Protoshield for Arduino
€3.28excl. VAT€4.00incl. VATFree 2.54 mm pitch area to build your own circuit on top of Arduino, with two push-buttons, two LEDs and a mini breadboard included.
371 products
ArduinoFree 2.54 mm pitch area to build your own circuit on top of Arduino, with two push-buttons, two LEDs and a mini breadboard included.
Arduino compatiblePrototyping board with 260 pads on a 2.54 mm pitch and a 2×15-pin male connector (M-BUS) for use with the M5STACK
micro:bitThis prototyping board is ideal for getting started right away experimenting with micro:bit.
Raspberry PiPrototyping board made specifically to be fitted on the Raspberry Pi board through the 40-pin GPIO connector
Raspberry PiPrototyping board made specifically to fit the Raspberry Pi board (model B rev.2), letting you test your own applications without having to make a dedicated printed circuit board
Development systemsPrototyping board with RP2040 and 868 MHz LoRa.
ESP8266 / ESP32Prototyping module complete with frame, 250 pads on a 2.54 mm pitch, 2×15 pin male connector (M-BUS), 2×15 pin female connector (M-BUS) and magnets, for use with the M5STACK
ArduinoPerforated prototyping printed circuit board.
IoT (Internet of Things)Expansion board for the Mercury system
micro:bitKit containing one Micro:bit V2 board, a battery holder with on/off switch for 2 AA 1.5 volt batteries, four AA 1.5 volt batteries, a micro B USB cable, a 9 gram mini RC servo, an RC servo extension lead with male dupont pins, two 5 mm yellow LEDs, two 5 mm green LEDs, two 5 mm red LEDs, six 100 ohm ¼ watt resistors, three quick-wiring terminal blocks, a set of ten crocodile clip leads, a quick start guide in English (updated for micro:bit V2) and a cardboard box designed to be used in some of your own projects.
Raspberry PiRaspberry Pi Pico is a small, fast and versatile board built using the RP2040 chip, a brand-new chip designed by the Raspberry Pi Foundation in the United Kingdom
Mains power suppliesOfficial power supply for Raspberry Pi 5 with 27W output and a Type-C connector. It delivers optimal performance for powering Raspberry Pi 5 and high-power-consumption peripherals.
Raspberry PiThe Raspberry Pi 3 model B is the third generation of Raspberry Pi
Raspberry PiRaspberry Pi 3 Model B+ with a 64-bit quad-core ARM Cortex A53 CPU clocked at 1.4 GHz; on-board WiFi (IEEE 802.11ac) built around a 2.4 GHz and 5 GHz IEEE 802.11.b/g/n/a controller, with Ethernet that can negotiate connections on a Gigabit ethernet network while running at 300 Mbps; Bluetooth 4.2 LE
Raspberry PiSet made up of the Raspberry Pi 3B Plus board and a switching power supply with a 5 Vdc – 2.5 A output, four interchangeable plugs (UK, Euro, US and Australia) and a cable with a micro USB connector.
Raspberry PiThe Raspberry Pi 4 Model B board is the fourth generation made by the Raspberry Foundation. Not only is it good for learning to program, develop and play, it is also perfect for IoT projects
Raspberry PiRaspberry Pi 4 Model B is the fourth generation produced by the Raspberry Foundation. Not only is it good for learning to code, develop and play, it is also perfect for IoT projects
Raspberry PiRaspberry Pi 4 Model B is the fourth generation produced by the Raspberry Pi Foundation. Not only is it suitable for learning to program, develop and play, but it is also perfect for IoT projects
Raspberry PiRaspberry Pi 400 is a complete personal computer that builds a 4GB Raspberry Pi 4 board with a 64-bit quad-core processor into the (Italian) keyboard, along with Wi-Fi, Bluetooth, dual video output (micro HDMI) at resolutions up to 4K, Gigabit Ethernet, USB 2.0 and USB 3.0
Raspberry PiRaspberry Pi 400 is a complete personal computer that builds a 4Gb Raspberry Pi 4 board into the (Italian) keyboard, with a 64-bit quad-core processor, 4GB of RAM, Wi-Fi, Bluetooth, dual video output (micro HDMI) at resolutions up to 4K, Gigabit Ethernet, USB 2.0 and USB 3.0
Open-Electronics.org is the brainchild of a world leader in hobby electronics Futura Group srl. Open-Electronics.org is devoted to support development, hacking and playing with electronics: we share exciting open projects and create amazing products!
Open-Electronics.org is not just a container of ideas: it is also a web site lead by a team of engineers and geeks who will take part in the discussions and give support.
Our mission is to become a reference Open Source hacking site with ideas and feedback aimed to enrich the community.