3.5″ Parallel TFT Display with ESP32-S3
€72.95excl. VAT€89.00incl. VAT3.5-inch TFT display with a capacitive touch screen, ILI9488 graphics controller, ESP32-S3 module and SD card slot.
ESP8266 / ESP32 + IoT (Internet of Things)
26 products
Narrow by category
-
ESP8266 / ESP32 -
FishinoClear Case for Fishino UNO
€4.02excl. VAT€4.90incl. VATClear protective case made of 2 mm thick plexiglass, sized to house the Fishino Uno (the version shown in the photo)
-
FishinoClear plastic case for FISHINO32
€4.02excl. VAT€4.90incl. VATClear protective case made of plexiglass (2 mm thick), designed to house the Fishino32
-
FishinoClear plastic enclosure for Fishino Mega
€4.84excl. VAT€5.90incl. VATClear protective enclosure made of plexiglass (2 mm thick), sized to house the Fishino Mega
-
Wi-Fi modulesESP-01M WiFi Module with 11 I/O and 1MB Memory
€4.10excl. VAT€5.00incl. VATESP-01M WiFi transceiver module based on the ESP8285 chip, compatible with the 802.11 b/g/n standard at 2.4 GHz. The module integrates the RF antenna and 11 GPIO pins plus one ADC pin and hardware serial.
-
Wi-Fi modulesESP-12F – Wi-Fi transceiver module – GPIO
€6.15excl. VAT€7.50incl. VATSmall Wi-Fi transceiver module based on the ESP8266 chip, compliant with the 802.11 b/g/n standard at 2.4 GHz; it has a built-in TCP/IP stack, 19.5 dBm output power, data interfaces (UART / HSPI / I2C / I2S / Ir Remote Control GPIO / PWM) and a PCB antenna
-
Wi-Fi modulesESP03 Wi-Fi Transceiver Module – GPIO
€6.56excl. VAT€8.00incl. VATSmall Wi-Fi transceiver module based on the ESP8266 chip, compliant with the 802.11 b/g/n standard at 2.4 GHz, with SPI interface, 7 GPIOs, TCP/IP stack and ceramic antenna on the PCB
-
ESP8266 / ESP32ESP32 – 32 GPIO development board with WiFi and Bluetooth
€11.89excl. VAT€14.50incl. VATBoard based on the ESP32 (ESP-WROOM-32) with Wi-Fi 802.11 b/g/n, Bluetooth and 32 GPIO.
-
ESP8266 / ESP32ESP32 – WIFI + bluetooth development board
€11.07excl. VAT€13.50incl. VATCompact Open Source development and prototyping board built around the ESP32 (ESP-WROOM-32), with 802.11 b/g/n Wi-Fi, dual-mode Bluetooth (classic and BLE) and 25 GPIO.
-
ESP8266 / ESP32ESP32 – Development board with Wi-Fi, Bluetooth and USB Type-C connector
€11.48excl. VAT€14.00incl. VATCompact open-source development and prototyping board based on the ESP32 (ESP-WROOM-32), with 802.11 b/g/n Wi-Fi, dual-mode Bluetooth (Classic and BLE) and 25 GPIOs.
-
ESP8266 / ESP32ESP32 – Mini WiFi + Bluetooth Development Board ESP-WROOM-32
€10.25excl. VAT€12.50incl. VATCompact open-source development and prototyping board based on the ESP32 (ESP-WROOM-32), integrating 802.11 b/g/n Wi-Fi, dual-mode Bluetooth (Classic and BLE) and 25 GPIO.
-
ESP8266 / ESP32ESP32 Board with Battery Charger
€13.11excl. VAT€16.00incl. VATCompact open-source development and prototyping board based on the ESP32 (ESP-WROOM-32), featuring 802.11 b/g/n Wi-Fi, dual-mode Bluetooth (classic and BLE), 26 GPIO, a charging circuit for lithium polymer batteries and a micro USB connector.
-
ESP8266 / ESP32ESP32 development board for 18 servos, with Wi-Fi and Bluetooth
€46.72excl. VAT€57.00incl. VATDevelopment board built around the ESP32 with Wi-Fi and Bluetooth, ideal for driving up to 18 servos. It runs on a battery (available separately) and carries on-board voltage regulators for a steady 5V supply. It also includes Neopixel RGB LEDs and programmable pushbuttons for custom lighting effects.
-
ESP8266 / ESP32ESP32 Module with 0.96” OLED Display
€24.18excl. VAT€29.50incl. VATThis board is a development platform built around the Espressif ESP32 chip, a 32 bit dual-core Tensilica LX6 microcontroller with a 240 MHz clock, 520 kB of internal SRAM, Wi-Fi 802.11 b/g/n, dual-mode Bluetooth (Classic and BLE) and 28 I/O pins
-
ESP8266 / ESP32ESP32-CAM Development Board: ESP32 with camera
€13.52excl. VAT€16.50incl. VATCombines Wi-Fi, Bluetooth and a 2-megapixel camera on a board programmable with the Arduino IDE, with a microSD slot.
-
ESP8266 / ESP32ESP8266 Board, Arduino Compatible
€7.38excl. VAT€9.00incl. VATBuilt around the ESP8266 Wi-Fi module and with an Arduino Uno compatible form factor, this board lets you build applications that need Wi-Fi connectivity together with the ease of use of Arduino
-
Wi-Fi modulesESP8266 Wi-Fi transceiver module
€4.10excl. VAT€5.00incl. VATSmall Wi-Fi transceiver module based on the ESP8266 chip, compliant with the 802.11 b/g/n standard at 2.4 GHz, with a serial interface and a PCB antenna
-
ESP8266 / ESP32ESPMINIMAL – Wi-Fi environmental sensor board
€11.07excl. VAT€13.50incl. VATBuilt around the ESP03 Wi-Fi module, this small, compact board (assembled and tested) measures the environmental parameters of a room, of a spot in your own home or of any other kind of building, and publishes the readings to the Cloud
-
ESP8266 / ESP32Espresso Lite V2.0: the WiFi development board for IoT devices
€13.52excl. VAT€16.50incl. VATEspresso Lite V2.0 is the first low-cost Arduino-compatible development board based on the Espressif System ESP8266 WROOM-02 WiFi module
-
FishinoFishino UNO Rev.2 – Board Based on the Arduino UNO ATmega328
€35.98excl. VAT€43.90incl. VATFishino UNO Rev.2 is a board based on the ATmega328pb with WiFi connectivity, a real time clock and a microSD card reader
Out of stock
Temporarily not available to order