Educational Shield for Arduino – Kit
€22.54excl. VAT€27.50incl. VATThis shield is designed for anyone who wants to learn to program with Arduino
Robotics & development + Development systems
371 products
Narrow by category
-
STEM -
STEMEducational Wooden Tank Kit with Rubber Tracks
€9.02excl. VAT€11.00incl. VATMade of wood and fitted with rubber tracks, this tank can drive over all sorts of surfaces. Ready to turn your free time into an adventure in building and play. Just add two batteries and the fun is guaranteed!
-
ArduinoEL shield for Arduino
€28.69excl. VAT€35.00incl. VATThe EL Shield lets Arduino drive up to 4 electroluminescent strips with an operating voltage of up to 160 Vac; in this configuration the shield can drive strips up to 15 metres long
-
Arduino compatibleELEARDUKIT1 – UNO R3 Basic Kit
€31.97excl. VAT€39.00incl. VATStarter kit built around the UNO R3 board, aimed at makers, students and hobbyists.
-
Arduino compatibleELEARDUKITMEGA – MEGA2560 Basic Kit
€40.16excl. VAT€49.00incl. VATStarter kit built around the MEGA2560 R3 board, aimed at makers, students and hobbyists.
-
ArduinoEnclosure for Arduino YUN / TURQUOISE
€8.11excl. VAT€9.90incl. VATTwo-piece injection moulded ABS enclosure that clips onto the Arduino YUN/TURQUOISE board
-
ArduinoEnclosure for Arduino Yún or Turquoise
€5.74excl. VAT€7.00incl. VATFlame-retardant ABS+PC enclosure sized to house an Arduino Yún or Turquoise board
-
Linux embeddedEnclosure for BeagleBoard-xM
€9.84excl. VAT€12.00incl. VATPlastic enclosure purpose-made and pre-drilled to house the BeagleBoard-xM
-
Raspberry PiEnclosure for Raspberry Pi B+
€12.30excl. VAT€15.00incl. VATSemi-transparent plastic enclosure made to house the Raspberry PI model B+ and the Raspberry Pi 2 type B
-
Raspberry PiEnclosure for the Raspberry Pi Camera Module
€5.57excl. VAT€6.80incl. VATThis black plastic enclosure houses the Raspberry Pi Camera Module and can be simply set down or fixed to any surface with hook-and-loop tape or a screw
-
DisplaysEPAPERHAT 2.13 inch e-Paper module 250×122
€17.21excl. VAT€21.00incl. VATEPAPERHAT is an e-Paper or Paper Ink (electrophoretic) display with a built-in graphic controller and a connector for use with Raspberry Pi 2B / 3B / 3B+ / Zero / Zero W
-
DisplaysEPAPERHAT 7.5 inch 800×480 pixel – black and white
€68.03excl. VAT€83.00incl. VAT7,5” e-Paper or Paper Ink (electrophoretic) display with black and white characters, two grey levels, and a connector for use with Raspberry Pi and Jetson Nano
-
DisplaysEPAPERUART 2.9 inch e-Paper module 296×128
€20.49excl. VAT€25.00incl. VATe-Paper or Paper Ink display (electrophoretic), active matrix TFT
-
DisplaysEPAPERUART 4.3 inch e-Paper module 800×600
€72.95excl. VAT€89.00incl. VAT4.3 inch e-Paper or Paper Ink (electrophoretic) display with a resolution of 800 (H) x 600 (V) pixels
-
Wi-Fi modulesESP-01M WiFi Module with 11 I/O and 1MB Memory
€4.10excl. VAT€5.00incl. VATESP-01M WiFi transceiver module based on the ESP8285 chip, compatible with the 802.11 b/g/n standard at 2.4 GHz. The module integrates the RF antenna and 11 GPIO pins plus one ADC pin and hardware serial.
-
Wi-Fi modulesESP-12F – Wi-Fi transceiver module – GPIO
€6.15excl. VAT€7.50incl. VATSmall Wi-Fi transceiver module based on the ESP8266 chip, compliant with the 802.11 b/g/n standard at 2.4 GHz; it has a built-in TCP/IP stack, 19.5 dBm output power, data interfaces (UART / HSPI / I2C / I2S / Ir Remote Control GPIO / PWM) and a PCB antenna
-
Wi-Fi modulesESP03 Wi-Fi Transceiver Module – GPIO
€6.56excl. VAT€8.00incl. VATSmall Wi-Fi transceiver module based on the ESP8266 chip, compliant with the 802.11 b/g/n standard at 2.4 GHz, with SPI interface, 7 GPIOs, TCP/IP stack and ceramic antenna on the PCB
-
ESP8266 / ESP32ESP32 – 32 GPIO development board with WiFi and Bluetooth
€11.89excl. VAT€14.50incl. VATBoard based on the ESP32 (ESP-WROOM-32) with Wi-Fi 802.11 b/g/n, Bluetooth and 32 GPIO.
-
ESP8266 / ESP32ESP32 – WIFI + bluetooth development board
€11.07excl. VAT€13.50incl. VATCompact Open Source development and prototyping board built around the ESP32 (ESP-WROOM-32), with 802.11 b/g/n Wi-Fi, dual-mode Bluetooth (classic and BLE) and 25 GPIO.
-
ESP8266 / ESP32ESP32 – Development board with Wi-Fi, Bluetooth and USB Type-C connector
€11.48excl. VAT€14.00incl. VATCompact open-source development and prototyping board based on the ESP32 (ESP-WROOM-32), with 802.11 b/g/n Wi-Fi, dual-mode Bluetooth (Classic and BLE) and 25 GPIOs.