784 products
ArduinoBased on the RFM95W transceiver module at 868 MHz, this shield for Arduino, Fishino and compatible boards (not included – see related products) provides long-range bidirectional data transmission using LoRa™ technology
SensorsSensor able to detect the presence of LPG (Liquefied Petroleum Gas) in the air at concentrations between 300 and 10,000 ppm
SensorsSensor able to detect LPG, natural gas and town gas in the air at concentrations between 200 and 10,000 ppm
Raspberry PiPCIe-to-M.2 adapter board for Raspberry Pi 5, designed to connect high-speed NVMe SSDs through the PCIe interface.
ESP8266 / ESP32Maduino Zero ESP is an IoT (Internet of Things) solution based on the Atmel 32-bit SAMD21 microcontroller and on the ESP-12S Wi-Fi module built around the ESP8266 SoC (System on Chip). It complies with the 802.11 b/g/n standard at 2.4 GHz and features an integrated TCP/IP stack, 19.5 dBm output power, data interfaces (UART / HSPI / I2C / I2S / Ir Remote Control GPIO / PWM) and an on-board PCB antenna
Arduino compatibleMaduino Zero HM-13 is an IoT (Internet of Things) solution built around Atmel’s 32-bit SAMD21 microcontroller and the HM-13 Bluetooth module. Programmable via the Arduino IDE, it features a data interface (UART / I2C / SPI), an on-PCB antenna, two pin headers exposing the SAMD21 microcontroller’s pins, a micro SD card slot, a micro USB connector for power and PC communication, a 3.7-volt input for connecting a lithium-polymer battery, a 5-volt input for connecting a solar panel to recharge the lithium-polymer battery, two status LEDs (for power and battery charging), and a reset button for the SAMD21 microcontroller. Dimensions (mm): 55×40.3×9, weight: 13 grams.
SensorsBased on the Freescale MAG31110 chip, this compact board measures magnetic fields
Control electronicsMaker Drive is a driver for 2 DC motors or 1 stepper motor, specifically designed to make it easier for makers, students, and hobbyists with little basic electronics knowledge, or who simply want to start controlling motors right away
Arduino compatibleMaker UNO is a development board compatible with the Arduino UNO R3, an alternative and improved solution. Based on the ATmega328P, it has 12 LEDs (pin 2 to pin 13), 1 piezo buzzer (pin 8), 1 on/off switch for the buzzer and 1 programmable button (pin 2).
Arduino compatibleMaker UNO Plus is a development board compatible with the Arduino UNO R3, an alternative and improved solution. Based on the ATmega328P, it has 12 LEDs (from pin 2 to pin 13), 1 piezo buzzer (pin 8), 1 on/off switch for the buzzer, 1 programmable pushbutton (pin 2) and a micro USB connector. The current available for devices running at 3.3 V is a full 500 mA, against the 50 mA of the Arduino Uno. The USB-to-serial converter has been upgraded from the CH340 chip to the FT231X.
micro:bitSmall wheeled robot based on micro:bit (not included).
micro:bitSmall wheeled robot based on micro:bit (not included).
SensorsSmall I2C module based on the MAX30100 pulse oximetry sensor, able to measure non-invasively the amount of bound haemoglobin in the blood and the heart rate. It is made up of two LEDs (one red at 660 nm and one infrared at 880 nm) and a photodiode that picks up the light reflected by the tissue to work out the percentage of haemoglobin saturated with oxygen.
SensorsSmall I2C module based on the MAX30102 pulse oximetry sensor, able to measure the amount of bound haemoglobin in the blood and the heart rate without breaking the skin
SensorsSet made up of a module based on the Maxim MAX6675 chip and a type “K” thermocouple with a temperature range from 0°C to +600°C. The MAX6675 digital converter provides a digital serial interface compatible with Arduino, Fishino or other microcontrollers
mbed modulesMBED is a board based on the 32-bit ARM® Cortex™ NXP LPC11U24 microcontroller, designed specifically for low-cost prototyping of USB devices and battery-powered applications
mbed modulesMBED is a board based on the 32-bit ARM® Cortex™ NXP LPC1768 microcontroller running at 96 MHz
SensorsMicrochip temperature sensor that requires no calibration and has an accuracy of ±2°C over the -40 to +125°C range (±1°C over the 0 to 70°C range)
Control electronicsFitted with a white LED and a photoresistor, Me Light Sensor is a module from the Makeblock Me series, designed to be simple to program and easy to connect
Control electronicsPaired with an Arduino Uno Rev3, this shield lets you use every Makeblock module with an RJ25 (6P6C) interface
Open-Electronics.org is the brainchild of a world leader in hobby electronics Futura Group srl. Open-Electronics.org is devoted to support development, hacking and playing with electronics: we share exciting open projects and create amazing products!
Open-Electronics.org is not just a container of ideas: it is also a web site lead by a team of engineers and geeks who will take part in the discussions and give support.
Our mission is to become a reference Open Source hacking site with ideas and feedback aimed to enrich the community.
