GPS ANTENNA WITH MCX CONNECTOR
€9.84excl. VAT€12.00incl. VATHigh-gain active GPS antenna with magnetic base
Narrow by category
All
Robotics › Sensors187
Enclosures143
Arduino compatible115
Raspberry Pi115
Breakout boards › Sensors112
Buttons, switches & joysticks109
Actuators100
Soldering100
Arduino94
Resistors86
Displays84
Lab cables83
LEDs83
Light bulbs78
Counts based on the first 4198 matches.
-
GPS -
BreadboardsSingle-Sided Presensitized Board 160×100 mm
€4.92excl. VAT€6.00incl. VATFiberglass board, 1.6 mm thick, coated with a uniform 35-micron layer of copper and photoresist
-
Terminal blocksTERMINAL BLOCK, 6 POSITIONS – 15A 600VAC
€1.23excl. VAT€1.50incl. VAT6-position, dual-row barrier terminal block, screw clamping, with clear protective cover
-
Control electronicsBreakout Board for RGB Rotary Encoder
€3.52excl. VAT€4.30incl. VATBrings out the contacts of the RGB LED rotary encoder onto pads that are easy to wire; measures just 28 x 15 mm.
-
EnclosuresAluminum Enclosure – 92x38x31 mm
€6.15excl. VAT€7.50incl. VATLightweight, corrosion-resistant aluminum enclosure, 2 mm thick, with rounded corners and stainless steel screws.
-
Mains power suppliesRaspberry Pi 27W USB-C Power Supply
€19.67excl. VAT€24.00incl. VATOfficial power supply for Raspberry Pi 5 with 27W output and a Type-C connector. It delivers optimal performance for powering Raspberry Pi 5 and high-power-consumption peripherals.
-
Actuators12V Gear Motor – 250 rpm
€7.95excl. VAT€9.70incl. VATHigh-quality DC gear motor with a 21:1 reduction ratio. Ideal for applications requiring increased torque and reduced speed.
-
Bench power suppliesDigital Bench Power Supply 0–36 V / 0–8 A with 2.8″ Color Display
€188.52excl. VAT€230.00incl. VATDigital AC-DC bench power supply, adjustable from 0 to 36V and 0 to 8A (285W), with a 2.8″ color display, ultra-low ripple (≤10mV), 8 built-in protections and USB-C/USB-A fast-charging support. Controllable via PC software, it is perfect for laboratories, electronic testing and professional applications.
-
BNC -
EnclosuresTEKO CAB022 Plastic Enclosure 129x134x61
€13.93excl. VAT€17.00incl. VATABS enclosure with matte surfaces, fitted with two 1mm-thick aluminum front panels. Inside there are guides and mounting points for PCBs
-
Jack connectors6.35 mm MONO JACK ADAPTER, FEMALE/FEMALE
€3.69excl. VAT€4.50incl. VATMetal female/female adapter for 6.35 mm mono jack.
-
SCART cablesFLAT VIDEO CABLE – SCART M / SCART M – 5 M
€14.34excl. VAT€17.50incl. VATFlat video cable, SCART male / SCART male
-
Component setsSet of 200 O-Ring Gaskets, Various Diameters
€4.51excl. VAT€5.50incl. VATSet of 200 O-ring gaskets in 15 different diameters, in a handy clear plastic case with dividers
-
Lab connectorsBlack Crocodile/Banana Connector
€0.66excl. VAT€0.80incl. VATA simple yet indispensable accessory for anyone working in electronics, whether professionally or as a hobbyist. Thanks to its technical features and ease of use, this connector is an excellent choice for any electronic project.
-
Controllers & driversSingle-Color LED Strip Dimmer
€3.28excl. VAT€4.00incl. VATDimmer for single-color LED strips, LED lamps and LED tubes, with 12 to 24 VDC power supply and maximum current of 8 A
-
Bench power suppliesBench Power Supply 13.8 Vdc – 3 A
€56.56excl. VAT€69.00incl. VATLinear bench power supply with a single 13.8 Vdc output, capable of delivering a maximum current of 3 A
-
CNC accessoriesUniversal CNC Controller
€72.95excl. VAT€89.00incl. VATController with all the hardware and software features needed to drive small three-axis CNC (Computer Numerical Control) machines.
-
micro:bitBreakout Board for Micro:bit
€9.84excl. VAT€12.00incl. VATThis breakout board, with a connector for Micro:bit, brings out all 21 GPIO pins and the power supply of the Micro:bit onto a 2.54 mm pitch pin header.
-
Electronic components12 Vdc Peristaltic Pump
€12.30excl. VAT€15.00incl. VATPeristaltic pump with DC motor and silicone tubing
-
SensorsCCS811 Air Quality Module
€22.95excl. VAT€28.00incl. VATCompact breakout board based on AMS’s CCS811 air-quality sensor.