MINIATURE MOTION SWITCH
€12.21excl. VAT€14.90incl. VATCloses the contact when it is shaken or tilted: just 4.7 x 5.2 mm, switches 20 mA up to 24 Vac.
Robotics & development
784 products
Narrow by category
-
Sensors -
SensorsMiniature PIR Module
€4.51excl. VAT€5.50incl. VATMiniature PIR sensor with control board and output for interfacing with a microcontroller, Arduino, etc. (high level 3.3V – low level 0V)
-
ActuatorsMiniature vibration motor
€5.74excl. VAT€7.00incl. VATExtremely small vibration motor, ideal for every application where an audible buzzer cannot be used
-
Arduino compatibleMiniduino – Mini Arduino Pen Drive with Battery Charger
€18.03excl. VAT€22.00incl. VATMiniduino is a tiny (19x40x3.5 mm excluding the pin strips and the USB connector) Arduino board with minimal hardware but access to all the I/O just like the Nano, and with a direct-plug USB connector built into the PCB: an Arduino pen drive, in effect.
-
SensorsML8511 UVB Sensor Breakout Board
€19.67excl. VAT€24.00incl. VATSmall breakout board based on the ML8511 ultraviolet light sensor. It measures the intensity of the UV rays from sunlight, lamps or other sources, with a wavelength between 280 nm and 390 nm
-
ActuatorsModule with 2 solid-state relays
€6.15excl. VAT€7.50incl. VATModule fitted with 2 solid-state relays that lets you turn the load connected to them on and off, 240 VAC / 2 A (max)
-
SensorsModule with 8 reflective sensors
€8.11excl. VAT€9.90incl. VATModule with 8 reflective sensors, each made up of an infrared emitting diode and a phototransistor
-
SensorsModule with DHT22 Temperature and Humidity Sensor
€7.30excl. VAT€8.90incl. VATCompact module based on the DHT22 temperature and relative humidity sensor. It features a single-wire serial interface that makes it easy to use
-
SensorsMotion sensor board with mercury switch
€3.69excl. VAT€4.50incl. VATMotion sensor using a mercury switch
-
MotorsMotor 3 Vdc 300 mA – 14200 rpm
€1.23excl. VAT€1.50incl. VATMiniature electric motor 3 Vdc / 300 mA for general-purpose use.
-
MotorsMotor 6 Vdc 250 mA – 14500 rpm
€3.28excl. VAT€4.00incl. VATMiniature electric motor, 6 Vdc / 250 mA, for general-purpose use.
-
Arduino compatibleMotor and propeller control shield for Arduino – L9110
€4.67excl. VAT€5.70incl. VATVersatile motor control shield, compatible with Arduino UNO R3, R4 and MEGA. Thanks to the L9110 chip it controls both speed and direction of rotation, which makes it ideal for prototyping and robotics projects. Sample code is included to make it easy to get going.
-
Arduino compatibleMotor Control Shield for Arduino with LM293D
€4.51excl. VAT€5.50incl. VATThe Motor Shield with LM293D is a board for Arduino that drives up to 4 DC motors independently. It handles voltages up to 36V and currents up to 600mA per channel. It carries two L293D drivers and a 74HC595 shift register, cutting the Arduino pins needed for motor direction down to just 3. Suitable for all sorts of projects, from robotics to automation
-
ArduinoMotor Shield for Arduino – Assembled
€30.33excl. VAT€37.00incl. VATShield for Arduino built around the L298P dual full-bridge driver, able to drive DC motors as well as stepper motors
-
AccessoriesMOUNTING BRACKET FOR EMG30 GEARED MOTOR
€4.92excl. VAT€6.00incl. VATMounting bracket for fitting the EMG30 geared motor to your robot
-
AccessoriesMounting Bracket for Standard RC Servo
€3.20excl. VAT€3.90incl. VATPlastic mounting bracket made specifically for use with standard-size servos (max. width
-
ArduinoMounting Plate for Arduino and Breadboard
€6.48excl. VAT€7.90incl. VATHolds an Arduino board and a breadboard (type 7300-BB400 – 82 x 55 mm) side by side on the same work surface
-
SensorsMPR121 – Capacitive Touch Sensor Breakout
€4.02excl. VAT€4.90incl. VATSmall breakout board based on the Freescale MPR121QR2 chip, a capacitive touch sensor controlled over an I²C interface
-
SensorsMQ-5 LPG gas sensor board
€3.69excl. VAT€4.50incl. VATBoard with an MQ-5 LPG gas sensor that detects LPG, natural gas and town gas in the air at concentrations between 200 and 10,000 ppm.
-
SensorsMQ-7 Gas Sensor Board
€5.57excl. VAT€6.80incl. VATDetects carbon monoxide between 20 and 2,000 ppm, with analogue and digital outputs and a threshold trimmer; 2.5 to 5 Vdc supply.