1-Channel DC Motor Driver 30 A
€44.26excl. VAT€54.00incl. VATCompact power driver able to run 1 DC motor with a supply voltage of max
Robotics & development + Control electronics
61 products
Narrow by category
-
Control electronics -
Control electronics1-channel DC motor driver 6-30V – 20A
€27.87excl. VAT€34.00incl. VATThe MD20A provides bidirectional control of a brushed DC motor with a supply voltage between 6 and 30 VDC and a current of 20 A. It uses an NMOS H-bridge for better efficiency, which means no heatsink is needed
-
Control electronics1-Motor DC Driver, 40A – 4 Control Modes
€80.33excl. VAT€98.00incl. VATCompact power driver able to control 1 DC motor with a supply voltage between 10 VDC and 45 VDC and a max current
-
Control electronics2 DC Motor / 1 Stepper Motor Driver Shield – 10 A
€26.23excl. VAT€32.00incl. VATArduino shield based on an H-bridge made up of 8 NMOS transistors which, besides improving efficiency, remove the need for a heatsink
-
Control electronics2-Channel Infrared Remote Control
€2.87excl. VAT€3.50incl. VATFitted with 2 buttons, this infrared remote control, paired with an IR receiver, can be used to turn lights or other devices on and off
-
CNC accessories3-axis board set + accessories
€61.48excl. VAT€75.00incl. VATBased on the Toshiba TB6560AHQ chip, it can drive up to 3 bipolar or unipolar stepper motors at 3 A (3.5 A peak)
-
Control electronics30A Speed Controller for Brushless Motors
€12.30excl. VAT€15.00incl. VATSpeed Controller for Brushless Motors. Ideal for drones, model aircraft and radio-controlled vehicles. Maximum current capacity 30A. 2-4S LiPo BEC at 5V/2A. Voltage range 4V-16V.
-
Infrared4-channel IR receiver with remote control
€5.74excl. VAT€7.00incl. VATSet consisting of an IR remote control and a 4-channel momentary receiver
-
Control electronics5-wire Stepper Motor + ULN2003 Driver
€4.51excl. VAT€5.50incl. VATSet made up of a stepper motor driver based on the ULN2003 chip and a 4-phase stepper motor
-
Control electronicsA4988 stepper motor driver board
€6.48excl. VAT€7.90incl. VATBased on the Allegro A4988 chip, this small driver can control a single bipolar stepper motor with a max current
-
Control electronicsBipolar Stepper Motor Driver 2.2A
€7.79excl. VAT€9.50incl. VATBuilt around the Texas Instruments DRV8825 chip, this small driver can control a single bipolar stepper motor with a max current
-
Control electronicsBoard for PS2 Controller
€26.23excl. VAT€32.00incl. VATFitted with a reset button, a jumper to set the Baud Rate (9600, 57600, 115200), a status LED and a power LED; lets you use the PlayStation 2 wireless (or wired) controller to remotely drive robots or other devices
-
Control electronicsBOMEGA168 – BABY ORANGUTAN MEGA168
€18.03excl. VAT€22.00incl. VATSmall 24-pin (DIP) board fitted with a driver to control two DC motors (max 1 A per motor), a trimmer and two indicator LEDs
-
Control electronicsBOMEGA48 – BABY ORANGUTAN MEGA48
€15.57excl. VAT€19.00incl. VATSmall 24-pin (DIP) board with a driver to control two DC motors (1 A per motor maximum), a trimmer and two indicator LEDs
-
Control electronicsBreakout Board for RGB Rotary Encoder
€3.52excl. VAT€4.30incl. VATBrings out the contacts of the RGB LED rotary encoder onto pads that are easy to wire; measures just 28 x 15 mm.
-
Control electronicsBrushless Motor Controller
€20.08excl. VAT€24.50incl. VATController for brushless motors with a supply voltage between 5 and 36 VDC and max
-
Control electronicsBRUSHLESS MOTOR DRIVER 7-12 VDC
€13.93excl. VAT€17.00incl. VATDriver for small 3-wire and 4-wire brushless motors (without Hall sensor) with a supply voltage between 7 and 12 Vdc, such as those found in hard disks, CD players, etc
-
Control electronicsBrushless motor driver with Hall sensor
€44.26excl. VAT€54.00incl. VATDriver for brushless motors fitted with a Hall effect sensor (e.g. electric scooters, hoverboards).
-
Control electronicsCarrier board for DRV8825 and 3DDRIVER
€3.28excl. VAT€4.00incl. VATThis small board was designed specifically to simplify the use of stepper motor driver modules such as the A4988, DRV8825, 3DDRIVER or others with the same pinout
-
Control electronicsClosed-loop controller for stepper motors
€45.08excl. VAT€55.00incl. VATClosed-loop stepper motor controller that dynamically checks the shaft position and prevents step losses in 3D printing, CNC machines and so on