Blue PLA on a spool for 3D printers – 1 kg – 3 mm
€22.13excl. VAT€27.00incl. VAT1 kg spool of blue PLA, 3 mm diameter.
3D printing
88 products
Narrow by category
All
3D printing › Accessories49
Filaments30
3D printing › Control electronics7
Lab cables3
3D printers2
Robotics › Accessories2
Actuators2
Robotics › Control electronics2
Motors2
Buttons, switches & joysticks1
CNC accessories1
Cooling & heating1
Lab connectors1
LDRs, thermistors & varistors1
-
Filaments -
AccessoriesBrass heater block for 3D Vertex
€11.07excl. VAT€13.50incl. VATBrass heater block for the 3D Vertex
-
AccessoriesBrass Nozzle with 0.3 mm Hole for 3D4040 Printer
€2.46excl. VAT€3.00incl. VATBrass nozzle with a 0.3 mm extrusion hole diameter, suitable for the print head of the 3D4040 printer.
-
Accessories
Brass Nozzle with 0.4 mm Bore for 3D4040 Printer
€2.46excl. VAT€3.00incl. VATBrass nozzle with a 0.4 mm extrusion bore, suitable for the print head of the 3D4040 printer.
-
AccessoriesBrass Nozzle with 0.5 mm Bore
€8.11excl. VAT€9.90incl. VATBrass nozzle with a 0.5 mm extrusion bore, for the hot end of the 3Drag V1.0, V1.1 and V1.2 printers.
-
AccessoriesBrass nozzle with 0.5 mm bore for 3D4040 printer
€2.46excl. VAT€3.00incl. VATBrass nozzle with a 0.5 mm extrusion bore, suitable for the print head of the 3D4040 printer.
-
Accessories
Brass Nozzle with 0.8 mm Bore
€8.11excl. VAT€9.90incl. VATBrass nozzle with a 0.8 mm extrusion bore, suitable for the hot end of the 3Drag V1.0, V1.1 and V1.2 printers.
-
AccessoriesBrass Nozzle with 0.8 mm Bore for 3D4040 Printer
€2.46excl. VAT€3.00incl. VATBrass nozzle with a 0.8 mm extrusion bore, suitable for the print head of the 3D4040 printer.
-
AccessoriesBuildTak for DMAKE printer
€9.84excl. VAT€12.00incl. VATBuildTak is a thin adhesive plastic sheet that provides an ideal print surface and makes the object stick without using a heated bed
-
Control electronicsCarrier board for DRV8825 and 3DDRIVER
€3.28excl. VAT€4.00incl. VATThis small board was designed specifically to simplify the use of stepper motor driver modules such as the A4988, DRV8825, 3DDRIVER or others with the same pinout
-
FilamentsColour-Change PLA, Grey to White – 3 mm – 1 kg
€5.74excl. VAT€7.00incl. VATAn unusual PLA filament: grey below 31°C, it turns white above 31°C
-
FilamentsColouring granules for neutral ABS pellets
€15.57excl. VAT€19.00incl. VATPlastic pack with 6 compartments holding 120 grams of granules in 6 colours
-
3D printersCreality Ender-3 V3 SE 3D Printer – 22x22x25 cm
€228.69excl. VAT€279.00incl. VATCreality Ender-3 V3 SE FDM 3D printer with automatic bed levelling, a 22x22x25 cm build volume and a colour display. This printer can handle a range of materials including PLA, PETG, ABS and TPU.
-
AccessoriesDMAKE STANDALONE PRINTING CONTROLLER WITH DISPLAY
€12.30excl. VAT€15.00incl. VATFitted with a rotary encoder, a backlit 4-line by 20-character display with white text on a blue background, an SD card slot and a reset button, this board lets you drive the Delta 3D printer and print without a computer: just slide an SD card (not included) holding the G-code file into its slot. It gives you real-time control over temperature, acceleration, speed, flow rate, preheating and many other functions
-
AccessoriesExtruder Body Set for the 3DRAG Printer
€39.34excl. VAT€48.00incl. VATComplete replacement for the 3DRAG extruder: Delrin shells, 43-tooth gear wheel, bearings, spring and fixing hardware.
-
Control electronicsFilament runout switch module for 3D printers – 3 mm filament
€7.38excl. VAT€9.00incl. VATMade up of a microswitch and a status LED, this small module is meant to be used as a filament runout detector on 3D printers, wherever the printer’s electronics allow it to be wired in
-
AccessoriesFlexible Heating Pad for 3DCHOCO, 5×10 cm
€7.79excl. VAT€9.50incl. VATFlexible heating pad made from a mesh of polyester filaments and micro conductive metal fibres protected by a polyimide film
-
FilamentsFluorescent orange PLA 3 mm – 1 kg
€15.57excl. VAT€19.00incl. VATFluorescent orange PLA on a spool for 3D printers
-
FilamentsFluorescent Red PLA 3 mm – 1 kg
€15.57excl. VAT€19.00incl. VATFluorescent red PLA on a spool for 3D printers
-
FilamentsFluorescent Yellow PLA Filament 3 mm – 1 kg
€15.57excl. VAT€19.00incl. VATFluorescent yellow PLA on a spool for 3D printers