ToF Laser Distance Sensor with VL53L3CX
€10.25excl. VAT€12.50incl. VATBoard based on Time of Flight technology, built around the VL53L3CX infrared laser sensor
Narrow by category
All
Robotics › Sensors187
Enclosures143
Arduino compatible115
Raspberry Pi115
Breakout boards › Sensors112
Buttons, switches & joysticks109
Actuators100
Soldering100
Arduino94
Resistors86
Displays84
Lab cables83
LEDs83
Light bulbs78
Counts based on the first 4198 matches.
-
Sensors -
Buttons, switches & joysticksToggle switch guard
€2.46excl. VAT€3.00incl. VATMuch like the guards on the missile-launch switches fitted to military aircraft, it stops the switch it is fitted over from being operated by accident
-
Various lab products -
Relays & coilsToroidal core inductor 100 µH – 5A
€1.56excl. VAT€1.90incl. VATParticularly suited for suppressing electromagnetic interference, in switching power supplies, and in DC or stepper motor controls.
-
Relays & coilsToroidal Core Inductor 220 µH – 1A
€0.74excl. VAT€0.90incl. VATParticularly suited to suppressing electromagnetic interference, to switching power supply stages and to DC or stepper motor drives.
-
Relays & coilsToroidal Core Inductor 220 µH – 5A
€1.56excl. VAT€1.90incl. VATParticularly well suited to electromagnetic interference suppression and switching power supply units.
-
TransformersToroidal transformer 300VA 2x35V
€94.26excl. VAT€115.00incl. VAT300VA toroidal transformer with two 35V AC outputs, designed to deliver stable, efficient power with low electromagnetic noise.
-
TransformersToroidal Transformer 80VA 2x9V
€27.87excl. VAT€34.00incl. VATToroidal transformer to EN 60742/BS3535, delivering a secondary voltage of 2 x 9 Vac
-
Battery chargersTorpedo – Universal SEPIC Switching Power Supply
€13.11excl. VAT€16.00incl. VATTorpedo is a SEPIC switching power supply with a built-in LiPo charger
-
DC/DC convertersTorpedo2 – universal 3A switching converter
€23.77excl. VAT€29.00incl. VATTorpedo2 is the new DC-DC converter that runs from a battery or from any other source delivering 6.5 to 18 Vdc, and puts out 5 V at a full 3 amps! It has three power sources: USB, LiPo battery and external; a wide input voltage window, from 6.5 to 18 volts; output current up to a maximum of 3 amps; high efficiency, even above 85-90%; a built-in charger for single LiPo cells; changeover from battery to another source with no break in the output; a 5 volt output that stays steady as the load changes, with low ripple; the option of switching off just the output while the step-down converter and the charger keep working; the option of switching the output off automatically when power comes from the USB connector, which the specification limits to 500 mA; when a battery is fitted, the battery keeps the supply going; status LEDs showing the charge, which source is in use, whether the output is enabled and more besides.
-
Wrenches & screwdrivers -
Wrenches & screwdrivers -
Wrenches & screwdriversTORX T8 screwdriver – 132 mm
€1.31excl. VAT€1.60incl. VATScrewdriver with a TORX T8 tip, magnetised, with non-slip handle and steel shaft
-
Wrenches & screwdriversTORX T8 screwdriver – 138 mm
€2.13excl. VAT€2.60incl. VATTORX T8 precision screwdriver with ergonomic non-slip grip and CrVMo steel blade
-
Wrenches & screwdriversTORX T9 SCREWDRIVER – 138 mm
€2.13excl. VAT€2.60incl. VATTORX T9 precision screwdriver with an ergonomic non-slip handle and a CrVMo steel blade
-
Optical cablesTOSLINK Optical Cable Plug M-M – 1.5 Meters
€2.87excl. VAT€3.50incl. VATDigital audio cable for connecting devices equipped with a TOSLINK interface (OPT In, OPT Out, or SPDIF In and SPDIF Out) such as CD players, amplifiers, TVs, DVD players
-
Arduino compatibleTotem Mini Lab Experiment Platform
€91.80excl. VAT€112.00incl. VATTotem Mini Lab is a small but powerful electronics laboratory for experimenting with and learning the basics of electronics
-
Buttons, switches & joysticksTouch Keypad Board with 3 Keys and 1 Slider
€4.43excl. VAT€5.40incl. VATCapacitive touch keypad with 3 buttons and a slider
-
Buttons, switches & joysticksTouch Keypad Board, 8 Keys and 1 Slider
€8.93excl. VAT€10.90incl. VATBased on the TTP229-LSF chip, this board lets you build a small touch keypad with 8/16 buttons and a slider
-
Lighting systemsTouch module with 7 high-efficiency LUXEON LEDs
€11.48excl. VAT€14.00incl. VATHexagonal touch module based on the TTP223N-HA6 chip, with 7 high-brightness LUXEON 2835 LEDs, ideal for switching lights on and off by touch. Easy to use, it calibrates itself with no setting up needed.