177 products
Function generatorsHigh-performance 4-in-1 oscilloscope with 350MHz bandwidth, 1GSa/s, signal generator, spectrum analyzer and frequency response analysis.
Compact, touchscreen and packed with advanced functions, it is perfect for professional testing, diagnostics and analysis.
Special test instrumentsPortable instrument for checking water quality
Special test instrumentsMeasures distances with two millimetres of error and calculates areas, volumes and indirect measurements, storing up to 99 readings in memory.
Function generatorsSimple square wave signal generator from 1 Hz to 200 kHz based on the 555 chip
Special test instrumentsCompact 8-channel logic analyzer for testing and analysing digital circuits; it plugs into the PC’s USB port so the captured data can be studied in detail. Maximum sampling rate 24 MHz. It supports 10 different communication standards: CAN, DMX-512, I²C, I2S/PCM, Manchester, 1-Wire, Async Serial, Simple Parallel, SPI, UNI/O. Fully compatible with the Saleae Logic software.
Multimeters & accessoriesTrue RMS digital clamp meter with colour display, measuring current up to 600A and voltage up to 750V. Supports waveform mode, NCV, temperature, capacitance and much more. Intuitive interface, rechargeable battery and advanced functions in a single compact, powerful instrument.
Multimeters & accessoriesThe set contains 2 test probes, 2 leads 90 cm long (red and black), 4 crocodile clips, 2 fork terminals, 4 tips 4 mm in diameter and 2 tips 2 mm in diameter.
Function generatorsModule based on the Analog Devices ADF4351 integrated circuit, a wideband frequency synthesiser made up of a PLL (Phase-Locked Loop) and a VCO (Voltage-Controlled Oscillator). Besides the Analog Devices generator IC, the module carries its power stage built around LDO regulators, the loop filter, the 25 MHz active crystal oscillator used as the reference source and, lastly, the SPI serial interface and the power-on and lock-detect LEDs
Multimeters & accessoriesAnalogue multimeter (CE/CAT II 1000V, CAT III 500V) able to measure DC currents up to 10 A, DC and AC voltages up to 1000 V, resistances up to 20 Mohm, diodes, transistors and electrical continuity
Panel metersAnalogue panel ammeter with 100 mA DC full-scale reading, size (mm): 64x56x57.
Panel metersAnalogue panel ammeter, full scale: 50 mA DC, dimensions: 64x56x57 mm.
Panel metersAnalogue panel ammeter with full-scale range: 3 A direct current, screw for zero adjustment, dimensions: 71 x 60.5 mm
Panel metersAnalogue panel ammeter, 5 A AC full scale, zero-adjust screw, 70 x 60 mm
Panel metersAnalogue panel ammeter with a full-scale range of 15 A DC, dimensions: 70 x 60 mm.
Panel metersAnalogue panel voltmeter with 30 Vdc full-scale reading, size: 60 x 47 mm.
Panel metersTechnical specifications: full-scale range: 30 Vdc, zero adjustment screw, dimensions: 70 x 60 mm
Special test instrumentsThis smart tester is designed to detect the polarity of the 220 VAC outlet and the efficiency of the residual current circuit breaker (RCD)
Function generatorsTwo-channel DDS generator: waveforms, pulses, functions, harmonics, frequency counter. 4.3″ LCD display, 300 MSa/s sampling, 25 MHz sine.
Special test instrumentsFitted with an LCD display, the Peak DCA55 can analyse a wide range of electronic components such as bipolar transistors, MOSFETs, SCRs, triacs, diodes, diode arrays, FET junctions (only the pin identified as the gate), LEDs, bicolour LEDs and RGB LEDs
Special test instrumentsThe Peak Atlas DCA Pro (DCA75) is an advanced semiconductor analyzer, able to automatically identify and test transistors, JFETs, diodes, LEDs, Triacs and much more. It features a graphic LCD display, USB communication and PC software for detailed component analysis.
Open-Electronics.org is the brainchild of a world leader in hobby electronics Futura Group srl. Open-Electronics.org is devoted to support development, hacking and playing with electronics: we share exciting open projects and create amazing products!
Open-Electronics.org is not just a container of ideas: it is also a web site lead by a team of engineers and geeks who will take part in the discussions and give support.
Our mission is to become a reference Open Source hacking site with ideas and feedback aimed to enrich the community.
