4-port USB Hub for Raspberry Pi
€9.43excl. VAT€11.50incl. VAT4-port USB hub for Raspberry Pi with a USB / UART converter for serial communication
The Open Electronics shop
Boards, sensors, kits and lab gear — 4,198 products, shipped from Italy.
Counts based on the first 4198 matches.
Raspberry Pi4-port USB hub for Raspberry Pi with a USB / UART converter for serial communication
Raspberry PiUltra-compact development board with a dual-core RP2040 microcontroller, USB-C and multiple GPIOs, ideal for embedded, IoT, automation and electronics prototyping projects.
Raspberry PiMulticolour case for Raspberry Pi 2 and Raspberry Pi 3 Model B and B+. It goes together simply by stacking the 8 layers it is made of and closing everything with 4 nylon screws.
Raspberry PiPCIe-to-M.2 adapter board for Raspberry Pi 5, designed to connect high-speed NVMe SSDs through the PCIe interface.
Raspberry PiDesigned to work with Raspberry Pi and based on the SX1268 module at 433 MHz, the LoRa HAT provides two-way data transmission up to 5 km over the serial port. It supports automatic retransmission, low-power modes such as deep sleep and Wake on Radio (ideal for battery-powered applications), wireless parameter configuration, RSSI signal strength indication and the LBT function, which can be used to avoid interference. It has a 40-pin GPIO connector for Raspberry Pi, a CP2102 chip for serial debugging, a UART control port for connecting host boards such as Arduino / STM32 and 4 status LEDs: UART RXD and TXD, AUX and PWR.
Raspberry PiDesigned to be used with Raspberry Pi and based on the SX1262 module at 868 MHz, this LoRa HAT provides two-way data transmission over a range of up to 5 km through the serial port. It supports automatic repeating, low-power features such as deep sleep and Wake on Radio (ideal for battery-powered applications), wireless parameter configuration, RSSI signal strength indication and the LBT function, which can be used to avoid interference. It features a 40-pin GPIO connector for Raspberry Pi, a CP2102 chip for serial debugging, a UART control port for connecting host boards such as Arduino / STM32 and 4 status LEDs: UART RXD and TXD, AUX and PWR.
Raspberry PiThe Stack HAT for Raspberry Pi is an I/O expansion board that lets you use up to 5 different HATs at the same time
Raspberry PiColour camera for Raspberry Pi Zero, compatible only with version V1.3
Raspberry PiColour camera for Raspberry Pi, compatible with the original module
Raspberry PiSet containing a black and white acrylic case, purpose-made and drilled to house a Raspberry Pi 4, a cooling fan, four mini heatsinks, four rubber feet and a screwdriver.
Raspberry PiReal Time Clock module designed specifically for use with the Raspberry Pi
Raspberry PiThe Pico Primer Kit for Raspberry Pi is a kit built around the Raspberry Pi Pico, offering a wide range of sensors and actuators together with detailed tutorials for an immediate plug&play experience.
Raspberry PiIncludes the Pico W, a base board with display and eight plug-in modules: designed for learning MicroPython with no soldering at all.
Raspberry PiSemi-transparent plastic enclosure made to house the Raspberry PI model B+ and the Raspberry Pi 2 type B
Raspberry PiBased on Microchip’s MCP2515 (CAN controller) and MCP2551 (high-speed CAN transceiver), this shield lets the Raspberry Pi interface with CAN-bus devices
Raspberry PiSingle-channel 868 MHz LoRaWAN board, HAT type (Hardware Attached on Top) for Raspberry Pi, based on the RTX 868 MHz Long Range LoRa module (RFM95-868)
Raspberry PiSet containing the Raspberry Pi Zero W board and its official Raspberry Pi Zero case, a USB/microUSB cable with a switch, an HDMI cable, a 2 X 2.54 pitch header and an HDMI/miniHDMI adapter.
Raspberry PiThe Raspberry Pi 5, the fifth generation from the Raspberry Foundation, is built around the Broadcom BCM2712 quad-core processor running at 2.4 GHz on the 64-bit Arm Cortex-A76 architecture. The VideoCore VII unit gives advanced graphics performance, with 4Kp60 HDMI and HDR support. With 1 GB of LPDDR4X-4267 SDRAM there is plenty of room for multitasking. Connectivity includes dual-band Wi-Fi, Bluetooth 5.0/BLE and USB 3.0/2.0 ports. With Gigabit Ethernet and PoE+ support, the Raspberry Pi 5 is ideal for demanding projects and advanced connectivity.
Raspberry PiRaspberry Pi 4 Model B is the fourth generation produced by the Raspberry Foundation. Not only is it good for learning to code, develop and play, it is also perfect for IoT projects
Raspberry PiThe Raspberry Pi 4 Model B board is the fourth generation made by the Raspberry Foundation. Not only is it good for learning to program, develop and play, it is also perfect for IoT projects
Open-Electronics.org is the brainchild of a world leader in hobby electronics Futura Group srl. Open-Electronics.org is devoted to support development, hacking and playing with electronics: we share exciting open projects and create amazing products!
Open-Electronics.org is not just a container of ideas: it is also a web site lead by a team of engineers and geeks who will take part in the discussions and give support.
Our mission is to become a reference Open Source hacking site with ideas and feedback aimed to enrich the community.