LCD display 20×4 with green backlight
€8.03excl. VAT€9.80incl. VAT4-line, 20-character LCD display with green backlight and black alphanumeric characters
Narrow by category
All
Robotics › Sensors187
Enclosures143
Arduino compatible115
Raspberry Pi115
Breakout boards › Sensors112
Buttons, switches & joysticks109
Actuators100
Soldering100
Arduino94
Resistors86
Displays84
Lab cables83
LEDs83
Light bulbs78
Counts based on the first 4198 matches.
-
Displays -
DisplaysLCD display 8X2 with blue backlight
€3.20excl. VAT€3.90incl. VAT8×2 LCD display (8 characters – 2 lines) with blue backlight and white characters
-
DisplaysMini SmartGPU – Graphics Processor + Datalogger
€61.48excl. VAT€75.00incl. VATBuilt around an Atmel microcontroller programmed to work as a graphics processor and data logger, the Mini SMART GPU has a 1.8″ colour graphic display, a slot for micro SD/SDHC cards up to 32 GB (for storing thousands of images and text files; no particular format is required) and a simple, effective UART (Universal Asynchronous Receiver – Transmitter) serial interface
-
DisplaysMiniature Scrolling Message Display, 16 Characters
€21.31excl. VAT€26.00incl. VATMiniature board that shows messages of 16 characters on a single line of an LCD display
-
DisplaysModule with 8×8 Red LED Mini Matrix Display
€4.10excl. VAT€5.00incl. VATModule with a mini matrix display made up of 64 red 3 mm common-cathode LEDs, driven by the MAX7219 IC
-
DisplaysNEXTION NX3224T024 2.4-inch display
€40.16excl. VAT€49.00incl. VATThe NX3224T024 is a display from the NEXTION family that differs from conventional displays thanks to a built-in microcontroller, flash memory, a slot for an SD card holding your project’s firmware, a 4-pin TTL serial interface and free software (Nextion Editor) designed specifically for laying out the graphics (buttons, progress bars, images, text, etc.). It offers 4 MB of flash memory, a 2.4″ resistive touch screen, 320×240 pixel resolution and 65,536 colours.
-
DisplaysNEXTION NX3224T028 2.8-inch Display
€45.08excl. VAT€55.00incl. VATThe NX3224T028 is a display from the NEXTION family that stands apart from conventional displays thanks to its on-board microcontroller, flash memory, SD card slot for loading your project’s firmware, 4-pin TTL serial interface and free software (Nextion Editor) written specifically for laying out the graphics (buttons, progress bars, images, text, etc.). It has 4 MB of flash memory, a 2.8″ resistive touch screen, 320×240 pixel resolution and 65,536 colours.
-
DisplaysNEXTION NX4832T035 3.5 inch Display
€59.84excl. VAT€73.00incl. VATThe NX4832T035 is a NEXTION family display that differs from conventional displays thanks to an on-board microcontroller, flash memory, a card slot for the SD card holding your project firmware, a 4-pin TTL serial interface and free software (Nextion Editor) written specifically to design the graphics (buttons, progress bars, images, text, etc.). It offers 16 MB of flash memory, a 3.5″ resistive touch screen, 480×320 pixel resolution and 65,536 colours.
-
DisplaysNEXTION NX8048T070 Display – 7 inch
€146.72excl. VAT€179.00incl. VATThe NX8048T070 is a display in the NEXTION family, set apart from ordinary displays by a microcontroller, a flash memory, a slot for an SD card holding the firmware of your project, a 4 pin TTL serial interface and free software (Nextion Editor) written specifically to design the graphics (buttons, progress bars, images, text and so on). It has 16 MB of flash memory, a 7” resistive touch screen, 800×480 pixel resolution and 65,536 colours.
-
DisplaysOLED Display I2C 0.96” – VCC/GND/SCL/SDA
€6.56excl. VAT€8.00incl. VATModule with a 128×64 pixel blue OLED (Organic Light Emitting Diode) display, I²C interface, SSD1306 graphic controller, viewing angle of about 180°, pin-compatible with the Espresso Lite board and easy to interface to Arduino
-
DisplaysOLED I2C display 0.96” – GND/VCC/SCL/SDA
€9.02excl. VAT€11.00incl. VATModule with a 128×64 pixel blue OLED (Organic Light Emitting Diode) display, I²C interface, SSD1306 graphics controller, viewing angle of about 180° and ready to interface with Arduino
-
DisplaysOLED SPI Display 256×64 – White Characters
€31.97excl. VAT€39.00incl. VATModule with OLED (Organic Light Emitting Diode) display, 2.08”, 256×64 pixels, white character colour, SPI interface, SH1122 graphic controller, viewing angle approx. >160°, interfaceable with Arduino
-
DisplaysPROGRAMMABLE MESSAGE DISPLAY
€40.57excl. VAT€49.50incl. VATAdd an LCD display to your application to give it a high-tech look! Replace up to 9 indicators or lamps with a single backlit LCD display.
-
DisplaysRed 7-Segment Display – Common Anode
€0.57excl. VAT€0.70incl. VATCommon anode 7-segment red display
-
DisplaysRED CC DISPLAY 10X13
€0.98excl. VAT€1.20incl. VATRed seven-segment common-cathode display in a 10 x 13 mm package: operates from 1.6 to 2.8 V and dissipates up to 60 mW.
-
DisplaysRED COMMON-ANODE DISPLAY 10X13
€0.98excl. VAT€1.20incl. VATRed seven-segment common-anode display, 10 x 13 mm package: operates from 1.6 to 2.8 V and dissipates a maximum of 60 mW.
-
DisplaysRED COMMON-ANODE DISPLAY 13X18
€1.15excl. VAT€1.40incl. VATRed common-anode seven-segment display with 13.2 mm digit height and 2.54 mm pin pitch; operates from 1.6 to 2.8 V.
-
Displays
Red common-cathode 7-segment display
€0.57excl. VAT€0.70incl. VATCommon-cathode display with 7 red segments
-
Mood lighting & gadgetsRGB LED Matrix Controller
€77.05excl. VAT€94.00incl. VATLED Matrix is a very powerful FPGA-based development board, ideal for teaching experiments as well as professional projects
-
DisplaysSerial Controller for Graphic LCD Displays
€22.13excl. VAT€27.00incl. VATSerial controller for 160×128 pixel or 128×64 pixel graphic LCD displays