CLEAR ENCLOSURE FOR ARDUINO UNO
€3.20excl. VAT€3.90incl. VATClear protective enclosure in tough acrylic plastic, sized to house the Arduino Uno R3.
Narrow by category
All
Robotics › Sensors187
Enclosures143
Arduino compatible115
Raspberry Pi115
Breakout boards › Sensors112
Buttons, switches & joysticks109
Actuators100
Soldering100
Arduino94
Resistors86
Displays84
Lab cables83
LEDs83
Light bulbs78
Counts based on the first 4198 matches.
-
Arduino -
ArduinoFM Radio Shield for Arduino – Assembled
€31.97excl. VAT€39.00incl. VATFM radio shield with RDS for Arduino, with a 2.8 W class D amplifier
-
ArduinoMotor Shield for Arduino – Assembled
€30.33excl. VAT€37.00incl. VATShield for Arduino built around the L298P dual full-bridge driver, able to drive DC motors as well as stepper motors
-
Arduino2.4” touch display shield for Arduino
€11.89excl. VAT€14.50incl. VATTouch display shield for Arduino built around a 2.4″ resistive TFT LCD display, ILI9341 graphic controller, 320×240 pixel resolution, 260,000 colours, SD card slot and SPI interface
-
ArduinoScrew terminal shield for Arduino
€4.84excl. VAT€5.90incl. VATThe screw terminal shield for Arduino is an expansion board that brings all the input/output and power pins of the Arduino board out to convenient screw terminals.
-
ArduinoBox of 37 sensors for Arduino/Raspberry Pi/robotics
€24.51excl. VAT€29.90incl. VATPack containing 37 sensors for use with the main development platforms
-
Arduino2-Channel DC Motor Speed Control Shield
€11.48excl. VAT€14.00incl. VATArduino shield based on the L298P dual full-bridge driver, able to drive 2 DC motors (or one stepper motor) with a supply voltage between 4.8 and 24 VDC and a current of up to 2 A (2.5 A peak)
-
ArduinoUniversal Acrylic Holder for Arduino UNO and 400-Point Breadboard
€2.05excl. VAT€2.50incl. VATUniversal holder in clear acrylic for Arduino UNO and a 400-point breadboard, ideal for prototyping projects.
-
ArduinoLCD keypad shield for Arduino
€10.57excl. VAT€12.90incl. VATShield for Arduino (Uno Rev3, Mega, Duemilanove and Leonardo) with a 16×2 LCD display, white characters, blue backlight, contrast trimmer, 6 buttons (Up, Down, Left, Right, Select and Reset) and pads for an ICSP connector
-
ArduinoShield for PS2 controllers
€23.77excl. VAT€29.00incl. VATThis shield for Arduino (Uno, Duemilanove, Mega and Leonardo), fitted with an Arduino reset button, a jumper to set the Baud Rate (9600, 57600, 115200), a status LED and jumpers to choose different pins for UART TX and RX, lets you use the wireless (or wired) Playstation 2 controller to drive robots or other devices remotely
-
ArduinoShield for G15 Servo Cube
€11.48excl. VAT€14.00incl. VATCompatible with Arduino UNO, Duemilanove, Mega and Leonardo, this shield lets you drive Cytron G15 Servo Cube serial servos and the Dynamixel AX-12 servo
-
ArduinoProtoboard Shield for Arduino
€4.10excl. VAT€5.00incl. VATProto shield compatible with Arduino UNO R3 and Leonardo
-
ArduinoEL shield for Arduino
€28.69excl. VAT€35.00incl. VATThe EL Shield lets Arduino drive up to 4 electroluminescent strips with an operating voltage of up to 160 Vac; in this configuration the shield can drive strips up to 15 metres long
-
ArduinoBlack enclosure for Arduino Uno
€4.92excl. VAT€6.00incl. VATBlack ABS enclosure made specifically to house an Arduino UNO board, leaving the reset button accessible and allowing shields to be fitted
-
ArduinoSensor Shield for Arduino
€9.02excl. VAT€11.00incl. VATThis shield makes it easy to connect modules such as sensors, servos, relays, buttons, potentiometers and more to Arduino
-
DisplaysArduino TFT Touch Screen Shield 3.5”
€26.23excl. VAT€32.00incl. VATShield for Arduino Uno built around a 3.5″ TFT LCD display with resistive touch screen, ILI9486 graphics controller, 480×320 pixel resolution, 65,000 colours, white LED backlight, SD card slot and SPI interface
-
ArduinoArduino TFT touch screen shield 2.8”
€22.95excl. VAT€28.00incl. VATArduino shield made up of a 2.8″ TFT LCD display with resistive touch screen, ST7789V graphics controller, 320×240 pixel resolution, 262,000 colors, white LED backlight, SD card slot and SPI interface
-
DisplaysEPAPERHAT 2.13 inch e-Paper module 250×122
€17.21excl. VAT€21.00incl. VATEPAPERHAT is an e-Paper or Paper Ink (electrophoretic) display with a built-in graphic controller and a connector for use with Raspberry Pi 2B / 3B / 3B+ / Zero / Zero W
-
DisplaysEPAPERUART 4.3 inch e-Paper module 800×600
€72.95excl. VAT€89.00incl. VAT4.3 inch e-Paper or Paper Ink (electrophoretic) display with a resolution of 800 (H) x 600 (V) pixels
-
DisplaysEPAPERUART 2.9 inch e-Paper module 296×128
€20.49excl. VAT€25.00incl. VATe-Paper or Paper Ink display (electrophoretic), active matrix TFT