45 products
ESP8266 / ESP32Compact open-source development and prototyping board based on the ESP32 (ESP-WROOM-32), featuring 802.11 b/g/n Wi-Fi, dual-mode Bluetooth (classic and BLE), 26 GPIO, a charging circuit for lithium polymer batteries and a micro USB connector.
ESP8266 / ESP32Development board built around the ESP32 with Wi-Fi and Bluetooth, ideal for driving up to 18 servos. It runs on a battery (available separately) and carries on-board voltage regulators for a steady 5V supply. It also includes Neopixel RGB LEDs and programmable pushbuttons for custom lighting effects.
ESP8266 / ESP32This board is a development platform built around the Espressif ESP32 chip, a 32 bit dual-core Tensilica LX6 microcontroller with a 240 MHz clock, 520 kB of internal SRAM, Wi-Fi 802.11 b/g/n, dual-mode Bluetooth (Classic and BLE) and 28 I/O pins
ESP8266 / ESP32Combines Wi-Fi, Bluetooth and a 2-megapixel camera on a board programmable with the Arduino IDE, with a microSD slot.
ESP8266 / ESP32Built around the ESP8266 Wi-Fi module and with an Arduino Uno compatible form factor, this board lets you build applications that need Wi-Fi connectivity together with the ease of use of Arduino
Wi-Fi modulesSmall Wi-Fi transceiver module based on the ESP8266 chip, compliant with the 802.11 b/g/n standard at 2.4 GHz, with a serial interface and a PCB antenna
ESP8266 / ESP32Built around the ESP03 Wi-Fi module, this small, compact board (assembled and tested) measures the environmental parameters of a room, of a spot in your own home or of any other kind of building, and publishes the readings to the Cloud
ESP8266 / ESP32Espresso Lite V2.0 is the first low-cost Arduino-compatible development board based on the Espressif System ESP8266 WROOM-02 WiFi module
FishinoFishino UNO Rev.2 is a board based on the ATmega328pb with WiFi connectivity, a real time clock and a microSD card reader
FishinoFishino GUPPY is a board 100% compatible with the well-known Arduino NANO
IoT (Internet of Things)4 channel HSD (High Side Driver) board, able to control a load of up to 1 A per channel
IoT (Internet of Things)2-channel infrared board that interfaces with two GP2Y0D810Z0F infrared proximity sensors
ESP8266 / ESP32Maduino Zero ESP is an IoT (Internet of Things) solution based on the Atmel 32-bit SAMD21 microcontroller and on the ESP-12S Wi-Fi module built around the ESP8266 SoC (System on Chip). It complies with the 802.11 b/g/n standard at 2.4 GHz and features an integrated TCP/IP stack, 19.5 dBm output power, data interfaces (UART / HSPI / I2C / I2S / Ir Remote Control GPIO / PWM) and an on-board PCB antenna
ESP8266 / ESP32This ESP32-C3 SuperMini development board is a compact, all-in-one solution for IoT and embedded projects. With built-in wireless connectivity, low power consumption and a dual-core processor, it delivers high performance and versatility. Its versatile interfaces allow for a wide range of external connections, while support for various development environments makes it user-friendly
IoT (Internet of Things)The Power Board (PB) is a board in the Mercury system that tackles the problem of power management, in particular for connected and IoT devices. Although the Base Board (BB110) does carry a simple power supply and a LiPo charging system, that is not enough to meet the power requirements of every application, and so another family of boards was introduced: the power boards (PB)
IoT (Internet of Things)Small board for the Mercury system with a prototyping area and provision for fitting a connector to take the ESP8266 Wi-Fi module (not included)
IoT (Internet of Things)Expansion board for the Mercury system
IoT (Internet of Things)Mercury system peripheral board with two relays on screw terminals and a four-way dip switch for the bus address.
IoT (Internet of Things)Rotilio Maker is an Arduino-compatible shield that lets you get the most out of the Particle Photon Wi-Fi IoT module
IoT (Internet of Things)Trace&Follow, developed by RedSmart (a business unit of IDT), is an advanced device for monitoring energy consumption in industrial machinery. With BLE, WiFi and Ethernet connectivity plus a LoRa expansion for LoRaWAN, Trace&Follow acquires digital signals, drives outputs and sends data over MQTT to a configurable broker.
Open-Electronics.org is the brainchild of a world leader in hobby electronics Futura Group srl. Open-Electronics.org is devoted to support development, hacking and playing with electronics: we share exciting open projects and create amazing products!
Open-Electronics.org is not just a container of ideas: it is also a web site lead by a team of engineers and geeks who will take part in the discussions and give support.
Our mission is to become a reference Open Source hacking site with ideas and feedback aimed to enrich the community.
