Raspberry Pi Pico W starter kit
€75.41excl. VAT€92.00incl. VATIncludes the Pico W, a base board with display and eight plug-in modules: designed for learning MicroPython with no soldering at all.
Robotics & development
784 products
Narrow by category
-
Raspberry Pi -
Raspberry PiRaspberry Pi RP2040 Development Board
€11.39excl. VAT€13.90incl. VATBased on the Raspberry Pi RP2040, this development board features an integrated video interface, a TF card slot and a PIO-USB port. Full compatibility with the Raspberry Pi 40-pin GPIO interface makes development and integration with other devices easy. A powerful, accessible solution for embedded projects and applications.
-
Raspberry PiRASPBX – Complete Kit for Building a VOIP Phone System with Raspberry Pi
€86.07excl. VAT€105.00incl. VATSet containing all the parts needed to build a VOIP telephone system based on Raspberry Pi
-
Control electronicsRC servo pulse to digital converter
€8.11excl. VAT€9.90incl. VATThis small board converts the pulses of an RC radio control (the modelling kind) into on/off signals
-
AccessoriesRC servo tester – 3 channels
€4.51excl. VAT€5.50incl. VATCompact tester for checking RC servos or ESC speed controllers
-
Raspberry PiRed LED Matrix for Raspberry Pi
€9.02excl. VAT€11.00incl. VATModule with 2 mini matrix displays, each made up of 64 red 3 mm common-cathode LEDs, driven by the MAX7219 chip
-
ModellingRed LED Signal Light 12V
€5.33excl. VAT€6.50incl. VATNavigation light for RC models, also usable as a warning light, highly efficient, for a wide range of applications.
-
AccessoriesRed robot chassis
€7.38excl. VAT€9.00incl. VATLaser-cut chassis in transparent red acrylic, its diameter (about 12.7 cm) is slightly larger than a CD, with numerous holes and slots for mounting sensors, motors (in particular DGEARBOX), wheels, ball casters (BCASTER) and more
-
Control electronicsReed switch module with LM393
€2.05excl. VAT€2.50incl. VATCompact module based on the LM393 chip, fitted with a reed contact (single normally open contact), a sensitivity adjustment trimmer and status LEDs for power and output signal
-
SensorsReflectance sensor – 2 pcs
€6.15excl. VAT€7.50incl. VATReflectance sensor made up of an infrared emitter diode and a phototransistor
-
SensorsREFLECTIVE OPTICAL SENSOR
€2.05excl. VAT€2.50incl. VATReflective optical sensor from Vishay Telefunken, made up of an infrared emitting diode and a phototransistor
-
micro:bitRelay Board for micro:bit
€16.23excl. VAT€19.80incl. VATBoard with 4 relays controlled from a micro:bit.
-
Serial remote controlRelay control board
Price range: €54.00 through €89.00 incl. VATThis relay board can be used in many applications: stand-alone mode, or addressed by switches or open-collector outputs
-
IoT (Internet of Things)Relay Slave Board for the Mercury System
€13.93excl. VAT€17.00incl. VATMercury system peripheral board with two relays on screw terminals and a four-way dip switch for the bus address.
-
Arduino compatibleReplacement electrode for ECGAD8232
€0.33excl. VAT€0.40incl. VATReplacement electrode for the ECGAD8232 electrocardiogram detector: the pack contains one only.
-
ActuatorsReplacement Track for Rover
€6.56excl. VAT€8.00incl. VATRubber track for use as a replacement part for the Rover 5 robot
-
Rear-view systemsReplacement Ultrasonic Sensor for FR625
€4.02excl. VAT€4.90incl. VATReplacement ultrasonic parking sensor for the “licence plate holder with camera” product, code FR625PAL (see related products). The parking sensor has a detection range of 0.4 to 2 metres, a 60° detection angle and an operating temperature of -30°C to +80°C
-
Sale!
Linux embeddedRJ45 and USB Board for LININO ONE
€10.66excl. VAT€13.00incl. VATSet for Linino one made up of the “dogRJ45” and dogUSB modules
-
RobotsRobot base Chassis+Wheels+Motors+Battery holders
€13.03excl. VAT€15.90incl. VATRobot base made up of two clear acrylic chassis plates, two geared motors, two encoder discs (without the detector), two 65 mm diameter wheels with soft rubber tyres 26 mm wide, 1 castor wheel, 2 battery holders for 4 AA 1.5 V cells (not included), 2 switches, connecting leads for the geared motors, screws, nuts and spacers.
-
RobotsRobot Chassis Set with Wheels, Motors and Battery Holder
€7.79excl. VAT€9.50incl. VATRobot base made up of a clear acrylic body, two gearmotors, two encoder discs (sensor not included), two 65 mm diameter wheels with 26 mm wide soft rubber tyres, a ball caster, a holder for 4 x 1.5 V AA batteries, a switch, screws, nuts and spacers.