The Open Electronics shop
Boards, sensors, kits and lab gear — 4,198 products, shipped from Italy.
Counts based on the first 4198 matches.
Buttons, switches & joysticksBased on the TTP229-LSF chip, this board lets you build a compact 16-key touch keypad for use with Raspberry Pi. The system recalibrates itself automatically when none of the keys is touched for more than 4 seconds.
Control electronicsBuilt around a micro switch and a status LED, this small board is ideal for use as an anti-collision sensor on robots
AccessoriesSimple board with 5 push-buttons and analogue output
Buttons, switches & joysticksSPST-NO momentary micro push button for direct PCB mounting
Buttons, switches & joysticksMomentary contact that stays closed only while the button is held down: 3 A at 125 Vac or 1 A at 250 Vac.
Buttons, switches & joysticksPushbutton switch rated 3 A-125 V, dielectric strength/insulation resistance 1500 Vac/100 Mohm, contact resistance 20 milliohm max, service life (min) 100,000 operations
Buttons, switches & joysticksMomentary pushbutton with normally closed (N.C.) configuration, ideal for electronic applications and control circuits. Compact, reliable and able to handle currents up to 1 A, it is perfect for DIY projects and professional use.
Buttons, switches & joysticksMomentary pushbutton with a normally open (NO) configuration, ideal for electronic applications and control circuits. Compact, reliable and rated for currents up to 1A, it suits both DIY projects and professional use.
Buttons, switches & joysticksDouble-pole momentary toggle switch, rated for loads drawing up to 10 A at 250 V
Buttons, switches & joysticksMomentary power toggle switch able to switch loads drawing up to 10 A at 250 V.
Buttons, switches & joysticksTwo-position ON-ON toggle switch, ideal for switching between two circuits or for selecting between two power sources.
Buttons, switches & joysticks4×4 matrix keypads with the buttons laid out to the telephone keypad standard
Buttons, switches & joysticksSmall analogue resistive joystick, very much like the one found on the PSP1000
Buttons, switches & joysticksMiniature reed switch with 1 normally open contact (with no magnet present), rated for a maximum current of 1 A
Buttons, switches & joysticksVery much like the buttons used in arcade machines, with a 3-terminal microswitch (common, normally open and normally closed) rated to carry 3 A at 125 Vac
Buttons, switches & joysticksVery close to the buttons used in arcade machines, it carries a 3-terminal microswitch (common, normally open and normally closed) rated for 3 A at 125 Vac
Buttons, switches & joysticksVery similar to the buttons used in arcade games, it features a 3-terminal microswitch (common, normally open and normally closed) rated for 3 A at 125 Vac
Buttons, switches & joysticksVery similar to the buttons used in arcade games, it comes with a 3-terminal microswitch (common, normally open and normally closed) rated for 3 A at 125 Vac
Buttons, switches & joysticksThis debounced push button is designed to get rid of the unwanted effects of contact bounce, giving a clean, reliable signal every time it is pressed.
Buttons, switches & joysticksPushbutton changeover switch with LED indicator, contact rating: 5 mA – 24 Vdc, insulation resistance: 100 Mohm (250 Vdc megger), dielectric strength: 250 Vac for 1 minute (except between the LED terminals), electrical life: 200000 operations, operating temperature: -25
Open-Electronics.org is the brainchild of a world leader in hobby electronics Futura Group srl. Open-Electronics.org is devoted to support development, hacking and playing with electronics: we share exciting open projects and create amazing products!
Open-Electronics.org is not just a container of ideas: it is also a web site lead by a team of engineers and geeks who will take part in the discussions and give support.
Our mission is to become a reference Open Source hacking site with ideas and feedback aimed to enrich the community.
