Aluminium Coupler 5 mm – 8 mm
€1.56excl. VAT€1.90incl. VATAluminium coupler for use in robotics, mechanical work and the like
Robotics & development
784 products
Narrow by category
-
Accessories -
AccessoriesAluminium horn for RC servos
€2.46excl. VAT€3.00incl. VATAluminium horn for RC servos with a 25T spline (Futaba, savox, Xcore, HL, HSP, HD power, Go tech) and threaded holes
-
AccessoriesAluminium hub for SERVO213
€5.74excl. VAT€7.00incl. VATUniversal aluminium hub designed for use with the servo213 (MMG995) and with standard JR and FUTABA RC servos
-
SensorsAM2302 Temperature and Humidity Sensor – Wired
€7.79excl. VAT€9.50incl. VATCompact module built around the DHT22 temperature and relative humidity sensor. Its single-wire serial interface makes it easy to use
-
SensorsAMG8833 Thermal Image Sensor
€45.90excl. VAT€56.00incl. VATBreakout board based on the Panasonic AMG8833 sensor
-
SensorsAmplified microwave motion sensor
€13.52excl. VAT€16.50incl. VATCompact module combining a Doppler microwave motion sensor, a signal amplifier stage (not present on the bare sensor), two status LEDs and a trimmer for setting the detection range from 2 to 16 metres. It has a transmitting section and a receiving section
-
SensorsAnalogue Temperature Module – assembled
€6.56excl. VAT€8.00incl. VATBreakout board built around the LMT84DCKT analogue temperature sensor (SOT-23-5 package) and the Microchip MCP6L01T-E/LT op-amp, which amplifies the voltage the sensor delivers at its output
-
Arduino compatibleAntennino: the low-cost board for building remote sensors and actuators
€31.97excl. VAT€39.00incl. VATAntennino (the name Antennino comes from Antenna and Arduino) is a low-cost, low-power board based on the Atmel chip, and therefore 100% compatible with the traditional Arduino IDE
-
SensorsAPDS-9930 Ambient Light and Proximity Sensor Breakout
€4.10excl. VAT€5.00incl. VATBreakout board built around the Avago APDS-9930 ambient light sensor (ALS) and proximity sensor with infrared LED
-
SensorsAPDS-9960 Gesture Breakout Board
€6.15excl. VAT€7.50incl. VATBuilt around the APDS-9960 RGB and Gesture sensor; fitted with integrated UV and IR blocking filters, four separate diodes sensitive to different directions and an I²C-compatible interface, this small breakout board delivers light and colour measurement, proximity detection and contactless gesture detection at a distance of 10 to 20 cm
-
ArduinoArduino I/O expander shield
Price range: €34.00 through €52.00 incl. VATI/O expander shield for Arduino based on the Microchip MCP23017 chip
-
ArduinoArduino Mega2560 Rev3
€48.36excl. VAT€59.00incl. VATArduino Mega2560 Rev3 is a board built around the Atmega2560 microcontroller (datasheet)
-
ArduinoARDUINO MICRO WITH ATMEGA32U4
€24.18excl. VAT€29.50incl. VATArduino Micro is a board based on the ATmega32u4 microcontroller; developed together with Adafruit, it packs all the power of the Arduino Leonardo into just 48×18 mm
-
ArduinoArduino MKR WIFI 1010
€38.52excl. VAT€47.00incl. VATThe Arduino MKR WIFI 1010 was designed to speed up and simplify the prototyping of Wi-Fi based IoT applications, thanks to the flexibility of the U-BLOX NINA-W10 ESP32 module and its low power consumption.
-
ArduinoArduino NANO ESP32 with Wi-Fi and Bluetooth
€18.44excl. VAT€22.50incl. VATArduino Nano ESP32 is a compact, powerful board with built-in Wi-Fi and Bluetooth, based on the ESP32-S3 microcontroller. Perfect for IoT, home automation and robotics projects, it delivers high performance in a compact form factor.
-
ArduinoArduino Nano Every board
€15.41excl. VAT€18.80incl. VATBuilt around the ATMega4809 microcontroller and the ATSAMD11D14A microcontroller, the Arduino Nano Every offers 48KB of program memory, 14 digital inputs/outputs (5 of which can be used as PWM outputs), 8 analogue inputs, a 20 MHz oscillator and a micro USB connector
-
ArduinoArduino Nano Matter – IoT Board with Matter® and Bluetooth
€20.41excl. VAT€24.90incl. VATBuild home automation projects and smart devices with ease using the Arduino Nano Matter. This compact, versatile board supports Matter®, the open standard that guarantees compatibility between smart devices from different brands, keeping your IoT projects secure and easy to connect.
-
ArduinoArduino Nano Matter – IoT Board with Pre-Soldered Strips, Matter® and Bluetooth
€21.23excl. VAT€25.90incl. VATEasily build home automation projects and smart devices with the Arduino Nano Matter. This compact, versatile board supports Matter®, the open standard that ensures compatibility between smart devices from different brands, keeping your IoT projects secure and easily connected.
Version supplied with pre-soldered strips, ready to use.
-
ArduinoArduino NANO R4 with Renesas RA4M, USB-C and Qwiic
€14.67excl. VAT€17.90incl. VATNano R4 combines a small footprint, real processing power and ease of use, taking you quickly from prototype to professional production-ready solutions.
-
ArduinoArduino Nano V3.3
€27.87excl. VAT€34.00incl. VATArduino Nano is the breadboard version with an integrated USB port