl. VATPortable 3-in-1 instrument combining a 50 MHz dual-channel oscilloscope, a 4.5-digit digital multimeter and a DDS signal generator up to 10 MHz. 4.3″ IPS touchscreen for quick, intuitive measurements.
-
Various lab products3-in-1 Polystyrene Cutter with Mains Power Adapter
€26.23excl. VAT€32.00incl. VATOriginal tool for cutting any shape out of polystyrene
-
Special test instruments3-in-1 Wall Detector (wood, metal, live wires)
€27.87excl. VAT€34.00incl. VATParticularly useful before drilling a wall, this device can detect live electrical wires (with current flowing), wooden structures (frames, joists, battens, etc.) and metal objects (beams, frames, pipes, rebars, pins, metal bars)
-
Mounting systems3-Metre Double-Sided Tape
€1.23excl. VAT€1.50incl. VATRoll of double-sided tape, 10 mm wide, 3 metres long.