CNC Shield for Arduino
€4.10excl. VAT€5.00incl. VATPaired with an Arduino (not included), this shield lets you drive a CNC router or a 3D printer
Robotics & development + Control electronics
61 products
Narrow by category
-
Control electronics -
Control electronicsCollision Sensor for Robots
€1.64excl. VAT€2.00incl. VATBuilt around a micro switch and a status LED, this small board is ideal for use as an anti-collision sensor on robots
-
Control electronicsControl board for 3D printers, CNC machines and plotters
€9.84excl. VAT€12.00incl. VATRAMPS (1.4) is a shield that, paired with an Arduino Mega or compatible board, controls a 3D printer, a small CNC milling machine or a plotter such as our polystyrene cutter (see related products).
-
Control electronicsDAGU AVR DC motor and RC servo controller
€12.30excl. VAT€15.00incl. VATProgrammable through the Arduino IDE and based on the ATmega8A microcontroller, this compact controller can drive 2 DC motors or 8 small RC servos
-
Control electronicsDAGU T’REX Driver board
€72.95excl. VAT€89.00incl. VATBuilt around the ATmega328P, DAGU’s T’REX driver board controls the speed and direction of two DC motors at 9A continuous (40A peak) and 4 RC servos at 6V
-
Control electronicsDC motor speed controller 10-40 VOLT 10A
€4.92excl. VAT€6.00incl. VATCompact board that lets you adjust the speed of a DC motor running from 10 V to 40 V and drawing up to 10 A, using a potentiometer
-
Control electronicsDC motor speed controller 3 to 35 V 5A
€4.51excl. VAT€5.50incl. VATCompact little board that lets you adjust the speed of a DC motor, with a supply between 3 V and 35 V and a maximum current of 5 A, through a potentiometer with an on/off switch.
-
Control electronicsDriver for 1 DC Motor, 25 A – 2 Control Modes
€67.21excl. VAT€82.00incl. VATThe MD25HV is a power driver with bidirectional control for 1 DC motor, with a supply between 7 VDC and 58 VDC. It can carry 25 A continuously without an additional heatsink. It has a terminal block for the motor and power connections, a 5 VDC output (max 250 mA) to power an external controller or other device, two test buttons that let you test the motor quickly and conveniently without connecting a controller, inputs for external control (PWM and DIR) and status LEDs for Power, Fault and Run.
-
Control electronicsDriver for 2 DC motors or 1 stepper – max 3 A
€10.25excl. VAT€12.50incl. VATCompact driver able to run 2 DC motors or one bipolar/unipolar stepper motor with a max supply voltage
-
Control electronicsDriver for 2 DC motors, 10 A – 4 control modes
€59.02excl. VAT€72.00incl. VATCompact power driver able to run 2 DC motors with a supply voltage between 7 Vdc and 35 Vdc and a max. current
-
Control electronicsDriver for the G15 Servo Cube
€7.38excl. VAT€9.00incl. VATPaired with Arduino or another microcontroller, this compact driver lets you control the G15 Servo Cube
-
Control electronicsDual DC Motor Driver 30 A – 4 control modes
€94.26excl. VAT€115.00incl. VATCompact power driver able to drive 2 DC motors with a supply voltage between 7 Vdc and 35 Vdc and a max
-
Control electronicsEasy Driver (V4.4) – Bipolar Stepper Motor Driver
€11.48excl. VAT€14.00incl. VATBased on the Allegro A3967SLB chip, this small driver can control a single bipolar stepper motor
-
Control electronicsExpansion Board for Raspberry Pi Pico and Pico W
€17.95excl. VAT€21.90incl. VATROBOPICO is the ideal expansion board for Raspberry Pi Pico and Pico W. With a DC motor controller, servo pins and Grove I/O ports, it is perfect for robotics and IoT projects. Compatible with CircuitPython, MicroPython, C/C++ and Arduino.
-
Control electronicsFour-Channel DC/Stepper Motor Driver Module – Direction and Speed Control
€14.34excl. VAT€17.50incl. VATDriver module for four DC stepper motors. With this module you can control DC motors reliably and cheaply for a wide range of robotics and automation applications.
-
Control electronicsInfrared Remote Control
€3.69excl. VAT€4.50incl. VATWith 21 buttons, this infrared remote control, paired with an IR receiver, can be used to control a robot, to switch lights or other devices on and off
-
Control electronicsJPEG Trigger shield for JPEG UART camera
€27.05excl. VAT€33.00incl. VATMakes the JPEG colour micro camera with UART interface (7300-JPEGCAMERA) simpler to use
-
Control electronicsL298 driver for DC/stepper motors
€5.66excl. VAT€6.90incl. VATBuilt around the ST L298N chip, this module was designed to accept standard TTL logic levels and drive inductive loads such as relays, solenoids, DC motors and stepper motors.
-
Control electronicsMaker Driver for 2 DC Motors or 1 Stepper Motor – max 1 A
€4.92excl. VAT€6.00incl. VATMaker Drive is a driver for 2 DC motors or 1 stepper motor, specifically designed to make it easier for makers, students, and hobbyists with little basic electronics knowledge, or who simply want to start controlling motors right away
-
Control electronicsMe Light and Grayscale Sensor V1.0
€7.38excl. VAT€9.00incl. VATFitted with a white LED and a photoresistor, Me Light Sensor is a module from the Makeblock Me series, designed to be simple to program and easy to connect