Switching Power Supply 5 VDC / 3 A with TYPE-C Output
€8.61excl. VAT€10.50incl. VATSwitching power supply with a 5 VDC – 3 A output and a lead with a Type C connector
Robotics & development
784 products
Narrow by category
-
Mains power supplies -
Arduino compatibleTACTIGONBASIC – Multi-Sensor Bluetooth Board
€72.95excl. VAT€89.00incl. VATThe Tactigon is a small board (46.9×15.2×5.5 mm) run by a 32 bit ST microcontroller, with a BLE transceiver, temperature and pressure sensors, a 9 axis IMU, an RGB LED, a charge controller for the Li-ion battery it runs on, and 5 GPIO.
-
SensorsTCS230 Colour Sensor
€11.07excl. VAT€13.50incl. VATModule with 4 white LEDs, based on the TAOS TCS230 chip, a light-to-frequency colour converter
-
SensorsTCS3200 colour sensor board
€13.03excl. VAT€15.90incl. VATModule with 4 white LEDs, built around the TAOS TCS3200 chip, a light-to-frequency colour converter
-
Sensors -
SensorsTEMT6000 Ambient Light Sensor
€2.21excl. VAT€2.70incl. VATSmall visible-spectrum sensor built around an NPN phototransistor
-
SensorsTEMT6000 Ambient Light Sensor with Strip
€2.05excl. VAT€2.50incl. VATThis module uses the TEMT6000 light sensor for ambient light detection. With peak sensitivity at 570 nanometres and a wide 60-degree acceptance angle, the sensor measures the amount of visible light, excluding the infrared (IR) spectrum.
-
SensorsThree-axis digital compass module with QMC5883L chip
€4.75excl. VAT€5.80incl. VATElectronic compass module with a three-axis magnetic field sensor, based on the QMC5883L chip. It is the ideal solution for projects that need accurate heading and orientation sensing.
-
SensorsTMP102 temperature sensor
€10.25excl. VAT€12.50incl. VATBreakout board built around the tiny TMP102 digital temperature sensor
-
SensorsTMP36 Analogue Temperature Sensor
€3.11excl. VAT€3.80incl. VAT3-pin analogue temperature sensor (TO-92 case) that reads temperatures between -40°C and +125°C
-
RobotsTobbie – Interactive 6-Legged Robot with Sensors
€36.89excl. VAT€45.00incl. VATTobbie is a 6-legged robot kit that can interact with its surroundings
-
micro:bitTobbie 2 Robot with micro:bit V2- Kit
€75.41excl. VAT€92.00incl. VATTobbie II is a robot you build yourself (kit form), with 6 legs and a body free to rotate, carrying all the electronics it needs, including a motor, an infrared sensor and a buzzer to make it lively and interactive for maximum fun
-
SensorsTOF (Time Of Flight) Module with VL53L0X Sensor
€13.52excl. VAT€16.50incl. VATBreakout board based on Time of Flight technology, carrying the VL53L0X sensor, a low drop-out linear voltage regulator and a MOSFET adapter for the I²C-Bus interface, used to shift the chip’s 0/2.8 V logic levels so that they match the standard TTL levels of conventional logic boards and of Arduino. Communication with the host device, typically a microcontroller, takes place over the I²C-Bus formed by the SCL and SDA pins, clock and bidirectional data channel respectively; through the bus (which runs at 400 kHz) you can set the operating mode, the sensitivity and so on, as well as read the result of the measurement
-
SensorsTOF (Time Of Flight) Module with VL6180 Sensor
€13.52excl. VAT€16.50incl. VATBreakout board based on Time of Flight technology with the VL6180 sensor
-
SensorsToF Laser Distance Sensor with VL53L3CX
€10.25excl. VAT€12.50incl. VATBoard based on Time of Flight technology, built around the VL53L3CX infrared laser sensor
-
Arduino compatibleTotem Mini Lab Experiment Platform
€91.80excl. VAT€112.00incl. VATTotem Mini Lab is a small but powerful electronics laboratory for experimenting with and learning the basics of electronics
-
DisplaysTouch Screen Display 7″ – 800×480 pixels
€40.16excl. VAT€49.00incl. VAT7″ colour display with capacitive touch screen, HDMI video input and 800×480 pixel resolution
-
Sensors -
IoT (Internet of Things)Trace&Follow – Energy Monitoring and Machine Control, WiFi-Ethernet with LoRa Interface
€450.82excl. VAT€550.00incl. VATTrace&Follow, developed by RedSmart (a business unit of IDT), is an advanced device for monitoring energy consumption in industrial machinery. With BLE, WiFi and Ethernet connectivity plus a LoRa expansion for LoRaWAN, Trace&Follow acquires digital signals, drives outputs and sends data over MQTT to a configurable broker.
-
IoT (Internet of Things)Trace&Follow – WiFi-Ethernet Energy Monitoring and Machine Control
€350.00excl. VAT€427.00incl. VATTrace&Follow, developed by RedSmart (a business unit of IDT), is an advanced industrial monitoring system designed to track and optimize energy consumption, raw material use and the production efficiency of machines in industrial plants