DC motor driver IC (SMD)
€4.51excl. VAT€5.50incl. VATThe Sanyo LB1836M chip has two independent H-bridges
Electronic components
775 products
Narrow by category
-
Special functions -
Cooling & heatingDedicated Cooling Fan for Jetson Nano
€4.10excl. VAT€5.00incl. VATDedicated cooling fan for Jetson Nano with PWM speed control
-
DisplaysDisplay LCD SPI 1.28″ – 240×240 pixels
€17.21excl. VAT€21.00incl. VATOriginal round color display (RGB 65K), 1.8″
-
Relays & coilsDouble Changeover Relay 230 Vac – 8A
€9.02excl. VAT€11.00incl. VATPCB-mount power relay, DPDT double changeover
-
Buttons, switches & joysticksDPDT Momentary Toggle Switch (ON)-OFF-(ON)
€5.25excl. VAT€6.40incl. VATDouble-pole momentary toggle switch, rated for loads drawing up to 10 A at 250 V
-
Buttons, switches & joysticksDPST Black Power Rocker Switch, 5 A / 250 Vac
€1.15excl. VAT€1.40incl. VATOn/off DPST switch (double switch), contact rating: 5 A / 250 Vac, 10 A / 125 Vac, average mechanical life: 50000, cycles (on-off), contact resistance: < 20Ohm, insulation resistance: 1000 MOhm, dielectric strength: >1500 V: 1 minute – >3000 V: between poles, operating temperature: -30
-
DisplaysDRIVER MODULE FOR DOT MATRIX DISPLAYS
€18.85excl. VAT€23.00incl. VATBased on the PIC16F723 microcontroller, this board drives dot matrix displays (see related products)
-
MicrocontrollersDSPIC33FJ64GP804-I/PT Microchip 16-bit DSC – 44-pin TQFP
€7.05excl. VAT€8.60incl. VATDSPIC33FJ64GP804-I/PT Microchip 16-bit Digital Signal Controller – 44-pin TQFP – 35 Input/Output ports – 64 kbyte Flash program memory.
-
DisplaysDual Alphanumeric LED Display – 25×21 mm
€4.10excl. VAT€5.00incl. VATDual alphanumeric (14-segment) red LED display with common anode
-
Special functionsDual Full-Bridge Driver for DC and Stepper Motors
€3.11excl. VAT€3.80incl. VATDual full-bridge driver for DC motors and stepper motors
-
ResistorsDual linear potentiometer 100 kohm
€1.48excl. VAT€1.80incl. VATDual linear potentiometer, 100KΩ, with 6 terminals, ideal for precise signal adjustment in electronic and audio circuits. Fitted with a knurled, split shaft, compatible with most standard knobs.
-
Electronic componentsElectromagnet Breakout Board
€8.03excl. VAT€9.80incl. VATElectromagnet with a holding force of up to 25 newtons, about 2.5 kg, driven by a single logic pin and powered from 3.3 to 5 Vdc.
-
TransformersEncapsulated PCB Transformer 230 Vac / 9 V – 2.4 VA
€4.92excl. VAT€6.00incl. VATEncapsulated 230 Vac to 9 V transformer, ideal for PCB mounting. Compact, safe and reliable, it provides galvanic isolation and withstands up to 4 kV. Perfect for power supplies, electronic controls and embedded systems.
-
TransformersEncapsulated PCB Transformer 6 VA, 230 / 12 V
€11.07excl. VAT€13.50incl. VATEncapsulated PCB-mount transformer rated at 6 VA, delivering an output of 12 V / 0.5 A.
-
TransformersEncapsulated Transformer 230VAC/12V – 2.3VA for PCB Mounting
€5.33excl. VAT€6.50incl. VATEncapsulated transformer from 230 Vac to 12V, ideal for PCB mounting. Compact, safe and reliable, it ensures galvanic isolation and withstands up to 4 kV. Perfect for power supplies, electronic controls and embedded systems.
-
DisplaysEPAPERHAT 2.13 inch e-Paper module 250×122
€17.21excl. VAT€21.00incl. VATEPAPERHAT is an e-Paper or Paper Ink (electrophoretic) display with a built-in graphic controller and a connector for use with Raspberry Pi 2B / 3B / 3B+ / Zero / Zero W
-
DisplaysEPAPERHAT 7.5 inch 800×480 pixel – black and white
€68.03excl. VAT€83.00incl. VAT7,5” e-Paper or Paper Ink (electrophoretic) display with black and white characters, two grey levels, and a connector for use with Raspberry Pi and Jetson Nano
-
DisplaysEPAPERUART 2.9 inch e-Paper module 296×128
€20.49excl. VAT€25.00incl. VATe-Paper or Paper Ink display (electrophoretic), active matrix TFT
-
DisplaysEPAPERUART 4.3 inch e-Paper module 800×600
€72.95excl. VAT€89.00incl. VAT4.3 inch e-Paper or Paper Ink (electrophoretic) display with a resolution of 800 (H) x 600 (V) pixels
-
DisplaysESP32 Module with 2.8″ TFT Touch Display
€18.03excl. VAT€22.00incl. VATESP32-based development module with a 2.8″ TFT touch display, Wi-Fi/Bluetooth connectivity and a MicroSD slot for embedded and IoT applications.