DC Motor 6-12V – 9000 rpm
€3.11excl. VAT€3.80incl. VATDC motor with a speed of 5000 rpm at 6 VDC and 9000 rpm at 12 VDC.
Robotics & development
784 products
Narrow by category
-
Motors -
Control electronicsDC motor speed controller 10-40 VOLT 10A
€4.92excl. VAT€6.00incl. VATCompact board that lets you adjust the speed of a DC motor running from 10 V to 40 V and drawing up to 10 A, using a potentiometer
-
Control electronicsDC motor speed controller 3 to 35 V 5A
€4.51excl. VAT€5.50incl. VATCompact little board that lets you adjust the speed of a DC motor, with a supply between 3 V and 35 V and a maximum current of 5 A, through a potentiometer with an on/off switch.
-
Development systemsDemoboard for ESP32
€20.49excl. VAT€25.00incl. VATExperimenter’s board for the ESP32 module, powered at 12 V: it takes an OLED display, sensors and servos available separately, and comes as a kit.
-
Sale!
Arduino compatibleDevelopment board with ATmega2560
€21.31excl. VAT€26.00incl. VATCompact board built around the Atmega2560 microcontroller
-
SensorsDHT11 Temperature and Humidity Sensor
€2.87excl. VAT€3.50incl. VATThe DHT11 is a temperature (0°C to +50°C) and relative humidity (20% to 90%) sensor. It has a single-wire serial interface that makes it easy to use
-
SensorsDHT11 Temperature and Humidity Sensor Board
€3.69excl. VAT€4.50incl. VATThree-pin output module with DHT11 sensor
-
IoT (Internet of Things)DHT22 Slave Board for the Mercury System
€16.39excl. VAT€20.00incl. VATSlave Board for the Mercury System based on the PIC16F1829 microcontroller and fitted with the DHT22 temperature and humidity sensor. It has a four-position dip switch to set the board’s bus address dynamically, a user LED, a Mercury connector and a connector for the Microchip PicKit 3 programmer, wired directly to the microcontroller’s debug port for advanced debug and programming features. The DHT22 sensor measures temperatures between -40°C and +80°C (with ± 0.5°C accuracy) and humidity between 0% and 100%, (with 2.5% accuracy).
-
SensorsDHT22 temperature and humidity sensor
€7.38excl. VAT€9.00incl. VATThe DHT22 is a temperature (-40°C to +80°C) and relative humidity (0% to 100%) sensor. Its single-wire serial interface makes it easy to use
-
SensorsDigital Temperature Sensor – LMT01
€3.11excl. VAT€3.80incl. VAT2-pin digital temperature sensor (TO-92 case) from Texas Instruments
-
Raspberry PiDIN Rail Enclosure for Raspberry Pi
€8.11excl. VAT€9.90incl. VATPlastic enclosure for DIN rail mounting, with a clear window and cut-outs made to house the Raspberry Pi B+ / 3B and 3B+
-
Raspberry PiDIN rail enclosure for Raspberry Pi 4
€8.11excl. VAT€9.90incl. VATPlastic enclosure for DIN rail mounting, with a clear window and cut-outs made specifically to house the Raspberry Pi 4
-
DisplaysDisplay LCD SPI 1.28″ – 240×240 pixels
€17.21excl. VAT€21.00incl. VATOriginal round color display (RGB 65K), 1.8″
-
ActuatorsDouble Gearbox with Two Independent Motors
€14.75excl. VAT€18.00incl. VATDual gearmotor made up of two independent motors and a set of gears. The ratios available are 12.7:1 – 38.2:1 – 114.7:1 and 344.2:1. A different ratio can be fitted on each side. Two hexagonal shafts, 50 mm long and 3 mm across, come out of the DGEARBOX and carry the robot wheels
-
Raspberry PiDriver Board for Raspberry Pi
€17.21excl. VAT€21.00incl. VATShield for Raspberry Pi based on the DRV8825 stepper motor driver and the ULN2003 line-driver chip
-
Control electronicsDriver for 1 DC Motor, 25 A – 2 Control Modes
€67.21excl. VAT€82.00incl. VATThe MD25HV is a power driver with bidirectional control for 1 DC motor, with a supply between 7 VDC and 58 VDC. It can carry 25 A continuously without an additional heatsink. It has a terminal block for the motor and power connections, a 5 VDC output (max 250 mA) to power an external controller or other device, two test buttons that let you test the motor quickly and conveniently without connecting a controller, inputs for external control (PWM and DIR) and status LEDs for Power, Fault and Run.
-
Control electronicsDriver for 2 DC motors or 1 stepper – max 3 A
€10.25excl. VAT€12.50incl. VATCompact driver able to run 2 DC motors or one bipolar/unipolar stepper motor with a max supply voltage
-
Control electronicsDriver for 2 DC motors, 10 A – 4 control modes
€59.02excl. VAT€72.00incl. VATCompact power driver able to run 2 DC motors with a supply voltage between 7 Vdc and 35 Vdc and a max. current
-
Control electronicsDriver for the G15 Servo Cube
€7.38excl. VAT€9.00incl. VATPaired with Arduino or another microcontroller, this compact driver lets you control the G15 Servo Cube
-
SensorsDS18B20 temperature sensor – assembled board
€8.20excl. VAT€10.00incl. VATBreakout board based on the Maxim Dallas DS18B20 semiconductor temperature sensor (TSSOP version)