Metal micro gearmotor 6V – 440 rpm
€12.30excl. VAT€15.00incl. VATMetal micro gearmotor running at 6 Vdc with a 30:1 reduction ratio
Narrow by category
All
Robotics › Sensors187
Enclosures143
Arduino compatible115
Raspberry Pi115
Breakout boards › Sensors112
Buttons, switches & joysticks109
Actuators100
Soldering100
Arduino94
Resistors86
Displays84
Lab cables83
LEDs83
Light bulbs78
Counts based on the first 4198 matches.
-
Actuators -
Actuators
Metal Micro Gearmotor 6V – 85 rpm
€12.30excl. VAT€15.00incl. VATMetal micro gearmotor running on 6 Vdc with a 150:1 gear ratio
-
Actuators5″ wheel for power motor with HUB
€16.31excl. VAT€19.90incl. VATABS wheel with an outer diameter of about 127 mm and a TPE tyre 25.4 mm wide
-
ActuatorsMicro stepper motor, 8 mm diameter
€1.56excl. VAT€1.90incl. VATUltra-small bipolar stepper motor, dimensions (mm): 8 mm (diameter) x 9.2 (length), motor shaft (mm): 0.8 (diameter) x 4 (length), 3 volt supply, weight: 2 grams
-
Robots6DOF Robotic Arm with Gripper and RC Servos
€105.74excl. VAT€129.00incl. VATThis kit contains everything needed to build a complete robotic arm with a gripper for picking up objects
-
Lab cablesCable for STEPMOT03 – 1 metre
€1.23excl. VAT€1.50incl. VATCable for the stepper motor with part number STEPMOT03 (not included – see related products). About 1 metre long (connectors included), with a standard 6-pin JST connector (only 4 pins used) at one end and a 4-pin DuPont connector, 2.54 mm pitch, at the other.
-
ActuatorsLinear actuator 24 V 100 kg – 50 mm stroke
€65.57excl. VAT€80.00incl. VATBuilt around a 24 VDC geared motor, it uses a worm screw to move a shaft back and forth along its length, with a maximum travel of 50 mm
-
ActuatorsLinear Actuator 12 V 100 kg – 50 mm Stroke
€65.57excl. VAT€80.00incl. VATBuilt around a 12 Vdc geared motor, it uses a worm screw to move a shaft back and forth along its length, with a maximum travel of 50 mm
-
ActuatorsLinear Actuator 12 VDC 100 kg – 450 mm Stroke
€77.87excl. VAT€95.00incl. VATBuilt around a 12 VDC gearmotor, it uses a lead screw to move a shaft back and forth along its length, with a maximum travel of 450 mm
-
Actuators8-relay module 5 Vdc 10A (assembled)
€16.31excl. VAT€19.90incl. VATModule with 8 relays for switching the connected load on and off, 250V/10A (max)
-
Actuators4 relay module 5 Vdc 10A (assembled)
€9.02excl. VAT€11.00incl. VATModule with 4 relays for switching the load connected to them on and off, 240V/10A (max)
-
Actuators2-Relay Module 5 Vdc 10A (assembled)
€5.74excl. VAT€7.00incl. VATModule with 2 relays for switching the load connected to them on and off, 240V/10A (max).
-
Actuators1-Channel Relay Module 5 Vdc 10 A (Assembled)
€4.10excl. VAT€5.00incl. VATModule with 1 relay to switch the connected load on and off, 240 V/10 A (max)
-
ActuatorsMini servo motor 1.8kg/cm metal gears 360°
€7.38excl. VAT€9.00incl. VATAnalogue continuous-rotation mini servo (360°) with metal gears and accessories
-
MotorsNEMA 17 Bipolar Stepper Motor – 1.5 A
€14.75excl. VAT€18.00incl. VAT4-wire Nema17 bipolar stepper motor
-
Actuators1-relay module 5 Vdc, low-level trigger (assembled)
€2.05excl. VAT€2.50incl. VATModule with 1 relay, two status LEDs (power and relay), a transistor and a diode
-
Actuators2-Relay Module 30A 250VAC
€9.84excl. VAT€12.00incl. VATModule equipped with 2 power relays that allows you to switch the load connected to them on/off with a maximum current of 30 A (250 VAC/30 VDC)
-
ActuatorsServo motor 5.5kg/cm plastic gears 360°
€8.11excl. VAT€9.90incl. VATLow-cost analog servo with continuous rotation (360°) and 5.5 kg•cm torque. The package includes the servo and accessories
-
RobotsArduino TinkerKit Robotic Arm
€294.26excl. VAT€359.00incl. VATThis set contains everything you need to build a robotic arm controllable via Arduino, complete with a gripper for picking up objects and the option to mount cameras, small solar panels, smartphones, etc
-
ActuatorsReplacement Track for Rover
€6.56excl. VAT€8.00incl. VATRubber track for use as a replacement part for the Rover 5 robot