5-wire Stepper Motor + ULN2003 Driver
€4.51excl. VAT€5.50incl. VATSet made up of a stepper motor driver based on the ULN2003 chip and a 4-phase stepper motor
Robotics & development
784 products
Narrow by category
-
Control electronics -
Actuators5.5kg/cm Servo Motor, Plastic Gears, 180°
€6.56excl. VAT€8.00incl. VAT42.5 gram analogue servo with accessories included, powered from 4.8 to 6 Vdc: turns 60 degrees in 0.19 seconds.
-
Displays5″ Touch Screen Display – 800×480 pixels
€29.51excl. VAT€36.00incl. VAT5″ colour display with resistive touch screen, HDMI video input and a resolution of 800×480 pixels
-
Actuators5″ wheel for power motor with HUB
€16.31excl. VAT€19.90incl. VATABS wheel with an outer diameter of about 127 mm and a TPE tyre 25.4 mm wide
-
Displays5” resistive touch screen display 800×480
€48.36excl. VAT€59.00incl. VATIt connects to the Raspberry Pi over HDMI and sends the touch data over micro USB; it has a switch to turn the backlight off. Raspberry not included.
-
Sensors50 kg load cell
€5.74excl. VAT€7.00incl. VATLoad cell made of a metal body and small elements called strain gauges bonded at precise points on that body
-
IoT (Internet of Things)6-Channel Servo Board for the Mercury System
€13.11excl. VAT€16.00incl. VAT6-channel servo board able to generate and hold an RC servo control signal on each channel
-
Sensors6-in-1 Environmental Breakout: Air Quality, TVOC, CO₂, Pressure, Temperature and Humidity
€36.89excl. VAT€45.00incl. VATCompact breakout based on the AMS CCS811 air-quality sensor, the Bosch BMP280 digital pressure sensor and the Silicon Labs Si7021 temperature and humidity sensor
-
Robots6-in-1 Solar Powered Educational Kit
€6.48excl. VAT€7.90incl. VATEspecially good as an educational toy for children and not only for them, this kit lets you build 6 different solar gadgets: a windmill, a dog, a boat, a car, an air-boat simulation and a solar turntable
-
Robots6-wheel mini solar rover
€20.08excl. VAT€24.50incl. VATEspecially good as an educational toy for children (from 8 years up), and not only, this kit builds a mini solar rover with 6 wheels (4 of them driven)
-
Sensors600°C temperature probe with interface
€15.57excl. VAT€19.00incl. VATSet consisting of a module based on the Maxim MAX6675 chip and a “K” type thermocouple with a temperature range from 0°C to +600°C. The MAX6675 digital converter provides a digital serial interface compatible with Arduino, Fishino and other microcontrollers
-
PC storage64GB SD Card with RetroPie System
€13.85excl. VAT€16.90incl. VAT64GB micro SD card loaded with our build of RetroPie
-
Actuators65 mm Wheel with 12 mm Hub Coupling
€2.38excl. VAT€2.90incl. VAT65 mm diameter wheel, soft rubber tyre with a width of 26 mm, and a hub coupling with 12 mm hex (see related products)
-
Robots6DOF Robotic Arm with Gripper and RC Servos
€105.74excl. VAT€129.00incl. VATThis kit contains everything needed to build a complete robotic arm with a gripper for picking up objects
-
Displays7″ QLED Touchscreen Display – 1024×600 Pixels
€77.05excl. VAT€94.00incl. VATQLED (QUANTUM DOT LED) colour display, 7 inches, with capacitive touchscreen, tempered glass, HDMI video input and a resolution of 1024×600 pixels.
-
Actuators7×16 mm DC Micro Motor – 40,000 rpm
€2.05excl. VAT€2.50incl. VATMicro motor with a rotation speed of 40,000 rpm, a 3.7 VDC supply and a current draw of 110 mA (1.54 A when stalled)
-
Raspberry Pi8 Megapixel Camera Module for Raspberry Pi
€36.07excl. VAT€44.00incl. VATSmall Raspberry Pi module with an 8 megapixel Sony IMX219PQ image sensor and fixed 1/4″ optics
-
Accessories8 mm Linear Bearing Mount – 2 pcs
€7.38excl. VAT€9.00incl. VATThis aluminium mount with an 8 mm linear bearing (inner diameter) and four partially threaded holes can be used in applications requiring precision linear motion, such as printers, plotters, CNC machines and similar
-
Accessories8 mm Shaft Wheel Coupler – 12 mm Hex
€1.23excl. VAT€1.50incl. VATWheel coupler complete with grub screw and screw, for 8 mm diameter motor shaft and wheel. Hex size: 12 mm, hex height: 5.5 mm, threaded hole diameter on hex side: 4 mm, diameter of cylindrical part: 11.5 mm, threaded hole diameter on cylindrical part: 3 mm, total length: 17.8 mm, weight: about 11.5 grams. Can be used in robotics, mechanics, etc.
-
Raspberry Pi8-Channel ADC Expansion Shield for Raspberry Pi
€13.52excl. VAT€16.50incl. VATExpansion shield module for Raspberry Pi, based on the 10-bit MCP3008 analogue-to-digital converter, which allows up to 8 input channels to be connected, each one on its own pin