MQ-7 Gas Sensor Board
€5.57excl. VAT€6.80incl. VATDetects carbon monoxide between 20 and 2,000 ppm, with analogue and digital outputs and a threshold trimmer; 2.5 to 5 Vdc supply.
New products
All new products →
Multicolour Layered Case for Raspberry Pi 2 and 3 Model B / B+
€5.53excl. VAT€6.75incl. VAT
Read more
ESP32 – Development board with Wi-Fi, Bluetooth and USB Type-C connector
€11.48excl. VAT€14.00incl. VAT
Read more
2-Channel Programmable Signal Generator – 1 nHz to 80 MHz, 300 MSa/s Sample Rate
€278.69excl. VAT€340.00incl. VAT
Read more
All products
Narrow by category
All
Robotics › Sensors187
Enclosures143
Arduino compatible115
Raspberry Pi115
Breakout boards › Sensors112
Buttons, switches & joysticks109
Actuators100
Soldering100
Arduino94
Resistors86
Displays84
Lab cables83
LEDs83
Light bulbs78
Counts based on the first 4198 matches.
-
Sensors -
SensorsGAS sensor board – MQ-2
€5.57excl. VAT€6.80incl. VATCompact board built around a high-sensitivity semiconductor smoke sensor, with a wide detection range, fast response, good stability and a long service life
-
SensorsSoil Moisture Sensor Board
€3.69excl. VAT€4.50incl. VATPCB probe with analogue output that, when connected to an Arduino or another microcontroller, measures the soil moisture percentage, for example in a flower pot
-
SensorsMagnetic Sensor Board
€5.57excl. VAT€6.80incl. VATBased on the Freescale MAG31110 chip, this compact board measures magnetic fields
-
SensorsLiquid Level Sensor Board – 48 mm sensing depth
€3.69excl. VAT€4.50incl. VATImmersed in a liquid it returns a voltage proportional to the level, down to a depth of 48 mm; it runs on 2 to 5 Vdc.
-
SensorsST188 IR Reflective Obstacle Sensor Board
€4.26excl. VAT€5.20incl. VATModule fitted with a reflective infrared sensor (ST188), an LM393 voltage comparator, a sensitivity adjustment trimmer and both analogue and digital outputs
-
SensorsIR proximity sensor
€4.10excl. VAT€5.00incl. VATProximity sensor built around a voltage comparator chip, an infrared transmitter and an infrared receiver, with a trimmer for sensitivity adjustment, analogue and digital outputs and two status LEDs for power and output signal
-
SensorsUV Sensor Board 200-370 nm
€9.43excl. VAT€11.50incl. VATSmall module fitted with a sensor able to measure the UV intensity of sunlight, lamps or other sources, with a wavelength between 200 nm and 370 nm
-
SensorsMotion sensor board with mercury switch
€3.69excl. VAT€4.50incl. VATMotion sensor using a mercury switch
-
SensorsAPDS-9960 Gesture Breakout Board
€6.15excl. VAT€7.50incl. VATBuilt around the APDS-9960 RGB and Gesture sensor; fitted with integrated UV and IR blocking filters, four separate diodes sensitive to different directions and an I²C-compatible interface, this small breakout board delivers light and colour measurement, proximity detection and contactless gesture detection at a distance of 10 to 20 cm
-
SensorsAir quality sensor breakout board – SGP30
€15.98excl. VAT€19.50incl. VATBuilt around the Sensirion SGP30 air quality sensor, this very small breakout board reports the carbon dioxide concentration (telling you how stale the air in a closed room is) and the TVOC (Total Volatile Organic Compounds), that is the concentration in parts per billion of airborne particles
-
SensorsElectronic Scale Kit with 20 kg Load Cell and HX711 Board
€22.95excl. VAT€28.00incl. VATSet consisting of an interface board and a 20 kg load cell mounted inside a mechanical frame. The board is based on the HX711 chip, a 24-bit analogue-to-digital converter designed to connect the load cell to a microcontroller such as Arduino, Fishino or compatible boards
-
SensorsSoil Moisture Sensor Module
€9.43excl. VAT€11.50incl. VATMade up of a probe with two metal terminals and a small module based on the LM393 IC, it measures the moisture content of the soil, for example in a flower pot
-
SensorsTMP102 temperature sensor
€10.25excl. VAT€12.50incl. VATBreakout board built around the tiny TMP102 digital temperature sensor
-
SensorsTank Liquid Level Controller with Fill and Empty Modes
Price range: €15.00 through €22.00 incl. VATThis system controls the liquid level in a tank or basin, letting you fill the basin up to the maximum level or empty it down to the minimum level depending on the operating mode selected. It works with both N.C. and N.O. sensors.
-
Metal detectorsMetal Detector – Kit
Price range: €7.50 through €13.00 incl. VATCompact, versatile metal detector, ideal for tracking down hidden treasure and metal objects. Able to detect coins, jewellery and metal bodies down to a depth of 6 cm, it is perfect for treasure hunters and DIY explorers.
-
SensorsUV-C sensor breakout board
€40.16excl. VAT€49.00incl. VATBreakout board that detects UV-C radiation and provides both analogue and I²C Bus information on the radiation intensity.
-
SensorsReflectance sensor – 2 pcs
€6.15excl. VAT€7.50incl. VATReflectance sensor made up of an infrared emitter diode and a phototransistor
-
SensorsAM2302 Temperature and Humidity Sensor – Wired
€7.79excl. VAT€9.50incl. VATCompact module built around the DHT22 temperature and relative humidity sensor. Its single-wire serial interface makes it easy to use
-
SensorsLiquid Level Controller
€5.74excl. VAT€7.00incl. VATThis compact board, combined with two level sensors and a water pump (not included), automatically controls the water level in a tank, cistern, etc