EPAPERHAT 2.13 inch e-Paper module 250×122
€17.21excl. VAT€21.00incl. VATEPAPERHAT is an e-Paper or Paper Ink (electrophoretic) display with a built-in graphic controller and a connector for use with Raspberry Pi 2B / 3B / 3B+ / Zero / Zero W
Robotics & development
784 products
Narrow by category
-
Displays -
DisplaysEPAPERHAT 7.5 inch 800×480 pixel – black and white
€68.03excl. VAT€83.00incl. VAT7,5” e-Paper or Paper Ink (electrophoretic) display with black and white characters, two grey levels, and a connector for use with Raspberry Pi and Jetson Nano
-
DisplaysEPAPERUART 2.9 inch e-Paper module 296×128
€20.49excl. VAT€25.00incl. VATe-Paper or Paper Ink display (electrophoretic), active matrix TFT
-
DisplaysEPAPERUART 4.3 inch e-Paper module 800×600
€72.95excl. VAT€89.00incl. VAT4.3 inch e-Paper or Paper Ink (electrophoretic) display with a resolution of 800 (H) x 600 (V) pixels
-
Wi-Fi modulesESP-01M WiFi Module with 11 I/O and 1MB Memory
€4.10excl. VAT€5.00incl. VATESP-01M WiFi transceiver module based on the ESP8285 chip, compatible with the 802.11 b/g/n standard at 2.4 GHz. The module integrates the RF antenna and 11 GPIO pins plus one ADC pin and hardware serial.
-
Wi-Fi modulesESP-12F – Wi-Fi transceiver module – GPIO
€6.15excl. VAT€7.50incl. VATSmall Wi-Fi transceiver module based on the ESP8266 chip, compliant with the 802.11 b/g/n standard at 2.4 GHz; it has a built-in TCP/IP stack, 19.5 dBm output power, data interfaces (UART / HSPI / I2C / I2S / Ir Remote Control GPIO / PWM) and a PCB antenna
-
Wi-Fi modulesESP03 Wi-Fi Transceiver Module – GPIO
€6.56excl. VAT€8.00incl. VATSmall Wi-Fi transceiver module based on the ESP8266 chip, compliant with the 802.11 b/g/n standard at 2.4 GHz, with SPI interface, 7 GPIOs, TCP/IP stack and ceramic antenna on the PCB
-
ESP8266 / ESP32ESP32 – 32 GPIO development board with WiFi and Bluetooth
€11.89excl. VAT€14.50incl. VATBoard based on the ESP32 (ESP-WROOM-32) with Wi-Fi 802.11 b/g/n, Bluetooth and 32 GPIO.
-
ESP8266 / ESP32ESP32 – WIFI + bluetooth development board
€11.07excl. VAT€13.50incl. VATCompact Open Source development and prototyping board built around the ESP32 (ESP-WROOM-32), with 802.11 b/g/n Wi-Fi, dual-mode Bluetooth (classic and BLE) and 25 GPIO.
-
ESP8266 / ESP32ESP32 – Development board with Wi-Fi, Bluetooth and USB Type-C connector
€11.48excl. VAT€14.00incl. VATCompact open-source development and prototyping board based on the ESP32 (ESP-WROOM-32), with 802.11 b/g/n Wi-Fi, dual-mode Bluetooth (Classic and BLE) and 25 GPIOs.
-
ESP8266 / ESP32ESP32 – Mini WiFi + Bluetooth Development Board ESP-WROOM-32
€10.25excl. VAT€12.50incl. VATCompact open-source development and prototyping board based on the ESP32 (ESP-WROOM-32), integrating 802.11 b/g/n Wi-Fi, dual-mode Bluetooth (Classic and BLE) and 25 GPIO.
-
ESP8266 / ESP32ESP32 Board with Battery Charger
€13.11excl. VAT€16.00incl. VATCompact open-source development and prototyping board based on the ESP32 (ESP-WROOM-32), featuring 802.11 b/g/n Wi-Fi, dual-mode Bluetooth (classic and BLE), 26 GPIO, a charging circuit for lithium polymer batteries and a micro USB connector.
-
ESP8266 / ESP32ESP32 development board for 18 servos, with Wi-Fi and Bluetooth
€46.72excl. VAT€57.00incl. VATDevelopment board built around the ESP32 with Wi-Fi and Bluetooth, ideal for driving up to 18 servos. It runs on a battery (available separately) and carries on-board voltage regulators for a steady 5V supply. It also includes Neopixel RGB LEDs and programmable pushbuttons for custom lighting effects.
-
ESP8266 / ESP32ESP32 Module with 0.96” OLED Display
€24.18excl. VAT€29.50incl. VATThis board is a development platform built around the Espressif ESP32 chip, a 32 bit dual-core Tensilica LX6 microcontroller with a 240 MHz clock, 520 kB of internal SRAM, Wi-Fi 802.11 b/g/n, dual-mode Bluetooth (Classic and BLE) and 28 I/O pins
-
ESP8266 / ESP32ESP32-C6-Zero Wi-Fi 6 IoT Development Kit
€27.87excl. VAT€34.00incl. VATComplete ESP32-C6-Zero kit for learning and developing IoT projects, with Wi-Fi 6, sensors and on-board peripherals.
-
ESP8266 / ESP32ESP32-CAM Development Board: ESP32 with camera
€13.52excl. VAT€16.50incl. VATCombines Wi-Fi, Bluetooth and a 2-megapixel camera on a board programmable with the Arduino IDE, with a microSD slot.
-
ESP8266 / ESP32ESP32-CAM Programming Interface
€13.11excl. VAT€16.00incl. VATUSB (Type C) programming interface for the ESP32-CAM. Connect the module to your PC over USB to upload sketches and get the most out of the board.
-
ESP8266 / ESP32ESP8266 Board, Arduino Compatible
€7.38excl. VAT€9.00incl. VATBuilt around the ESP8266 Wi-Fi module and with an Arduino Uno compatible form factor, this board lets you build applications that need Wi-Fi connectivity together with the ease of use of Arduino
-
ESP8266 / ESP32ESP8266 Debugger Adapter
€4.84excl. VAT€5.90incl. VATBased on the CP2014 USB-to-TTL converter chip, this adapter lets you upload firmware or Arduino code to the ESP8266 Wi-Fi module (not included, see related products)
-
Ethernet & Wi-FiESP8266 Wi-Fi Module + DHT11 Temperature and Humidity Sensor
€8.11excl. VAT€9.90incl. VATCompact module with an ESP8266 Wi-Fi chip and a DHT11 temperature and humidity sensor