4 mm banana plug – red
€1.31excl. VAT€1.60incl. VATIt clamps onto the wire with a screw terminal, with no soldering, and handles up to 20 A; the flexible body is 61 mm long.
Narrow by category
All
Robotics › Sensors187
Enclosures143
Arduino compatible115
Raspberry Pi115
Breakout boards › Sensors112
Buttons, switches & joysticks109
Actuators100
Soldering100
Arduino94
Resistors86
Displays84
Lab cables83
LEDs83
Light bulbs78
Counts based on the first 4198 matches.
-
Lab connectors -
Lab connectors4 mm Banana Plug – Yellow
€1.31excl. VAT€1.60incl. VATIt clamps onto the wire with a screw terminal, with no soldering, and carries up to 20 A; the flexible body is 61 mm long.
-
Actuators4 relay module 5 Vdc 10A (assembled)
€9.02excl. VAT€11.00incl. VATModule with 4 relays for switching the load connected to them on and off, 240V/10A (max)
-
Light bulbs4 WATT WOOD’S LAMP
€3.20excl. VAT€3.90incl. VATEmits UV rays with a wavelength between 315 and 400 nm, capable of producing a distinctive fluorescent effect (shimmering light)
-
LED modules4 x 1 watt LED module – RGBY
€18.03excl. VAT€22.00incl. VATCompact module carrying 4 Osram 1 watt LEDs (red, green, blue and yellow)
-
Displays4 x 8×8 LED Matrix Display Module with MAX7219 – Green LEDs
€7.38excl. VAT€9.00incl. VATModule made up of 4 matrix displays of 64 green 3 mm common-cathode LEDs (8×8), driven by the MAX7219 chip
-
Displays4 x 8×8 LED Matrix Display with MAX7219 – Red LEDs
€7.38excl. VAT€9.00incl. VATModule made up of 4 matrix displays of 64 red 3 mm common-cathode LEDs (8×8), driven by the MAX7219 chip
-
Battery holders4 x AA Battery Holder with Clip Terminals
€0.74excl. VAT€0.90incl. VATPlastic battery holder for four AA-size batteries
-
Battery holders4 x AA Battery Holder with Clip Terminals
€0.74excl. VAT€0.90incl. VATPlastic battery holder suitable for four AA batteries
-
Battery holders4 x AA Battery Holder with USB-A Output, Cover and Switch
€1.80excl. VAT€2.20incl. VATPlastic 4 x AA battery holder with female USB-A output, cover and on/off switch.
-
Battery holders4 x AAA battery holder with wires
€0.90excl. VAT€1.10incl. VATPlastic battery holder for four AAA cells
-
Buttons, switches & joysticks4-Axis Arcade Joystick
€11.48excl. VAT€14.00incl. VATSturdy joystick with a short handle, very similar to the one used in arcade video games such as PACMAN
-
Buttons, switches & joysticks4-Axis Arcade Joystick with Button
€19.67excl. VAT€24.00incl. VATSturdy joystick complete with button, very similar to the ones used in arcade games
-
Oscilloscopes & dataloggers4-Channel 200 MHz Laboratory Oscilloscope + 2 AWG Generators
€639.34excl. VAT€780.00incl. VATHigh-performance laboratory oscilloscope, 4 channels, 200 MHz + 2 AWG generators
-
Home automation4-Channel 433MHz Receiver for the Velbus System
€59.02excl. VAT€72.00incl. VATUsed together with the VMB4TX transmitter, this receiver module lets you control devices connected to the Velbus system remotely
-
Home automation4-channel 433MHz remote control for the Velbus system
€37.70excl. VAT€46.00incl. VAT4-channel remote control working at 433MHz with 32-bit coding, giving over 1 billion possible combinations
-
Oscilloscopes & dataloggers4-Channel 70 MHz USB PC Oscilloscope with Arbitrary Waveform Generator
€245.08excl. VAT€299.00incl. VATPC oscilloscope with arbitrary waveform generator: high-level performance, innovative design and an anodised aluminium case with excellent heat and abrasion resistance
-
Infrared4-channel IR receiver with remote control
€5.74excl. VAT€7.00incl. VATSet consisting of an IR remote control and a 4-channel momentary receiver
-
LoRa modules4-Channel LoRa Remote Control 868 MHz
€48.36excl. VAT€59.00incl. VATHalf-duplex transmitter using LoRa™ modulation, for communication over very long distances, with high immunity to interference, high sensitivity and low power consumption. The XTR-8LR-4ZN is a remote control with encrypted communication which, paired with the XTR-8LR-DEC, switches remote loads on and off, giving the user plenty of options and flexibility for the problems met in the field. Two-way communication means you always know the state of the output you have activated.
-
Infrared4-channel module for IR receiver
€3.69excl. VAT€4.50incl. VATCompact module that can learn up to 4 channels of an IR remote control, once an infrared receiver such as the IR38DM or a compatible one (not included) has been fitted. It has 4 buttons (K1, K2, K3, K4) to store the matching channel, status LEDs for power (D1) and channel storage (D2), and a 6-pin connector for power and outputs. Once the channels have been stored, pressing one of the four buttons on an IR remote control (for example code 2846-TELECIR) will light the status LED and switch the matching output from low to high level (+5 Volt)