115 products
Arduino compatibleThis high-brightness LED traffic light module is perfect for building miniature traffic lights and for educational and scientific projects. Compatible with Arduino and Raspberry Pi, it has three separately controllable LEDs (red, yellow and green), ideal for road signals and light-based alert systems.
ArduinoDesigned to be paired with an Arduino board and a load cell (not included), it lets you build a scale that reads your weight. That reading can then be processed as you wish and shown on the on-board display.
ArduinoBased on the RFM95W transceiver module at 868 MHz, this shield for Arduino, Fishino and compatible boards (not included – see related products) provides long-range bidirectional data transmission using LoRa™ technology
Arduino compatibleMaduino Zero HM-13 is an IoT (Internet of Things) solution built around Atmel’s 32-bit SAMD21 microcontroller and the HM-13 Bluetooth module. Programmable via the Arduino IDE, it features a data interface (UART / I2C / SPI), an on-PCB antenna, two pin headers exposing the SAMD21 microcontroller’s pins, a micro SD card slot, a micro USB connector for power and PC communication, a 3.7-volt input for connecting a lithium-polymer battery, a 5-volt input for connecting a solar panel to recharge the lithium-polymer battery, two status LEDs (for power and battery charging), and a reset button for the SAMD21 microcontroller. Dimensions (mm): 55×40.3×9, weight: 13 grams.
Arduino compatibleMaker UNO is a development board compatible with the Arduino UNO R3, an alternative and improved solution. Based on the ATmega328P, it has 12 LEDs (pin 2 to pin 13), 1 piezo buzzer (pin 8), 1 on/off switch for the buzzer and 1 programmable button (pin 2).
Arduino compatibleMaker UNO Plus is a development board compatible with the Arduino UNO R3, an alternative and improved solution. Based on the ATmega328P, it has 12 LEDs (from pin 2 to pin 13), 1 piezo buzzer (pin 8), 1 on/off switch for the buzzer, 1 programmable pushbutton (pin 2) and a micro USB connector. The current available for devices running at 3.3 V is a full 500 mA, against the 50 mA of the Arduino Uno. The USB-to-serial converter has been upgraded from the CH340 chip to the FT231X.
Development systemsBased on the Texas Instruments CC2540 chip, this shield adds a Bluetooth interface with transparent transmission to Microduino modules
Development systemsMicroduino Core USB is a tiny (28×25.4 mm) board built around the 8-bit Atmega32U4 microcontroller
Development systemsShield for Microduino that makes it easier to connect other modules and sensors
Development systemsMicroduino shield based on the Texas Instruments CC3000 2.4 GHz Wi-Fi chip
Components & enclosuresMicroSD Card reader module: a microSD card reader with an SPI interface for reading and writing files. With this module you can expand your storage capacity and get at the files on a microSD card with ease. Ideal for Arduino users and other microcontrollers, it is a reliable answer to data storage and handling needs.
ArduinoWith the MIDI Shield, Arduino gains access to the powerful MIDI communication protocol, so it can control synthesisers, sequencers and other musical devices
ArduinoArduino shield based on the VLSI Ogg Vorbis/MP3/AAC/WMA/MIDI audio decoder chip (VS1053B)
Ethernet devicesUltra-compact module based on the WIZnet W5500 Ethernet chip, with a 32 Kbyte internal memory buffer, an Ethernet connector complete with magnetics and 2 status LEDs (Full/Half duplex, Link, Speed, Active). Supports up to eight simultaneous socket connections
Arduino compatibleMiniduino is a tiny (19x40x3.5 mm excluding the pin strips and the USB connector) Arduino board with minimal hardware but access to all the I/O just like the Nano, and with a direct-plug USB connector built into the PCB: an Arduino pen drive, in effect.
Arduino compatibleVersatile motor control shield, compatible with Arduino UNO R3, R4 and MEGA. Thanks to the L9110 chip it controls both speed and direction of rotation, which makes it ideal for prototyping and robotics projects. Sample code is included to make it easy to get going.
Arduino compatibleThe Motor Shield with LM293D is a board for Arduino that drives up to 4 DC motors independently. It handles voltages up to 36V and currents up to 600mA per channel. It carries two L293D drivers and a 74HC595 shift register, cutting the Arduino pins needed for motor direction down to just 3. Suitable for all sorts of projects, from robotics to automation
ArduinoShield for Arduino built around the L298P dual full-bridge driver, able to drive DC motors as well as stepper motors
Arduino compatibleMulti-purpose shield designed to make learning with Arduino easier. Compatible with the UNO R3, UNO R4 and MEGA boards, it lets you run experiments with no soldering thanks to its on-board sensors and extension ports.
Arduino compatibleIt has 14 digital inputs and outputs, six of them PWM, eight analogue inputs and 32 kB of memory; the mini USB cable is included.
Open-Electronics.org is the brainchild of a world leader in hobby electronics Futura Group srl. Open-Electronics.org is devoted to support development, hacking and playing with electronics: we share exciting open projects and create amazing products!
Open-Electronics.org is not just a container of ideas: it is also a web site lead by a team of engineers and geeks who will take part in the discussions and give support.
Our mission is to become a reference Open Source hacking site with ideas and feedback aimed to enrich the community.
