Gearmotor 6 Vdc – 130 rpm – Double Shaft
€2.87excl. VAT€3.50incl. VATGearmotor with a double shaft, 48:1 reduction ratio and a speed of 130 rpm (at 6 VDC)
Narrow by category
All
Robotics › Sensors187
Enclosures143
Arduino compatible115
Raspberry Pi115
Breakout boards › Sensors112
Buttons, switches & joysticks109
Actuators100
Soldering100
Arduino94
Resistors86
Displays84
Lab cables83
LEDs83
Light bulbs78
Counts based on the first 4198 matches.
-
Actuators -
MotorsDC Motor 6-12V – 3000 rpm
€2.38excl. VAT€2.90incl. VATMotor running on a supply of between 6 and 12 VDC.
-
ActuatorsMetal ball caster
€2.05excl. VAT€2.50incl. VATUsed as the third support point on robots, as a bearing in rotating bases and so on.
-
Motors3 – 6 Vdc 300 mA Motor – 15000 rpm
€1.07excl. VAT€1.30incl. VATMiniature general-purpose electric motor, 3 – 6 Vdc / 300 mA.
-
MotorsDC Motor 6-12V – 3000 rpm
€1.80excl. VAT€2.20incl. VATMotor running on a supply between 6 and 12 VDC.
-
Actuators7×16 mm DC Micro Motor – 40,000 rpm
€2.05excl. VAT€2.50incl. VATMicro motor with a rotation speed of 40,000 rpm, a 3.7 VDC supply and a current draw of 110 mA (1.54 A when stalled)
-
Actuators42×19 mm wheel for MMG series gearmotors – 1 pc
€2.87excl. VAT€3.50incl. VATIt fits onto the shaft of the MMG series micro gearmotors; the rim is toothed, so an optical encoder can count its revolutions.
-
ActuatorsGear Motor 6 Vdc – 180 rpm
€6.97excl. VAT€8.50incl. VATGear motor with a 120:1 reduction ratio, speed 180 rpm (at 6 Vdc)
-
RobotsArticulated plexiglass robotic arm with 4 degrees of freedom and rotating base
€72.95excl. VAT€89.00incl. VATKit containing everything needed to build an articulated plexiglass robotic arm with 4 degrees of freedom, a rotating base (180°), a gripper for picking up objects and 5 servos that can be driven by Arduino or other electronics
-
ActuatorsPick and place head for the “ROBOARM” robotic arm
€36.89excl. VAT€45.00incl. VATMade up of a small vacuum pump, a solenoid valve, a microswitch, cables, tubing and a suction cup, this kit gives the “ROBOARM” robotic arm (not included – see related products) a system for picking up and releasing small objects.
-
ActuatorsBrushless outrunner motor
€22.95excl. VAT€28.00incl. VAT850 KV, 187 watt outrunner motor for modelling and robotics, powered from 7.4 to 14 V with a 30 A ESC.
-
ActuatorsBall Caster
€8.11excl. VAT€9.90incl. VATThe ball caster is used as the third support point on robots. Made up of a small steel ball that rolls inside a plastic housing, it can be fitted so as to give two different heights, 25 and 35 mm
-
ActuatorsDouble Gearbox with Two Independent Motors
€14.75excl. VAT€18.00incl. VATDual gearmotor made up of two independent motors and a set of gears. The ratios available are 12.7:1 – 38.2:1 – 114.7:1 and 344.2:1. A different ratio can be fitted on each side. Two hexagonal shafts, 50 mm long and 3 mm across, come out of the DGEARBOX and carry the robot wheels
-
ActuatorsServo motor 13 kg•cm, metal gears, 180°
€9.02excl. VAT€11.00incl. VATAnalogue servo with metal gears, accessories included
-
Actuators5.5kg/cm Servo Motor, Plastic Gears, 180°
€6.56excl. VAT€8.00incl. VAT42.5 gram analogue servo with accessories included, powered from 4.8 to 6 Vdc: turns 60 degrees in 0.19 seconds.
-
ActuatorsMini servo 2.3kg/cm plastic gears 180°
€8.11excl. VAT€9.90incl. VAT17-gram analogue servo with accessories included, powered from 4.8 to 6 Vdc: it turns 60 degrees in 0.18 seconds.
-
ActuatorsMini servo 1.2 kg/cm, plastic gears, 180°
€6.15excl. VAT€7.50incl. VAT9-gram analogue servo supplied with accessories, running on 4.8 to 6 Vdc: it turns 60 degrees in 0.12 seconds.
-
ActuatorsPololu Ball Caster with 1.8 cm Metal Ball
€5.33excl. VAT€6.50incl. VATThe ball caster is used as the third support point on a robot
-
ActuatorsPololu ball caster with 1.2 cm metal ball
€3.20excl. VAT€3.90incl. VATThe ball caster is used as the third support point on robots
-
ActuatorsPololu Ball Caster with 2.54 cm Plastic Ball
€6.97excl. VAT€8.50incl. VATThe ball caster is used as the third support point on robots