12V Lead-Acid Battery Charger – 1A
€15.57excl. VAT€19.00incl. VATCharger for 12V lead-acid batteries, with protection against overcurrent and reverse polarity. Supplied with crocodile clips and a removable output plug for flexible use.
23 products
Battery chargersCharger for 12V lead-acid batteries, with protection against overcurrent and reverse polarity. Supplied with crocodile clips and a removable output plug for flexible use.
Battery chargersSmall module for charging single-cell lithium-ion batteries
Battery chargersSmall module for charging single-cell lithium-ion batteries
Battery chargersBuilt around the TP4056A and DW01A chips and the FS8205A dual N-channel MOSFET, this small module is ideal for charging single-cell lithium-ion batteries
Battery protectionProtection module for 7.4V – 4A lithium-ion battery packs, designed to keep lithium batteries in a 2S configuration safe and efficiently managed.
It provides overcharge, over-discharge, over-current and short-circuit protection, for long life and reliable performance of the battery pack.
Battery chargersFast-charging module for lithium-ion batteries: 3A, 4.5-5.5V.
Battery chargersMPPT solar charge controller with a built-in USB socket, to charge lithium-ion batteries straight from a solar panel or over USB. It has short-circuit protection, an LED battery charge indicator and a JST or PH2.0 connector interface. Compact and easy to fit, it is an effective way to run battery-powered devices on solar energy.
Battery chargersAutomatic switching charger for 12V and 24V WET-AGM-GEL-VRLA lead-acid batteries and for 12V LiFePO4 batteries
Battery chargersSmart charger for 12V lead-acid batteries, ideal for cars, motorcycles, boats and vehicles with AGM, GEL, SLA, EFB and WET batteries. Automatic charging, float maintenance and a repair mode for damaged or flat batteries.
Battery chargersCharges packs of three lithium cells in series, 18650 or 18500 type: universal 100-240 Vac input, 180 cm cable, protected against short circuit and overload.
Battery chargersThere are plenty of battery chargers on the market, but few of them are universal
Battery chargersSmart microprocessor-controlled charger, fitted with a backlit LCD display and able to charge 4 AA or AAA Ni-MH batteries
Battery chargersBuilt around Microchip’s MCP73844-840I/MS, this charger can recharge two 3.7V Li-Ion/LiPo cells in series
Battery chargersCharge your batteries quickly with this lithium battery charger. Compatible with several battery types such as 18650, 26650, 14500, 16340 and 18500. Charging current up to 2 A and LED indicators to keep an eye on the charge status.
Mobile phone accessoriesPower bank module fitted with dual USB output, 5V-2A and 5V-1A
Battery chargersBased on the CN3791 chip and fitted with two status LEDs, this compact charger with MPPT (Maximum Power Point Tracking) technology lets you charge a 3.7-volt lithium polymer battery using a small solar panel with a 6-volt output
Battery chargersThis shield offers 3V/1A and 5V/2.2A outputs, with high efficiency and room for up to two 18650 lithium batteries.
Battery protectionProtection module for 3.7V – 5A Lithium-Ion battery packs, designed to ensure safety and efficient management of lithium batteries in 1S configuration. It features protection against overcharge, over-discharge, overcurrent and short circuit, ensuring long life and reliable performance for battery packs.
Battery chargersBased on the CN3065 chip, this compact charger with MPPT (Maximum Power Point Tracking) technology charges a single-cell 3.7 volt lithium polymer/Li-ion battery from a small solar panel with a 5 volt output (Max
Battery chargersTorpedo is a SEPIC switching power supply with a built-in LiPo charger
Open-Electronics.org is the brainchild of a world leader in hobby electronics Futura Group srl. Open-Electronics.org is devoted to support development, hacking and playing with electronics: we share exciting open projects and create amazing products!
Open-Electronics.org is not just a container of ideas: it is also a web site lead by a team of engineers and geeks who will take part in the discussions and give support.
Our mission is to become a reference Open Source hacking site with ideas and feedback aimed to enrich the community.