LED light garland with silver hearts
€5.08excl. VAT€6.20incl. VATGarland made up of 10 silver hearts, each with a warm white LED inside
Counts based on the first 4198 matches.
Lights & decorationsGarland made up of 10 silver hearts, each with a warm white LED inside
AccessoriesFeaturing a high-quality VLSI decoder, it lets you play MP3 tracks stored on an SD or SDHC memory card (max
MicrochipCompact module fitted with a microcontroller (PIC16F630) that lets you control automated systems such as controllers, automotive devices, etc.
Mains power suppliesUltra-compact switching power supply (64×27.5×425 mm) with 5 V – 2.5 A micro USB connector output
Raspberry PiTransparent plastic enclosure specifically designed and drilled to house the Raspberry Pi B+ / 3B / 3B+ and the 3.5” monitor
Mains power suppliesSwitching power supply with a 12 VDC output voltage able to deliver a current of 1000 mA
Solar panels100-watt monocrystalline solar panel with an aluminium frame, protected by tempered glass
Various lab productsSmall-parts case with 18 compartments complete with movable dividers
Light bulbsBulb-shaped lamp with omnidirectional emission, fitted with 3 warm white LEDs
LED & strip driversThis LED power supply is designed to provide a 12Vdc output with a maximum power of 30W and a maximum current of 2.5A. It features protection against short circuits, overvoltage, overload and overheating, ensuring the safety and lifespan of your LED lighting system.
Lamps, lenses & magnifiersLens with LED illuminator and 2.5x and 45x magnification factor
RobotsRobot base made of a clear acrylic body, four gearmotors, four encoder discs (sensor not included), four 65 mm diameter wheels with soft rubber tyres 26 mm wide, a battery holder for 4 AA 1.5 V batteries, connecting wires for the gearmotors, screws, nuts and spacers.
ResistorsSet of 200 resistors, 3.9 kohm 1/4 watt 5% – carbon film.
Control electronicsFitted with a reset button, a jumper to set the Baud Rate (9600, 57600, 115200), a status LED and a power LED; lets you use the PlayStation 2 wireless (or wired) controller to remotely drive robots or other devices
AccessoriesThis connector, fitted in place of the fixed one on the G15 Cube Servo (on the side opposite the rotating part), lets it rotate when used with a “U” joint
Arduino compatibleThe UNOR3 development board is the ideal platform for electronics prototyping, robotics and your automation projects. Based on the powerful 8-bit ATmega328P, it offers a solid, versatile, ready-to-use hardware architecture. It has 14 digital input/output pins (6 of which support PWM) and 6 analog inputs for accurate sensor readings. Thanks to the built-in ATmega16U2 USB-to-serial interface, it ensures a stable connection to the PC. It can be conveniently powered via USB or an external source (7-12V DC jack).
LED modulesStrip with white COB LEDs coated in silicone rubber, built on an aluminium support for better heat dissipation
AccessoriesSet of 300 PC mounting screws, ideal for assembly and repairs. Contains M5, M3 and 6#-32 screws in various sizes, plus insulating washers.
ActuatorsModule fitted with 2 solid-state relays that lets you turn the load connected to them on and off, 240 VAC / 2 A (max)
Buttons, switches & joysticksPotentiometer joystick with spring return in the handle, a button on top, and two potentiometers for directional movement (up, down, right and left), one per axis
Open-Electronics.org is the brainchild of a world leader in hobby electronics Futura Group srl. Open-Electronics.org is devoted to support development, hacking and playing with electronics: we share exciting open projects and create amazing products!
Open-Electronics.org is not just a container of ideas: it is also a web site lead by a team of engineers and geeks who will take part in the discussions and give support.
Our mission is to become a reference Open Source hacking site with ideas and feedback aimed to enrich the community.