ATTINY85 USB BOARD
€5.74excl. VAT€7.00incl. VATVery small board based on the ATtiny85 microcontroller
Robotics & development
784 products
Narrow by category
-
Arduino compatible -
ArduinoAudio Shield for Arduino – Solder-Yourself Kit
€15.98excl. VAT€19.50incl. VATBased on the ISD1760PY chip, this shield for Arduino (Duemilanove, UNO or Mega) records and plays back up to 60 seconds of music and speech
-
ActuatorsAutomatic changeover module 12-48VDC
€5.33excl. VAT€6.50incl. VATCompact automatic changeover module: connect an input voltage between 12 and 48 VDC (12, 24, 36, 48 VDC) and a battery of the same voltage as the input, and the output load (which must run on the same voltage as the input) stays powered even if the input voltage suddenly fails.
-
SensorsAutomatic Watering System for Indoor Plants with Moisture Sensor
€12.30excl. VAT€15.00incl. VATAutomatic watering system for indoor plants with moisture sensor, compatible with Arduino.
-
ActuatorsBall Caster
€8.11excl. VAT€9.90incl. VATThe ball caster is used as the third support point on robots. Made up of a small steel ball that rolls inside a plastic housing, it can be fitted so as to give two different heights, 25 and 35 mm
-
SensorsBall motion sensor
€1.23excl. VAT€1.50incl. VATBall motion sensor with a nickel-plated cylindrical body
-
SensorsBall-Type Vibration and Motion Sensor
€2.05excl. VAT€2.50incl. VATOmnidirectional mechanical motion sensor able to detect movement, tilt or vibration
-
ESP8266 / ESP32Base Board for NODE MCU ESP8266
€4.02excl. VAT€4.90incl. VATLets you test your own applications developed with the NODE MCU ESP8266 module.
-
ArduinoBattery Shield for Arduino – Solder-it-yourself Kit
€15.98excl. VAT€19.50incl. VATShield for the Arduino Uno, arranged to take the supply voltage of a battery on its input (through a terminal block, between 5 and 12 volts) and, using a particular feature of the PCF8593T chip (a clock/calendar normally employed as a clock and calendar), to switch the system on at fixed intervals chosen from software according to the conditions it finds
-
Arduino compatibleBeetle ATmega32U4 Board – assembled
€15.98excl. VAT€19.50incl. VATBased on the Atmel ATMEGA32U4 processor and clocked at 16 MHz, this tiny board can be thought of as a miniaturised Arduino Leonardo
-
Arduino compatibleBeginner kit for Arduino
€72.13excl. VAT€88.00incl. VATBuilt with quality electronic components, DFRobot’s Beginner Kit for Arduino is aimed at anyone who wants to get to know Arduino and electronics
-
IoT (Internet of Things)Big Relay Board for the Mercury System – 10 A
€13.93excl. VAT€17.00incl. VATExpansion board for the Mercury system with a single-channel relay able to switch loads up to 10A
-
Control electronicsBipolar Stepper Motor Driver 2.2A
€7.79excl. VAT€9.50incl. VATBuilt around the Texas Instruments DRV8825 chip, this small driver can control a single bipolar stepper motor with a max current
-
Raspberry PiBlack Aluminium Case for Raspberry Pi 4
€7.79excl. VAT€9.50incl. VATSturdy black aluminium enclosure designed for the Raspberry Pi 4, with dedicated openings for USB, Ethernet, HDMI and the I/O connectors, keeping the board protected and easy to use.
-
ArduinoBlack enclosure for Arduino Uno
€4.92excl. VAT€6.00incl. VATBlack ABS enclosure made specifically to house an Arduino UNO board, leaving the reset button accessible and allowing shields to be fitted
-
Raspberry PiBlack enclosure with fan for Raspberry Pi 3
€5.33excl. VAT€6.50incl. VATBlack ABS enclosure made and cut out specifically to house the Raspberry PI 3B / 3B+ / 2B / B+
-
BlebricksBLEBRICK 2-position mounting base
€6.56excl. VAT€8.00incl. VATTwo-position mounting base for connecting several Blebricks together.
-
BlebricksBlebrick 3-Axis Accelerometer
€15.57excl. VAT€19.00incl. VAT3-axis acceleration sensor that detects impacts, activity and changes in orientation.
-
BlebricksBLEBRICK 3-axis magnetic sensor
€11.48excl. VAT€14.00incl. VAT3-axis magnetic sensor capable of measuring magnetic fields up to 30 Gauss (G).
-
BlebricksBLEBRICK 3-Position Mounting Base
€8.20excl. VAT€10.00incl. VATThree-position mounting base that allows multiple Blebricks to be connected together.