ESP8266 Wi-Fi Shield for Arduino
€13.11excl. VAT€16.00incl. VATAdds 2.4 GHz Wi-Fi connectivity to Arduino Uno and Mega through the ESP-12F module, with on-board TCP/IP stack and AT commands.
Robotics & development
784 products
Narrow by category
-
ESP8266 / ESP32 -
Wi-Fi modulesESP8266 Wi-Fi transceiver module
€4.10excl. VAT€5.00incl. VATSmall Wi-Fi transceiver module based on the ESP8266 chip, compliant with the 802.11 b/g/n standard at 2.4 GHz, with a serial interface and a PCB antenna
-
ESP8266 / ESP32ESPMINIMAL – Wi-Fi environmental sensor board
€11.07excl. VAT€13.50incl. VATBuilt around the ESP03 Wi-Fi module, this small, compact board (assembled and tested) measures the environmental parameters of a room, of a spot in your own home or of any other kind of building, and publishes the readings to the Cloud
-
ESP8266 / ESP32Espresso Lite V2.0: the WiFi development board for IoT devices
€13.52excl. VAT€16.50incl. VATEspresso Lite V2.0 is the first low-cost Arduino-compatible development board based on the Espressif System ESP8266 WROOM-02 WiFi module
-
ArduinoEthernet Shield for Arduino – Soldering Kit Version
€21.31excl. VAT€26.00incl. VATEthernet shield for Arduino in soldering kit version. Allows you to set up the Arduino board as a simple web server and connect to the LAN/web.
-
Raspberry PiExpansion and demo board for Raspberry Pi
€15.57excl. VAT€19.00incl. VATIdeal for use with Raspberry Pi (Raspberry Pi 3 B+, Raspberry Pi 3 B, Raspberry Pi 2 type A+, Raspberry Pi 2 type B+ and Raspberry Pi 2 type B), it carries connectors for the UART, SPI and I2C interfaces, a connector for an LCD16x2 display, a Raspberry Pi GPIO connector, 4 user-configurable buttons and 4 LEDs, buzzer, trimmer, RTC and a USB to UART converter
-
Control electronicsExpansion Board for Raspberry Pi Pico and Pico W
€17.95excl. VAT€21.90incl. VATROBOPICO is the ideal expansion board for Raspberry Pi Pico and Pico W. With a DC motor controller, servo pins and Grove I/O ports, it is perfect for robotics and IoT projects. Compatible with CircuitPython, MicroPython, C/C++ and Arduino.
-
BlebricksExpert Starter Kit
€34.02excl. VAT€41.50incl. VATThe Expert Starter Kit is a set containing several Blebricks modules, smart bricks built on a patented technology that lets you assemble them into new electronic devices that talk to each other wirelessly.
-
AccessoriesFemale-to-female Cable for RC Servos – 70 cm
€1.23excl. VAT€1.50incl. VATFemale-to-female cable for RC servos, about 70 cm long
-
ESP8266 / ESP32Fingerprint Reader Module for M5FACESPOCKET
€27.46excl. VAT€33.50incl. VATFingerprint recognition module based on the FPC1020 capacitive sensor
-
Development systemsFishino shield with 4 relays
€6.15excl. VAT€7.50incl. VATShield that lets the Fishino board drive 4 loads through relays. Every output has an LED showing its state and a screw terminal with the relay contacts (N.O
-
FishinoFishino UNO Rev.2 – Board Based on the Arduino UNO ATmega328
€35.98excl. VAT€43.90incl. VATFishino UNO Rev.2 is a board based on the ATmega328pb with WiFi connectivity, a real time clock and a microSD card reader
Out of stock
Temporarily not available to order -
SensorsFlame Sensor Board
€3.69excl. VAT€4.50incl. VATSmall board able to detect the presence of a flame or a light source with a wavelength between 760 nm and 1100 nm
-
AccessoriesFlat bracket – 2 pcs
€3.28excl. VAT€4.00incl. VATLightweight, sturdy flat bracket made from 3 mm blue anodised aluminium, with 21 holes (3 of 8 mm and 18 of 4 mm), for building mechanical structures for all kinds of applications
-
Motors -
Raspberry PiFlex Cable for Raspberry Pi Camera/Monitor – 70 cm
€4.02excl. VAT€4.90incl. VATFlexible cable for use with Raspberry Pi cameras or monitors
-
SensorsFlex Sensor – 110×15 mm
€5.74excl. VAT€7.00incl. VATFlex sensor built from a pressure-sensitive layer on top, a thin film, and a conductive circuit on the bottom layer
-
SensorsFlex Sensor – 170×15 mm
€11.48excl. VAT€14.00incl. VATFlex sensor made of a pressure-sensitive layer on the top, thin film, and a conductive circuit on the bottom layer
-
ActuatorsFLEXINOL – Diameter 0.37 micrometers L=1 m
€6.97excl. VAT€8.50incl. VATFlexinol is a metal wire made from a special Nickel-Titanium alloy that, when current passes through it or it is simply heated, shortens in length and can move or lift an object completely silently
-
ArduinoFM Radio Shield for Arduino – Assembled
€31.97excl. VAT€39.00incl. VATFM radio shield with RDS for Arduino, with a 2.8 W class D amplifier