Stepper Motor 12 Vdc – 64 steps
€3.20excl. VAT€3.90incl. VATIdeal for any application that calls for precise angular positioning and rotation speed, such as robotics and servo mechanisms.
New products
All new products →
Multicolour Layered Case for Raspberry Pi 2 and 3 Model B / B+
€5.53excl. VAT€6.75incl. VAT
Read more
ESP32 – Development board with Wi-Fi, Bluetooth and USB Type-C connector
€11.48excl. VAT€14.00incl. VAT
Read more
2-Channel Programmable Signal Generator – 1 nHz to 80 MHz, 300 MSa/s Sample Rate
€278.69excl. VAT€340.00incl. VAT
Read more
All products
Narrow by category
All
Robotics › Sensors187
Enclosures143
Arduino compatible115
Raspberry Pi115
Breakout boards › Sensors112
Buttons, switches & joysticks109
Actuators100
Soldering100
Arduino94
Resistors86
Displays84
Lab cables83
LEDs83
Light bulbs78
Counts based on the first 4198 matches.
-
Motors -
Motors -
ActuatorsSolid state relay board – kit
Price range: €5.50 through €8.50 incl. VATRelay board driven by an input voltage from 5 Vdc to 24 Vdc; it switches a connected load at 240 Vac – 2A (max) on and off.
-
ActuatorsWheel for GM2 / GM3 / GM9 gearmotors
€1.64excl. VAT€2.00incl. VATRigid plastic wheel designed specifically for the GM2, GM3 and GM9 gearmotors
-
ActuatorsWheel, 100 mm diameter
€13.93excl. VAT€17.00incl. VATWheel with a 100 mm diameter and a 5 mm hub complete with grub screw
-
ActuatorsServo Motor 5.8kg/cm plastic gears 180°
€16.39excl. VAT€20.00incl. VATAnalogue servo with 5.8 kg•cm torque and two ball bearings that cut friction and improve performance
-
Actuators2 Pololu 32×7 Wheels for MMGxxx Gearmotors
€4.84excl. VAT€5.90incl. VATPack containing a pair of white plastic wheels with tyres
-
ActuatorsTrack & wheel set for tracked models
€9.84excl. VAT€12.00incl. VATThe set contains everything needed to build the running gear of a tracked model
-
Actuators16-RELAY BOARD
€60.66excl. VAT€74.00incl. VATBoard complete with 16 relays and the matching connector for the contacts
-
Serial remote controlRelay control board
Price range: €54.00 through €89.00 incl. VATThis relay board can be used in many applications: stand-alone mode, or addressed by switches or open-collector outputs
-
MotorsMotor 6 Vdc 250 mA – 14500 rpm
€3.28excl. VAT€4.00incl. VATMiniature electric motor, 6 Vdc / 250 mA, for general-purpose use.
-
ActuatorsServo Motor 10.5kg/cm Metal Gears 180°
€6.97excl. VAT€8.50incl. VATAnalogue servo weighing 55 grams, with metal gears, powered from 4.8 to 7.2 V: it turns 60 degrees in 0.20 seconds.
-
ActuatorsMetal Micro Gearmotor 6V – 50 rpm
€7.38excl. VAT€9.00incl. VATMetal micro gearmotor, suited to building robots, automated mechanisms and the like.
-
ActuatorsMetal Micro Gearmotor 6V – 100 rpm
€7.38excl. VAT€9.00incl. VATMetal micro gearmotor, made for building robots, automated mechanisms and the like.
-
ActuatorsN20 micro gearmotor 3Vdc 100RPM with M4 shaft and metal gearbox
€7.38excl. VAT€9.00incl. VATN20 micro gearmotor, 3Vdc, 100 RPM, designed to deliver high torque in a small space.
-
ActuatorsMetal micro gearmotor 12V – 500 rpm
€7.38excl. VAT€9.00incl. VATMetal micro gearmotor suited to building robots, automated mechanisms and the like.
-
ActuatorsMetal Micro Gearmotor 12V – 30 rpm
€7.38excl. VAT€9.00incl. VATMetal micro gearmotor, suited to building robots, automated mechanisms and the like.
-
Actuators
N20 micro gearmotor 12Vdc 100RPM with M4 shaft and metal gearbox
€7.38excl. VAT€9.00incl. VATN20 micro gearmotor, 12Vdc, 100 RPM output speed, designed to deliver high torque in a small space.
-
ActuatorsWheel 68×25 mm for Plastic Gearmotor
€1.64excl. VAT€2.00incl. VATWheel 65 mm in diameter with a soft rubber tyre 25 mm wide
-
Actuators16-Channel 12-Bit PWM/Servo Driver – PCA9685
€6.97excl. VAT€8.50incl. VATBased on the PCA9685 chip, this compact board can drive up to 16 RC servos or LEDs at the same time