Track & wheel set for tracked models
€9.84excl. VAT€12.00incl. VATThe set contains everything needed to build the running gear of a tracked model
Robotics & development
784 products
Narrow by category
-
Actuators -
RobotsTracked robot with electronics, DC motors and wireless controller
€113.93excl. VAT€139.00incl. VATThis complete kit includes everything needed to build a tracked robot: aluminium alloy chassis, tracks, geared motors, Arduino compatible board, shield, wireless controller, DC motors, USB cable and mechanical hardware. The robot, driven by a 2.4 GHz wireless controller, can travel over rough ground and carry loads of up to 5 kg, and measures 200x185x60 mm. The electronics can be programmed as you wish using the Arduino IDE.
-
micro:bitTransparent Box for micro:bit
€2.87excl. VAT€3.50incl. VATTransparent protective enclosure made of plexiglass, suitable for housing micro:bit
-
Raspberry PiTransparent Case for Raspberry Pi Model A+
€4.02excl. VAT€4.90incl. VATTransparent protective case made of plexiglass (2 mm thick), suitable for housing the Raspberry Pi 3 Model A+ (version shown in photo)
-
Raspberry PiTransparent enclosure for Raspberry Pi 3 and 3.5” Monitor
€3.28excl. VAT€4.00incl. VATTransparent plastic enclosure specifically designed and drilled to house the Raspberry Pi B+ / 3B / 3B+ and the 3.5” monitor
-
Raspberry PiTrue color RGB HAT for Raspberry Pi
€12.13excl. VAT€14.80incl. VATHAT with 32 WS2812B LEDs arranged in four rows of eight, on the 40-pin GPIO connector, with Python examples and web control.
-
ESP8266 / ESP32TTGO LORA 868 MHZ with ESP32 and OLED
€45.90excl. VAT€56.00incl. VATCompact board built around the ESP32 Wi-Fi module and the 868 MHz LoRa™ SX1276 transceiver module
-
ESP8266 / ESP32TTGO T-CALL V1.3 ESP32 with SIM800L
€40.16excl. VAT€49.00incl. VATCompact board based on the ESP32 Wi-Fi module and the SIM800L GSM GPRS module
-
SensorsTwilight switch 10 A – 12 volt AC/DC
€4.92excl. VAT€6.00incl. VATTwilight switch for outdoor use with IPX3 protection rating
-
Control electronicsTX+RX Module Pair for Wireless Charging
€10.66excl. VAT€13.00incl. VATMade up of a transmitter module and a receiver module, it transfers power without cables
-
Arduino compatibleuChip: the Arduino Zero compatible micro board – with headers
€16.31excl. VAT€19.90incl. VATuChip is a very small Cortex M0 + development board
-
Arduino compatibleuChip: the micro board compatible with Arduino Zero – without headers
€15.57excl. VAT€19.00incl. VATuChip is a very small Cortex M0+ development board
-
SensorsUltra-compact module with PIR
€4.51excl. VAT€5.50incl. VATUltra-compact little module with a miniature PIR sensor, control board and an output to be interfaced to a microcontroller, Arduino and the like (high level 3 V – low 0 V)
-
SensorsUltrasonic Distance Sensor
€9.43excl. VAT€11.50incl. VATUltrasonic sensor module able to detect distance up to 4.5 metres with 0.5 cm accuracy. Waterproof 40 kHz ultrasonic capsule with a connecting cable over 2 metres long
-
SensorsUltrasonic distance sensor 2 to 450 cm
€4.10excl. VAT€5.00incl. VATUltrasonic sensor able to measure distances between 2 and 450 cm
-
SensorsUltrasonic distance sensor 2 to 450 cm + OUT
€5.33excl. VAT€6.50incl. VATUltrasonic sensor able to measure distances between 2 and 450 cm
-
SensorsUltrasonic Distance Sensor 60 cm to 5 m – Watertight
€38.52excl. VAT€47.00incl. VATUltrasonic sensor that measures distances between 60 cm and 5 metres
-
SensorsULTRASONIC RECEIVER CAPSULE
€2.87excl. VAT€3.50incl. VATReceives at 40 kHz for distance measurement and ultrasonic barriers, with a range of 0.2 to 6 meters and a sensitivity of -67 dB.
-
SensorsUltrasound and Bat Detector – Kit
€25.41excl. VAT€31.00incl. VATThis detector turns sounds the human ear cannot pick up, such as the frequencies emitted by bats, into audible sound
-
SensorsUltraviolet Sensor Module
€16.80excl. VAT€20.50incl. VATSmall module with a sensor that measures the UV intensity (UVI) of sunlight, lamps or other sources with a wavelength between 200 nm and 370 nm