“S” type load cell – 100 kg range
€52.46excl. VAT€64.00incl. VATStainless steel “S” type load cell, C3 accuracy class, 100 kg range and two M12 threaded holes
Robotics & development
784 products
Narrow by category
-
Sensors -
Sensors“S” Type Load Cell – 500 kg Range
€52.46excl. VAT€64.00incl. VATStainless steel “S” type load cell, C3 accuracy class, 500 kg range and two M12 threaded holes
-
Sensors“S”-type load cell, 200 kg range
€52.46excl. VAT€64.00incl. VATS-type load cell made of stainless steel, C3 accuracy class, 200 kg range and two M12 threaded holes
-
Accessories“U” bracket for the G15 Cube Servo
€3.28excl. VAT€4.00incl. VAT“U” bracket that, combined with the G15 Cube Servo, lets you build moving joints for robots, such as multi-joint robotic arms and so on
-
Sensors1 kg load cell
€5.74excl. VAT€7.00incl. VATLoad cell made up of a metal body and small elements called strain gauges fitted at precise points on that body
-
Control electronics1-Channel DC Motor Driver 30 A
€44.26excl. VAT€54.00incl. VATCompact power driver able to run 1 DC motor with a supply voltage of max
-
Control electronics1-channel DC motor driver 6-30V – 20A
€27.87excl. VAT€34.00incl. VATThe MD20A provides bidirectional control of a brushed DC motor with a supply voltage between 6 and 30 VDC and a current of 20 A. It uses an NMOS H-bridge for better efficiency, which means no heatsink is needed
-
Actuators1-Channel Relay Module 5 Vdc 10 A (Assembled)
€4.10excl. VAT€5.00incl. VATModule with 1 relay to switch the connected load on and off, 240 V/10 A (max)
-
Control electronics1-Motor DC Driver, 40A – 4 Control Modes
€80.33excl. VAT€98.00incl. VATCompact power driver able to control 1 DC motor with a supply voltage between 10 VDC and 45 VDC and a max current
-
Actuators1-relay module 5 Vdc, low-level trigger (assembled)
€2.05excl. VAT€2.50incl. VATModule with 1 relay, two status LEDs (power and relay), a transistor and a diode
-
micro:bit1.8 inch display for MicroBit
€21.31excl. VAT€26.00incl. VATRGB display module with 65K colours designed for use with the micro:bit board, 1.8 inch diagonal, 160×128 pixels
-
Actuators1.8kg/cm Mini Servo Motor, Metal Gears, 180°
€6.56excl. VAT€8.00incl. VATMini servo with metal gears, accessories included
-
Arduino10 A Motor Shield for Arduino
€16.39excl. VAT€20.00incl. VATArduino shield based on an H-bridge made up of 4 NMOS transistors which, besides providing better efficiency, remove the need for a heatsink
-
Sensors10 kg Load Cell
€5.74excl. VAT€7.00incl. VATLoad cell made up of a metal structure and small elements called strain gauges mounted at precise points on the structure
-
Accessories10 Mounting Brackets for Metal Micro Gearmotors
€2.13excl. VAT€2.60incl. VAT10 brackets for MMG-series metal micro gearmotors.
-
Displays10″ resistive touchscreen display – 1024×600 pixels
€105.74excl. VAT€129.00incl. VAT10.1-inch colour display with resistive touchscreen, HDMI video input and a resolution of 1024×600 pixels
-
Displays11.9″ capacitive touch screen display with audio output – 320 x 1480 pixels
€113.93excl. VAT€139.00incl. VAT11.9″ HDMI capacitive touchscreen display with 320×1480 resolution, IPS panel, 6H tempered glass and HDMI+USB interface. Compatible with Raspberry Pi, PC and Jetson Nano.
-
Actuators -
Actuators12 VDC Gearmotor – 30 rpm – 8 kg·cm
€10.66excl. VAT€13.00incl. VAT12 Vdc gearmotor with a 200:1 reduction ratio, maximum torque 8 kg·cm, speed under load: 30 rpm, direction of rotation set by polarity
-
Motors12 Vdc Stepper Motor – 64 Steps, 1/64 Gearbox
€13.11excl. VAT€16.00incl. VATIdeal for any application that calls for precise angular positioning and rotation speed, such as robotics and servo mechanisms.