RTC Shield for Raspberry and Arduino
€13.93excl. VAT€17.00incl. VATNew Real Time Clock shield that fits both an Arduino Uno R3 board and a Raspberry Pi 2 / 3B / 3B+
Narrow by category
All
Robotics › Sensors187
Enclosures143
Arduino compatible115
Raspberry Pi115
Breakout boards › Sensors112
Buttons, switches & joysticks109
Actuators100
Soldering100
Arduino94
Resistors86
Displays84
Lab cables83
LEDs83
Light bulbs78
Counts based on the first 4198 matches.
-
Arduino -
ArduinoArduino shield for RC servo control
€24.18excl. VAT€29.50incl. VATShield for Arduino/Fishino UNO that drives up to six RC servos, both traditional 3-pin ones (+5V / – / PWM ) and 4-pin servos with feedback (+5V / – / PWM / Feedback )
-
Control electronicsStepper Motor Control Board with DRV8825 and ATmega32U4
€27.87excl. VAT€34.00incl. VATControl board for stepper motors with a DRV8825 driver and an ATmega32U4 microcontroller for open-loop control of stepper motors, programmable with the Arduino IDE.
-
ArduinoMIDI shield with VS1053B
€15.57excl. VAT€19.00incl. VATArduino shield based on the VLSI Ogg Vorbis/MP3/AAC/WMA/MIDI audio decoder chip (VS1053B)
-
Arduino compatibleI/O Side Panel for Mini Lab
€30.33excl. VAT€37.00incl. VATThe input/output side panel is designed to be used as an add-on for the Totem Mini Lab
-
Arduino compatiblePRO midi 1284P Developer’s Board
€15.57excl. VAT€19.00incl. VATDeveloper’s board designed specifically for use with the PRO midi 1284 prototyping board
-
Arduino compatibleSensor Side Panel for Mini Lab
€32.38excl. VAT€39.50incl. VATThe sensor and display side panel is designed to be used as an add-on for the Totem Mini Lab (not included, see related products)
-
Arduino compatibleTotem Mini Lab Experiment Platform
€91.80excl. VAT€112.00incl. VATTotem Mini Lab is a small but powerful electronics laboratory for experimenting with and learning the basics of electronics
-
FishinoClear Case for Fishino UNO
€4.02excl. VAT€4.90incl. VATClear protective case made of 2 mm thick plexiglass, sized to house the Fishino Uno (the version shown in the photo)
-
FishinoClear plastic enclosure for Fishino Mega
€4.84excl. VAT€5.90incl. VATClear protective enclosure made of plexiglass (2 mm thick), sized to house the Fishino Mega
-
FishinoClear plastic case for FISHINO32
€4.02excl. VAT€4.90incl. VATClear protective case made of plexiglass (2 mm thick), designed to house the Fishino32
-
ArduinoWiznet Ethernet Shield for Arduino
€18.85excl. VAT€23.00incl. VATDevice built around the Wiznet W5100 ethernet chip (datasheet) that connects an Arduino or Seeeduino board to a LAN using the Ethernet library
-
ArduinoPrototyping PCB for Arduino
€2.05excl. VAT€2.50incl. VATPerforated prototyping printed circuit board.
-
ArduinoXBEE SHIELD (WITHOUT XBEE MODULE)
€16.80excl. VAT€20.50incl. VATThe Xbee shield lets an Arduino board communicate wirelessly using Zigbee
-
Arduino compatibleuChip: the Arduino Zero compatible micro board – with headers
€16.31excl. VAT€19.90incl. VATuChip is a very small Cortex M0 + development board
-
Arduino compatibleuChip: the micro board compatible with Arduino Zero – without headers
€15.57excl. VAT€19.00incl. VATuChip is a very small Cortex M0+ development board
-
Arduino compatibleAntennino: the low-cost board for building remote sensors and actuators
€31.97excl. VAT€39.00incl. VATAntennino (the name Antennino comes from Antenna and Arduino) is a low-cost, low-power board based on the Atmel chip, and therefore 100% compatible with the traditional Arduino IDE
-
ArduinoOctopus – 16 I/O Shield – kit
€23.77excl. VAT€29.00incl. VATExpansion shield, compatible with the various Arduino boards and with our Fishino UNO, which adds a full 16 PWM outputs and 16 extra digital inputs/outputs while using practically no hardware resources
-
Arduino compatibleMiniduino – Mini Arduino Pen Drive with Battery Charger
€18.03excl. VAT€22.00incl. VATMiniduino is a tiny (19x40x3.5 mm excluding the pin strips and the USB connector) Arduino board with minimal hardware but access to all the I/O just like the Nano, and with a direct-plug USB connector built into the PCB: an Arduino pen drive, in effect.
-
FishinoGuppy – Fishino Nano Board
€31.97excl. VAT€39.00incl. VATFishino GUPPY is a board 100% compatible with the well-known Arduino NANO