Red Test Lead with Banana Plugs
€4.92excl. VAT€6.00incl. VATRed test lead fitted with banana plugs with retractable insulating shrouds
New products
All new products →
Multicolour Layered Case for Raspberry Pi 2 and 3 Model B / B+
€5.53excl. VAT€6.75incl. VAT
Read more
ESP32 – Development board with Wi-Fi, Bluetooth and USB Type-C connector
€11.48excl. VAT€14.00incl. VAT
Read more
2-Channel Programmable Signal Generator – 1 nHz to 80 MHz, 300 MSa/s Sample Rate
€278.69excl. VAT€340.00incl. VAT
Read more
All products
Narrow by category
All
Robotics › Sensors187
Enclosures143
Arduino compatible115
Raspberry Pi115
Breakout boards › Sensors112
Buttons, switches & joysticks109
Actuators100
Soldering100
Arduino94
Resistors86
Displays84
Lab cables83
LEDs83
Light bulbs78
Counts based on the first 4198 matches.
-
Lab cables -
Lab cablesBlack test lead with banana plugs – 50 cm
€4.92excl. VAT€6.00incl. VATBlack test lead fitted with banana plugs complete with retractable insulating shroud
-
Lab cablesFlat Ribbon Cable with 2 F/F 2×8-pin Connectors
€2.05excl. VAT€2.50incl. VAT20 cm flat ribbon cable fitted with a 2×8-pin female connector at each end
-
Lab cablesSet of 10 Crocodile Clip Test Leads, 5 Colours
€2.30excl. VAT€2.80incl. VATSet of 10 test leads in 5 different colours with crocodile clips
-
Lab cables50 Coloured Male/Female Jumper Wires
€7.38excl. VAT€9.00incl. VATPack of 50 jumper wires in assorted colours (5 black, 5 brown, 5 red, 5 orange, 5 yellow, 5 green, 5 blue, 5 violet, 5 grey, 5 white), 15 cm long, terminated with a 1-pole female connector at one end and a male one at the other
-
Lab cablesMale-Male Jumper Wires, Red – 10 cm
€1.64excl. VAT€2.00incl. VATPack of 10 leads, 10 cm long, terminated at both ends with a 1-way male connector
-
Lab cablesYellow Male-Male Jumper Wires – 10 cm
€1.64excl. VAT€2.00incl. VATPack of 10 leads, 10 cm long, terminated at both ends with a 1-pole male connector
-
Lab cablesMale-to-Male Jumper Wires, Blue – 10 cm
€1.64excl. VAT€2.00incl. VATPack of 10 leads, 10 cm long, terminated at both ends with a 1-way male connector
-
Lab cablesFemale-Female Jumper Leads, Black
€1.80excl. VAT€2.20incl. VATPack of 10 leads, 15 cm long, terminated at both ends with a 1-way female connector
-
Lab cablesFemale-to-Female Jumper Wires Yellow
€1.80excl. VAT€2.20incl. VATPack of 10 leads 15 cm long, terminated at both ends with a 1-way female connector
-
Lab cablesFemale-Female Jumper Leads, Blue
€1.80excl. VAT€2.20incl. VATPack of 10 leads, 15 cm long, terminated at both ends with a 1-way female connector
-
Lab cablesCable with connector for Sharp GP2XX series sensors
€1.23excl. VAT€1.50incl. VATThree-wire cable with 2 mm pitch JST connector, suitable for SHARP GP2D12, GP2D120, GP2Y0A21YK , GP2Y0A02YK sensors and the SRF01 sensor.
-
Lab cablesPack of 50 Female-to-Female Jumper Wires – Assorted Colours
€4.10excl. VAT€5.00incl. VATPack of 50 jumper wires in assorted colours, 10 cm long, fitted at each end with a 1-pole female connector
-
Lab cables14 cm Cable with Tamiya Female Connector – 4A
€1.89excl. VAT€2.30incl. VATTamiya female connector with a 14 cm tinned copper cable and PVC sheath, rated for currents up to 4A. Ideal for connecting batteries in model making, airsoft and low-voltage electronics.
-
Lab cables10 cm Cable with Tamiya Mini Male Connector
€2.87excl. VAT€3.50incl. VATCommonly used with 7.2 V sub-C battery packs, this 10 cm AWG lead carries a male connector (sometimes called Tamiya or Kyosho) shaped so that the polarity cannot be reversed, with a latch that stops it working loose, and able to carry high DC currents
-
Lab cables10 cm lead with Tamiya female mini connector
€2.87excl. VAT€3.50incl. VATCommonly used with 7.2 V sub-C battery packs, this 10 cm 18-AWG lead has a female mini connector (sometimes called a Tamiya or Kyosho) shaped so that the polarity cannot be reversed, with a catch that stops it pulling off the male connector, and it will carry high DC currents.
-
Lab cables30 cm cable with 3-pin female JST ZH connector
€2.05excl. VAT€2.50incl. VATAWG28 3-wire lead (red, black and white) with a female JST ZH connector, 1.5 mm pitch, 30 cm long
-
Lab cables10 cm Lead with Male Tamiya Connector – 25A
€2.38excl. VAT€2.90incl. VATCommonly used with 7.2 V sub-C battery packs, this 10 cm AWG lead has a male connector (sometimes called Tamiya or Kyosho) shaped so that reverse polarity is impossible, with a latch that stops it unplugging from the female connector, and able to carry high DC currents
-
Accessories3-Way Female Connector with 20 cm Leads
€1.31excl. VAT€1.60incl. VAT3-way female connector with 20 cm leads, 2.54 mm pitch, nylon 66 housing (UL94V-0), rated voltage 50 Vdc max, current 3 A max.
-
Accessories2-Pole Female Connector with 20 cm Leads
€1.23excl. VAT€1.50incl. VAT2-pole female connector with 20 cm long leads, 2.54 mm pitch, nylon 66 housing (UL94V-0), rated voltage 50 Vdc max, current 3 A max.