MQ-7 Gas Sensor Board
€5.57excl. VAT€6.80incl. VATDetects carbon monoxide between 20 and 2,000 ppm, with analogue and digital outputs and a threshold trimmer; 2.5 to 5 Vdc supply.
New products
All new products →
Multicolour Layered Case for Raspberry Pi 2 and 3 Model B / B+
€5.53excl. VAT€6.75incl. VAT
Read more
ESP32 – Development board with Wi-Fi, Bluetooth and USB Type-C connector
€11.48excl. VAT€14.00incl. VAT
Read more
2-Channel Programmable Signal Generator – 1 nHz to 80 MHz, 300 MSa/s Sample Rate
€278.69excl. VAT€340.00incl. VAT
Read more
All products
Narrow by category
All
Robotics › Sensors187
Enclosures143
Arduino compatible115
Raspberry Pi115
Breakout boards › Sensors112
Buttons, switches & joysticks109
Actuators100
Soldering100
Arduino94
Resistors86
Displays84
Lab cables83
LEDs83
Light bulbs78
Counts based on the first 4198 matches.
-
Sensors -
SensorsGAS sensor board – MQ-2
€5.57excl. VAT€6.80incl. VATCompact board built around a high-sensitivity semiconductor smoke sensor, with a wide detection range, fast response, good stability and a long service life
-
SensorsSoil Moisture Sensor Board
€3.69excl. VAT€4.50incl. VATPCB probe with analogue output that, when connected to an Arduino or another microcontroller, measures the soil moisture percentage, for example in a flower pot
-
SensorsHMMD 24 GHz Motion Sensor – Micro-Motion Radar
€4.51excl. VAT€5.50incl. VAT24 GHz mmWave radar sensor for accurate detection of human micro-motion, even when the person is standing still. HMMD technology, compatible with Arduino, ESP32, Raspberry Pi and Jetson Nano. Ready to use, ideal for smart projects.
-
SensorsMagnetic Sensor Board
€5.57excl. VAT€6.80incl. VATBased on the Freescale MAG31110 chip, this compact board measures magnetic fields
-
SensorsLiquid Level Sensor Board – 48 mm sensing depth
€3.69excl. VAT€4.50incl. VATImmersed in a liquid it returns a voltage proportional to the level, down to a depth of 48 mm; it runs on 2 to 5 Vdc.
-
SensorsST188 IR Reflective Obstacle Sensor Board
€4.26excl. VAT€5.20incl. VATModule fitted with a reflective infrared sensor (ST188), an LM393 voltage comparator, a sensitivity adjustment trimmer and both analogue and digital outputs
-
SensorsIR proximity sensor
€4.10excl. VAT€5.00incl. VATProximity sensor built around a voltage comparator chip, an infrared transmitter and an infrared receiver, with a trimmer for sensitivity adjustment, analogue and digital outputs and two status LEDs for power and output signal
-
SensorsUV Sensor Board 200-370 nm
€9.43excl. VAT€11.50incl. VATSmall module fitted with a sensor able to measure the UV intensity of sunlight, lamps or other sources, with a wavelength between 200 nm and 370 nm
-
SensorsMotion sensor board with mercury switch
€3.69excl. VAT€4.50incl. VATMotion sensor using a mercury switch
-
SensorsAPDS-9960 Gesture Breakout Board
€6.15excl. VAT€7.50incl. VATBuilt around the APDS-9960 RGB and Gesture sensor; fitted with integrated UV and IR blocking filters, four separate diodes sensitive to different directions and an I²C-compatible interface, this small breakout board delivers light and colour measurement, proximity detection and contactless gesture detection at a distance of 10 to 20 cm
-
Sensors“S” Type Load Cell – 500 kg Range
€52.46excl. VAT€64.00incl. VATStainless steel “S” type load cell, C3 accuracy class, 500 kg range and two M12 threaded holes
-
Sensors“S”-type load cell, 200 kg range
€52.46excl. VAT€64.00incl. VATS-type load cell made of stainless steel, C3 accuracy class, 200 kg range and two M12 threaded holes
-
Sensors“S” type load cell – 100 kg range
€52.46excl. VAT€64.00incl. VATStainless steel “S” type load cell, C3 accuracy class, 100 kg range and two M12 threaded holes
-
SensorsAir quality sensor breakout board – SGP30
€15.98excl. VAT€19.50incl. VATBuilt around the Sensirion SGP30 air quality sensor, this very small breakout board reports the carbon dioxide concentration (telling you how stale the air in a closed room is) and the TVOC (Total Volatile Organic Compounds), that is the concentration in parts per billion of airborne particles
-
SensorsElectronic Scale Kit with 20 kg Load Cell and HX711 Board
€22.95excl. VAT€28.00incl. VATSet consisting of an interface board and a 20 kg load cell mounted inside a mechanical frame. The board is based on the HX711 chip, a 24-bit analogue-to-digital converter designed to connect the load cell to a microcontroller such as Arduino, Fishino or compatible boards
-
SensorsSoil Moisture Sensor Module
€9.43excl. VAT€11.50incl. VATMade up of a probe with two metal terminals and a small module based on the LM393 IC, it measures the moisture content of the soil, for example in a flower pot
-
SensorsSoil Temperature and Humidity Sensor – SHT20
€27.87excl. VAT€34.00incl. VATTemperature and humidity sensor based on the Sensirion CMOSens® SHT20 4C
-
SensorsPhotoelectric Switch with Visible-Light LASER
€22.95excl. VAT€28.00incl. VATBuilt from a visible-light LASER (emitter) and a photodiode receiver, this photoelectric switch can detect extremely small objects (down to 0.8 mm) with a response time of less than 2 ms
-
SensorsGP2Y1010AU0F – Optical dust sensor
€12.30excl. VAT€15.00incl. VATThe Sharp GP2Y1010AU0F is an optical air-quality sensor designed to detect dust particles