AMG8833 Thermal Image Sensor
€45.90excl. VAT€56.00incl. VATBreakout board based on the Panasonic AMG8833 sensor
Breakout boards
123 products
Narrow by category
-
Sensors -
SensorsAmplified microwave motion sensor
€13.52excl. VAT€16.50incl. VATCompact module combining a Doppler microwave motion sensor, a signal amplifier stage (not present on the bare sensor), two status LEDs and a trimmer for setting the detection range from 2 to 16 metres. It has a transmitting section and a receiving section
-
SensorsAnalogue Temperature Module – assembled
€6.56excl. VAT€8.00incl. VATBreakout board built around the LMT84DCKT analogue temperature sensor (SOT-23-5 package) and the Microchip MCP6L01T-E/LT op-amp, which amplifies the voltage the sensor delivers at its output
-
SensorsAPDS-9930 Ambient Light and Proximity Sensor Breakout
€4.10excl. VAT€5.00incl. VATBreakout board built around the Avago APDS-9930 ambient light sensor (ALS) and proximity sensor with infrared LED
-
SensorsAPDS-9960 Gesture Breakout Board
€6.15excl. VAT€7.50incl. VATBuilt around the APDS-9960 RGB and Gesture sensor; fitted with integrated UV and IR blocking filters, four separate diodes sensitive to different directions and an I²C-compatible interface, this small breakout board delivers light and colour measurement, proximity detection and contactless gesture detection at a distance of 10 to 20 cm
-
SensorsAutomatic Watering System for Indoor Plants with Moisture Sensor
€12.30excl. VAT€15.00incl. VATAutomatic watering system for indoor plants with moisture sensor, compatible with Arduino.
-
SensorsBME280 – Pressure, humidity and temperature sensor
€9.02excl. VAT€11.00incl. VATUltra-small module (13.3×10.6×3.5 mm) built around the BME280 pressure, humidity and temperature sensor
-
SensorsBMP280 Pressure Sensor
€3.69excl. VAT€4.50incl. VATBased on the Bosch BMP280 digital pressure sensor, it measures absolute ambient pressure and converts the reading into an altitude
-
ArduinoBox of 37 sensors for Arduino/Raspberry Pi/robotics
€24.51excl. VAT€29.90incl. VATPack containing 37 sensors for use with the main development platforms
-
SensorsBreakout board with AC current sensor 5 A
€4.02excl. VAT€4.90incl. VATWith a single-phase inductive sensor, this breakout board measures an alternating current (max
-
SensorsCapacitive moisture sensor for plants
€11.07excl. VAT€13.50incl. VATBased on capacitive moisture sensing and powered by a CR2032 battery (3 volts), this sensor is used as a watering alarm for plants
-
SensorsCCS811 Air Quality Module
€22.95excl. VAT€28.00incl. VATCompact breakout board based on AMS’s CCS811 air-quality sensor.
-
Weather sensorsCO2 GAS Sensor – SCD41
€31.97excl. VAT€39.00incl. VATCompact, high-precision sensor for monitoring CO₂, temperature and humidity, ideal for home automation projects, weather stations and IoT systems based on Arduino, ESP32 and Raspberry Pi.
-
SensorsCO2 Sensor Module – MH-Z19B
€48.36excl. VAT€59.00incl. VATMeasures carbon dioxide from 0 to 5,000 ppm with NDIR infrared sensing and reports it on UART and PWM outputs; runs on 5 V.
-
SensorsCO2 sensor module – MH-Z19C
€40.16excl. VAT€49.00incl. VATIntegrate the MH-Z19C sensor into your projects. Lets you monitor CO2 concentration in indoor environments simply and efficiently.
-
Presence & intrusion sensorsCompact PIR Sensor with TTL Output – Adjustable Range up to 7m
€4.10excl. VAT€5.00incl. VATCompact PIR sensor with control board and TTL output (high level 3.3V – low 0V)
-
ADC / DACDAC Audio Converter with I2S Interface
€9.84excl. VAT€12.00incl. VATDigital-to-analogue audio converter with I2S interface.
-
SensorsDHT11 Temperature and Humidity Sensor Board
€3.69excl. VAT€4.50incl. VATThree-pin output module with DHT11 sensor
-
SensorsDS18B20 temperature sensor – assembled board
€8.20excl. VAT€10.00incl. VATBreakout board based on the Maxim Dallas DS18B20 semiconductor temperature sensor (TSSOP version)
-
RTC (real-time clocks)DS3231 RTC module with 32Kb EEPROM memory
€5.33excl. VAT€6.50incl. VATRTC (Real Time Clock) module based on the DS3231 chip