10 A Motor Shield for Arduino
€16.39excl. VAT€20.00incl. VATArduino shield based on an H-bridge made up of 4 NMOS transistors which, besides providing better efficiency, remove the need for a heatsink
Arduino + Arduino compatible
58 products
Narrow by category
-
Arduino -
Arduino16-Output I/O Expansion Board for Arduino
€11.48excl. VAT€14.00incl. VAT16-output I/O expansion board based on Microchip’s MCP23017 IC, able to communicate with Arduino via the I2C bus using dedicated libraries
-
Control electronics2 DC Motor / 1 Stepper Motor Driver Shield – 10 A
€26.23excl. VAT€32.00incl. VATArduino shield based on an H-bridge made up of 8 NMOS transistors which, besides improving efficiency, remove the need for a heatsink
-
Arduino2-Channel DC Motor Speed Control Shield
€11.48excl. VAT€14.00incl. VATArduino shield based on the L298P dual full-bridge driver, able to drive 2 DC motors (or one stepper motor) with a supply voltage between 4.8 and 24 VDC and a current of up to 2 A (2.5 A peak)
-
Arduino2.4” touch display shield for Arduino
€11.89excl. VAT€14.50incl. VATTouch display shield for Arduino built around a 2.4″ resistive TFT LCD display, ILI9341 graphic controller, 320×240 pixel resolution, 260,000 colours, SD card slot and SPI interface
-
Arduino433 MHz LoRa Shield for Arduino/Fishino – Assembled
€25.41excl. VAT€31.00incl. VATBuilt around the 433 MHz RFM98W transceiver module, this shield for Arduino, Fishino and compatible boards (not included – see related products) handles long-range bidirectional data transmission using the LoRa™ technology
-
ArduinoArduino I/O expander shield
Price range: €34.00 through €52.00 incl. VATI/O expander shield for Arduino based on the Microchip MCP23017 chip
-
ArduinoArduino shield for RC servo control
€24.18excl. VAT€29.50incl. VATShield for Arduino/Fishino UNO that drives up to six RC servos, both traditional 3-pin ones (+5V / – / PWM ) and 4-pin servos with feedback (+5V / – / PWM / Feedback )
-
ArduinoArduino TFT touch screen shield 2.8”
€22.95excl. VAT€28.00incl. VATArduino shield made up of a 2.8″ TFT LCD display with resistive touch screen, ST7789V graphics controller, 320×240 pixel resolution, 262,000 colors, white LED backlight, SD card slot and SPI interface
-
DisplaysArduino TFT Touch Screen Shield 3.5”
€26.23excl. VAT€32.00incl. VATShield for Arduino Uno built around a 3.5″ TFT LCD display with resistive touch screen, ILI9486 graphics controller, 480×320 pixel resolution, 65,000 colours, white LED backlight, SD card slot and SPI interface
-
ArduinoArduino video overlay shield – kit
€15.57excl. VAT€19.00incl. VATArduino shield based on the LM1881 chip (from National Semiconductors) that overlays text on the composite video signal (PAL and NTSC)
-
MicrocontrollersATMega328 Microcontroller with BOOTLOADER for Arduino UNO
€9.67excl. VAT€11.80incl. VATAtmel ATMega328 8 bit microcontroller with Bootloader for Arduino UNO
-
ArduinoAudio Shield for Arduino – Solder-Yourself Kit
€15.98excl. VAT€19.50incl. VATBased on the ISD1760PY chip, this shield for Arduino (Duemilanove, UNO or Mega) records and plays back up to 60 seconds of music and speech
-
ArduinoBattery Shield for Arduino – Solder-it-yourself Kit
€15.98excl. VAT€19.50incl. VATShield for the Arduino Uno, arranged to take the supply voltage of a battery on its input (through a terminal block, between 5 and 12 volts) and, using a particular feature of the PCF8593T chip (a clock/calendar normally employed as a clock and calendar), to switch the system on at fixed intervals chosen from software according to the conditions it finds
-
ArduinoBlack enclosure for Arduino Uno
€4.92excl. VAT€6.00incl. VATBlack ABS enclosure made specifically to house an Arduino UNO board, leaving the reset button accessible and allowing shields to be fitted
-
Bluetooth modulesBluetooth module BM-S02, X-BEE form factor (assembled)
€15.57excl. VAT€19.00incl. VATBreakout board compatible with the XBee format and fitted with the Texas Instruments CC2540 Bluetooth 4.0 (Low Energy) module
-
ArduinoBox of 37 sensors for Arduino/Raspberry Pi/robotics
€24.51excl. VAT€29.90incl. VATPack containing 37 sensors for use with the main development platforms
-
Bluetooth modulesCC2541 Bluetooth module, XBee form factor (assembled)
€12.30excl. VAT€15.00incl. VATBreakout board in XBee form factor carrying the Texas Instruments CC2541 Bluetooth 4.0 (Low Energy) module
-
ArduinoClear Enclosure for Arduino Mega
€4.84excl. VAT€5.90incl. VATClear protective enclosure in tough acrylic plastic, sized to house an Arduino Mega R3.
-
ArduinoCLEAR ENCLOSURE FOR ARDUINO UNO
€3.20excl. VAT€3.90incl. VATClear protective enclosure in tough acrylic plastic, sized to house the Arduino Uno R3.