Red LED Signal Light 12V
€5.33excl. VAT€6.50incl. VATNavigation light for RC models, also usable as a warning light, highly efficient, for a wide range of applications.
Robotics
426 products
Narrow by category
-
Modelling -
AccessoriesRed robot chassis
€7.38excl. VAT€9.00incl. VATLaser-cut chassis in transparent red acrylic, its diameter (about 12.7 cm) is slightly larger than a CD, with numerous holes and slots for mounting sensors, motors (in particular DGEARBOX), wheels, ball casters (BCASTER) and more
-
Control electronicsReed switch module with LM393
€2.05excl. VAT€2.50incl. VATCompact module based on the LM393 chip, fitted with a reed contact (single normally open contact), a sensitivity adjustment trimmer and status LEDs for power and output signal
-
SensorsReflectance sensor – 2 pcs
€6.15excl. VAT€7.50incl. VATReflectance sensor made up of an infrared emitter diode and a phototransistor
-
SensorsREFLECTIVE OPTICAL SENSOR
€2.05excl. VAT€2.50incl. VATReflective optical sensor from Vishay Telefunken, made up of an infrared emitting diode and a phototransistor
-
Serial remote controlRelay control board
Price range: €54.00 through €89.00 incl. VATThis relay board can be used in many applications: stand-alone mode, or addressed by switches or open-collector outputs
-
ActuatorsReplacement Track for Rover
€6.56excl. VAT€8.00incl. VATRubber track for use as a replacement part for the Rover 5 robot
-
Rear-view systemsReplacement Ultrasonic Sensor for FR625
€4.02excl. VAT€4.90incl. VATReplacement ultrasonic parking sensor for the “licence plate holder with camera” product, code FR625PAL (see related products). The parking sensor has a detection range of 0.4 to 2 metres, a 60° detection angle and an operating temperature of -30°C to +80°C
-
RobotsRobot base Chassis+Wheels+Motors+Battery holders
€13.03excl. VAT€15.90incl. VATRobot base made up of two clear acrylic chassis plates, two geared motors, two encoder discs (without the detector), two 65 mm diameter wheels with soft rubber tyres 26 mm wide, 1 castor wheel, 2 battery holders for 4 AA 1.5 V cells (not included), 2 switches, connecting leads for the geared motors, screws, nuts and spacers.
-
RobotsRobot Chassis Set with Wheels, Motors and Battery Holder
€7.79excl. VAT€9.50incl. VATRobot base made up of a clear acrylic body, two gearmotors, two encoder discs (sensor not included), two 65 mm diameter wheels with 26 mm wide soft rubber tyres, a ball caster, a holder for 4 x 1.5 V AA batteries, a switch, screws, nuts and spacers.
-
RobotsRobotic arm with 5-motor manual control – STEM educational kit
€47.54excl. VAT€58.00incl. VATStep into the fascinating world of robotics and discover its basic technologies by building a prototype mechanical arm with five motors and five joints
-
AccessoriesRotatable Connector for G15 Cube Servo
€1.07excl. VAT€1.30incl. VATThis connector, fitted in place of the fixed one on the G15 Cube Servo (on the side opposite the rotating part), lets it rotate when used with a “U” joint
-
SensorsRound force sensor – 2 Kg
€9.02excl. VAT€11.00incl. VATRound force sensor made up of a pressure-sensitive layer on the top, a thin film and a conductive circuit on the bottom layer
-
SensorsRound Force Sensor – 20g-10Kg
€14.59excl. VAT€17.80incl. VATThis sensor changes its resistance value according to the force applied to its sensitive area
-
SensorsRound force sensor – 20g-6Kg
€7.38excl. VAT€9.00incl. VATRound force sensor made up of a pressure-sensitive layer on top, a thin film and a conductive circuit on the bottom layer
-
SensorsSealed Ball Tilt and Vibration Sensor, Ø5 x 12 mm
€0.82excl. VAT€1.00incl. VATMechanical ball motion sensor that detects movement, tilt or vibration
-
Control electronicsSerial driver for DC motors
€22.95excl. VAT€28.00incl. VATMotor driver (kit), interfaced to a microcontroller’s serial port, can independently control up to 2 DC motors at 1 A each (forward, reverse and speed control in 127 steps)
-
AccessoriesServo cable extension – 150 mm long
€1.07excl. VAT€1.30incl. VATExtends the lead of a servo by 150 mm.
-
AccessoriesServo Cable Extension – 300 mm Long
€1.64excl. VAT€2.00incl. VATAdds 300 mm to the length of a servo lead.
-
AccessoriesSERVO CABLE EXTENSION – 600 mm LONG
€2.05excl. VAT€2.50incl. VATAdds 600 mm to the length of a servo lead.